component
UCC2805DTR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/ucc2805dtr
750be18
UCC2805DTR
Texas Instruments · AC-DC Controllers And Regulators · SOIC-8
UCC2805DTR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Error amplifier output and PWM comparator input; low-impedance 2MHz operational amplifier capable of sourcing and sinking current. |
| 2 | FB | input | Error amplifier inverting input; keep trace length and stray capacitance as small as possible for optimal stability. |
| 3 | CS | input | Current-sense comparator input with 100ns leading edge blanking after OUT rising edge to suppress switching transients. |
| 4 | RC | input | Oscillator timing pin; frequency determined by RC network with recommended 10kΩ to 200kΩ resistor and 100pF to 1000pF capacitor. |
| 5 | GND | power_in | Reference ground and power supply ground for all device functions. |
| 6 | OUT | output | High-current gate driver output capable of peak current exceeding ±750mA; actively held low when VCC below threshold; CMOS output with low impedance. |
| 7 | VCC | power_in | Power supply input through current-limiting resistor; internally regulated to approximately 13.5V by on-chip Zener diode. |
| 8 | REF | output | 4V reference voltage output for error amplifier and logic circuits; pulled low through 5kΩ when VCC between 1V and UVLO threshold. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
UCC2805DTR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ucc2805dtr-etched.step/ucc2805dtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc2805dtr.step/ucc2805dtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (59 pp, sha256
3f7e3ad23bdb4f2f, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# UCC2805DTR
**Texas Instruments** · AC-DC Controllers And Regulators · SOIC-8
UCC2805DTR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Error amplifier output and PWM comparator input; low-impedance 2MHz operational amplifier capable of sourcing and sinking current. |
| 2 | FB | input | Error amplifier inverting input; keep trace length and stray capacitance as small as possible for optimal stability. |
| 3 | CS | input | Current-sense comparator input with 100ns leading edge blanking after OUT rising edge to suppress switching transients. |
| 4 | RC | input | Oscillator timing pin; frequency determined by RC network with recommended 10kΩ to 200kΩ resistor and 100pF to 1000pF capacitor. |
| 5 | GND | power_in | Reference ground and power supply ground for all device functions. |
| 6 | OUT | output | High-current gate driver output capable of peak current exceeding ±750mA; actively held low when VCC below threshold; CMOS output with low impedance. |
| 7 | VCC | power_in | Power supply input through current-limiting resistor; internally regulated to approximately 13.5V by on-chip Zener diode. |
| 8 | REF | output | 4V reference voltage output for error amplifier and logic circuits; pulled low through 5kΩ when VCC between 1V and UVLO threshold. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `UCC2805DTR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ucc2805dtr-etched.step` / `ucc2805dtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc2805dtr.step` / `ucc2805dtr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucc2805) (59 pp, sha256 `3f7e3ad23bdb4f2f`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ucc2805dtr-datasheet.pdf)