component
UCC28070PWR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -74,7 +74,7 @@ "number": "7", "name": "RSYNTH", "type": "input",- "description": "Current synthesis down-slope programming resistor to GND for setting current synthesizer rate, 15k\u03a9 to 750k\u03a9 range; connect to VREF to disable current synthesis."+ "description": "Current synthesis down-slope programming resistor to GND for setting current synthesizer rate, 15kΩ to 750kΩ range; connect to VREF to disable current synthesis." }, { "number": "8",@@ -110,19 +110,19 @@ "number": "13", "name": "VREF", "type": "power_out",- "description": "6V regulated reference voltage output for internal biasing and external use; bypass with 0.1\u03bcF ceramic capacitor, external load limited to 2mA."+ "description": "6V regulated reference voltage output for internal biasing and external use; bypass with 0.1μF ceramic capacitor, external load limited to 2mA." }, { "number": "14", "name": "GDA", "type": "output",- "description": "Phase-A gate driver output for connecting to external gate-drive device; \u00b10.25A continuous and \u00b10.75A pulsed current rating, typically clamped at 13.5V."+ "description": "Phase-A gate driver output for connecting to external gate-drive device; ±0.25A continuous and ±0.75A pulsed current rating, typically clamped at 13.5V." }, { "number": "15", "name": "VCC", "type": "power_in",- "description": "Bias voltage input with operating range 10V to 21V and UVLO enable threshold at 10.2V \u00b10.4V; bypass with 0.1\u03bcF ceramic capacitor."+ "description": "Bias voltage input with operating range 10V to 21V and UVLO enable threshold at 10.2V ±0.4V; bypass with 0.1μF ceramic capacitor." }, { "number": "16",@@ -134,19 +134,19 @@ "number": "17", "name": "GDB", "type": "output",- "description": "Phase-B gate driver output for connecting to external gate-drive device; \u00b10.25A continuous and \u00b10.75A pulsed current rating, typically clamped at 13.5V."+ "description": "Phase-B gate driver output for connecting to external gate-drive device; ±0.25A continuous and ±0.75A pulsed current rating, typically clamped at 13.5V." }, { "number": "18", "name": "SS", "type": "input",- "description": "Soft-start and external fault interface; connect capacitor to GND to program soft-start ramp with internal 10\u03bcA current source, or pull below 0.6V to immediately disable gate drivers."+ "description": "Soft-start and external fault interface; connect capacitor to GND to program soft-start ramp with internal 10μA current source, or pull below 0.6V to immediately disable gate drivers." }, { "number": "19", "name": "RT", "type": "input",- "description": "Oscillator frequency programming resistor to GND; switching frequency fPWM = 7500/RRT(k\u03a9) with minimum 30kHz for UCC28070."+ "description": "Oscillator frequency programming resistor to GND; switching frequency fPWM = 7500/RRT(kΩ) with minimum 30kHz for UCC28070." }, { "number": "20",@@ -230,5 +230,8 @@ "docs/ucc28070pwr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }