component
UCC28056DBVT
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownUCC28056DBVT
Texas Instruments · AC-DC Controllers And Regulators · SOT-23-6
UCC28056DBVT from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOSNS | input | Voltage error amplifier inverting input with internal output over-voltage protection; switching halts if voltage exceeds VOvp1Rise and resumes below VOvp1Fall. |
| 2 | ZCD/CS | input | Zero-crossing detector and current sense input fed by Drain-Source voltage divider; monitors current sense resistor when DRV high for over-current protection and Drain waveform when DRV low for valley detection and second-level over-voltage protection. |
| 3 | VCC | power_in | Positive supply voltage input with operating range from VCCStart to VCCStop; switching starts above VCCStart and stops below VCCStop for duration exceeding TUVLOBlk. |
| 4 | GND | power_in | Ground reference pin connected to power stage at lower terminal of current sense resistor RCS only. |
| 5 | DRV | output | Gate driver output internally limited to VDRHigh that drives the main power MOSFET with external resistor adjustable turn-on delay aligned to valley minimum. |
| 6 | COMP | bidirectional | Error amplifier output internally limited to VCOClmp for voltage loop compensation with internal discharge resistor RCODisch; switching stops when voltage drops below VBSTFall and resumes above VBSTRise. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
UCC28056DBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ucc28056dbvt-etched.step/ucc28056dbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc28056dbvt.step/ucc28056dbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (55 pp, sha256
88bddd312c898620, retrieved 2026-10-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).