main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ucc28056cdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ucc28056cdbvr: viewers · Ray
package.json ucc28056cdbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json ucc28056cdbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/ucc28056cdbvr · Ray
ucc28056cdbvr-etched.fit.json ucc28056cdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc28056cdbvr-etched.glb ucc28056cdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc28056cdbvr-etched.step ucc28056cdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc28056cdbvr.glb Publish 0.1.0 · Ray
ucc28056cdbvr.kicad_mod Publish 0.1.0 · Ray
ucc28056cdbvr.kicad_sym Publish 0.1.0 · Ray
ucc28056cdbvr.lbr Publish 0.1.0 · Ray
ucc28056cdbvr.step Publish 0.1.0 · Ray

UCC28056CDBVR

Texas Instruments · AC-DC Controllers And Regulators · SOT-23-6

UCC28056CDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOSNS input Output voltage sense input to error amplifier inverting input with internal reference VOSReg = 2.5V; output overvoltage protection triggers at VOvp1Rise = 2.75V and recovers at VOvp1Fall = 2.675V.
2 ZCD/CS input Zero-current detection and current sense input monitoring drain-source voltage and current; primary overcurrent protection threshold VZCOcp1 = 0.5V, secondary VZCOcp2 = 0.75V, line undervoltage threshold VZCBoRise = 0.3V.
3 VCC power_in Positive supply voltage with startup enable threshold VCCStart = 11V, dropout threshold VCCStop = 8.85V, operating range 8.5V to 34V.
4 GND power_in Ground reference for controller connected only to power stage ground below current sense resistor RCS terminal.
5 DRV output Gate driver output for main power MOSFET with output low VDRLow = 0.9V and high voltage limited to VDRHigh = 13.7V; external RDG resistor programs valley-switch delay TZCDR through eight discrete levels.
6 COMP output Error amplifier output with internal clamping to maximum VCOClmp = 5.6V and minimum VCOSat = 0V; internal discharge resistor RCODisch operates during Stopb state or Ovp2 comparator trip for fault protection.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Management (PMIC)
Pins 6

CAD (KiCad official)

  • Symbol: UCC28056CDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ucc28056cdbvr-etched.step / ucc28056cdbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc28056cdbvr.step / ucc28056cdbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 c9fa6ad1b816408d, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF