Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

UCC27712QDQ1

Texas Instruments · Gate Drivers · SOIC-8

UCC27712QDQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LI input Logic input for the low-side driver; LO is held low if LI is unbiased or floating, and LI accepts -4 V to 20 V with respect to COM under recommended conditions.
2 HI input Logic input for the high-side driver; HO is held low if HI is unbiased or floating, and HI accepts -4 V to 20 V with respect to COM under recommended conditions.
3 VDD power_in Bias supply input for the input logic and the low-side driver output, recommended 10 V to 20 V for IGBTs and 10 V to 17 V for MOSFETs, to be bypassed to COM with a 0.1-µF or larger ceramic capacitor.
4 COM power_in Ground reference for the device; all voltages are referenced to COM.
5 LO output Low-side driver output swinging between VDD and COM, rated for 2.8-A peak sink and 1.8-A peak source current pulses.
6 HS power_in Return for the high-side floating supply; HS may operate from -11 V to 600 V with HB-HS at 15 V, and the logic remains operational over that range.
7 HO output High-side driver output referenced to HS, swinging between HB and HS, rated for 2.8-A peak sink and 1.8-A peak source current pulses.
8 HB power_in High-side floating supply, to be bypassed to HS with a suitable capacitor; HB-HS recommended 10 V to 20 V for IGBTs and 10 V to 17 V for MOSFETs, with an absolute maximum of 700 V on HB.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Motor Driver ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage HI, LI -5 22 V 3
VDD supply voltage -0.3 22 V 3
HB voltage -0.3 700 V 3
HB-HS voltage -0.3 22 V 3
Output current HO, LO pulsed IOUT_PULSED -1.8 2.8 A 100 ns 3
Allowable offset supply voltage transient dVHS/dt -50 50 V/ns 3
Junction temperature TJ -40 150 °C 3
Storage temperature Tstg -65 150 °C 3
ESD human-body model V(ESD) -1500 1500 V HBM per AEC Q100-002 4
ESD charged-device model V(ESD) -750 750 V CDM per AEC Q100-011 4
VDD supply voltage (IGBT applications) VDD 10 20 V IGBT applications 4
VDD supply voltage (MOSFET applications) VDD 10 17 V MOSFET applications 4
HB-HS driver bootstrap voltage (IGBT applications) 10 20 V IGBT applications 4
HB-HS driver bootstrap voltage (MOSFET applications) 10 17 V MOSFET applications 4
HS source terminal voltage -11 600 V Logic operational at HB-HS = 15 V (footnote 1) 4
HI, LI input voltage with respect to COM -4 20 V 4
Ambient temperature TA -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 108.3 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 61.5 °C/W 4
Junction-to-board thermal resistance RθJB 57.9 °C/W 4
Junction-to-top characterization parameter ψJT 15.3 °C/W 4
Junction-to-board characterization parameter ψJB 57.2 °C/W 4
Turn-on threshold voltage of VDD VVDD ON 8 8.9 9.8 V 4
Turn-off threshold voltage of VDD VVDD OFF 7.5 8.4 9.3 V 4
Turn-on threshold voltage of VHB-VHS VVHB ON 7.2 8.2 9.2 V 4
Turn-off threshold voltage of VHB-VHS VVHB OFF 6.4 7.3 8.3 V 4
Hysteresis of VHB-VHS VVHB HYS 0.5 0.9 V 4
Total quiescent supply current IQ 180 255 420 µA HI = LI = 0 V or 5 V, DC on/off state 4
Quiescent VDD-COM supply current IQVDD 190 320 µA HI = LI = 0 V or 5 V, DC on/off state 4
Quiescent HB-HS supply current IQBS 65 100 µA HI = 0 V or 5 V, HO in DC on/off state 4
Dynamic operating current IOP 3800 4500 µA HI = LI = 0 V or 5 V, f = 100 kHz, duty = 50%, CL = 1 nF 4
Input pin (HI, LI) high threshold VINH 1.6 2 2.4 V 5
Input pin (HI, LI) low threshold VINL 0.8 1.2 1.5 V 5
HI, LI input low bias current IINL -5 0 5 µA HI, LI = 0 V 5
HI, LI input high bias current IINH 1.7 70 µA HI, LI = 5 V 5
LO output high voltage VDD-VLOH 60 136 mV LI = 5 V, ILO = -20 mA 5
HO output high voltage VHB-VHOH 60 136 mV HI = 5 V, IHO = -20 mA 5
LO output low voltage VLOL 30 80 mV LI = 0 V, ILO = 20 mA 5
HO output low voltage VHOL 30 80 mV HI = 0 V, IHO = 20 mA 5
LO, HO output pull-down resistance RLOL, RHOL 1.5 4 Ω ILO = IHO = 20 mA 5
LO, HO output pull-up resistance RLOH, RHOH 3 6.8 Ω ILO = IHO = -20 mA 5
Turn-on propagation delay (without deadtime) tPDLH 100 160 ns LI to LO, HI to HO, HS = COM = 0 V 5
Turn-off propagation delay tPDHL 100 160 ns LI to LO, HI to HO, HS = COM = 0 V 5
Low-to-high delay matching tPDRM 5 30 ns 5
High-to-low delay matching tPDFM 12 30 ns 5
Turn-on rise time tRISE 16 50 ns 10% to 90%, HO/LO with 1000-pF load 5
Turn-off fall time tFALL 10 30 ns 10% to 90%, HO/LO with 1000-pF load 5
Minimum HI/LI ON pulse that changes output state tON 25 45 ns 0-V to 5-V input signal on HI and LI pins 5
Minimum HI/LI OFF pulse that changes output state tOFF 35 45 ns 5-V to 0-V input signal on HI and LI pins 5
Deadtime (internal deadtime for interlock) DT 100 150 200 ns Internal deadtime for interlock 5

CAD (KiCad official)

  • Symbol: UCC27712QDQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ucc27712qdq1-etched.step / ucc27712qdq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc27712qdq1.step / ucc27712qdq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 6c6c48dfce0f6322, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF