component
UCC2803DTR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownUCC2803DTR
Texas Instruments · AC-DC Controllers And Regulators · SOIC-8
UCC2803DTR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Error amplifier output and PWM comparator input; true low-impedance 2MHz operational amplifier capable of simultaneous source and sink current with internal current limiting. |
| 2 | FB | input | Inverting input of error amplifier; keep trace length as short as possible and minimize stray capacitance for optimal stability. |
| 3 | CS | input | Current sense comparator input with internal 100ns leading edge blanking window after OUT pin rising edge; digital filtering eliminates need for external RC filter in most applications. |
| 4 | RC | input | Oscillator timing pin; connect timing resistor from REF and timing capacitor to GND to set switching frequency from 10kHz to 1MHz. |
| 5 | GND | power_in | Signal and power return ground; reference ground for all device functions and output driver stages. |
| 6 | OUT | output | High-current power driver output capable of ±1A peak current; drives MOSFET gate and actively held low when VCC is below UVLO threshold. |
| 7 | VCC | power_in | Power supply input; supply through current-limiting resistor; total current equals static current plus average output drive current. |
| 8 | REF | power_out | Precision voltage reference output at 4V nominal (1.5% tolerance) for UCC2803; serves as reference for error amplifier and logic power for high-speed switching circuits. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
UCC2803DTR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ucc2803dtr-etched.step/ucc2803dtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc2803dtr.step/ucc2803dtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (59 pp, sha256
3f7e3ad23bdb4f2f, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).