component
UCC28056CDBVT
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownUCC28056CDBVT
Texas Instruments · AC-DC Controllers And Regulators · SOT-23-6
UCC28056CDBVT from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOSNS | input | Inverting input of voltage error amplifier that monitors output voltage through external resistor divider for output overvoltage protection; oversees first level overvoltage protection threshold. |
| 2 | ZCD/CS | input | Zero-current detection and current sensing input that monitors drain voltage waveform when DRV is low and current through RCS when DRV is high; provides ZCD detection, valley synchronization, line voltage feedforward, undervoltage detection, and secondary overvoltage protection. |
| 3 | VCC | power_in | Positive power supply input ranging from 8.5V to 34V; switch operation begins when VCC exceeds VCCStart threshold and ceases when below VCCStop for longer than TUVLOBlk blanking time. |
| 4 | GND | power_in | Ground reference pin connected exclusively to the lower terminal of the current sensing resistor in the power stage. |
| 5 | DRV | output | Gate drive output for power MOSFET with internal voltage limiting to VDRHigh maximum; external resistor from pin to GND programs valley synchronization delay through TZCDR timing. |
| 6 | COMP | output | Transconductance error amplifier output for voltage loop compensation; connect RC compensation network from this pin to ground; internally discharged during stop state or when Ovp2 comparator triggers. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
UCC28056CDBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ucc28056cdbvt-etched.step/ucc28056cdbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc28056cdbvt.step/ucc28056cdbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
c9fa6ad1b816408d, retrieved 2026-10-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).