component
UCC27524A1QDGNRQ1
Public Made by Adomby adom
Texas Instruments Gate Drivers, HVSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownUCC27524A1QDGNRQ1
Texas Instruments · Gate Drivers · HVSSOP-8
UCC27524A1QDGNRQ1 from Texas Instruments, in a HVSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENA | input | Enable input for Channel A; ENA biased LOW disables Channel A output regardless of INA state; ENA biased HIGH or left floating enables Channel A output; allowed to float. |
| 2 | INA | input | Non-inverting input to Channel A; OUTA held LOW if INA is unbiased or floating; input voltage range -2V to 18V per recommended operating conditions. |
| 3 | GND | power_in | Ground; all signals are referenced to this pin. |
| 4 | INB | input | Non-inverting input to Channel B; OUTB held LOW if INB is unbiased or floating; input voltage range -2V to 18V per recommended operating conditions. |
| 5 | OUTB | output | Output of Channel B; capable of 5A pulsed source/sink current. |
| 6 | VDD | power_in | Bias supply input; recommended operating supply voltage range 4.5V to 18V. |
| 7 | OUTA | output | Output of Channel A; capable of 5A pulsed source/sink current. |
| 8 | ENB | input | Enable input for Channel B; ENB biased LOW disables Channel B output regardless of INB state; ENB biased HIGH or left floating enables Channel B output; allowed to float. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8 |
| Category | Motor Driver ICs |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
UCC27524A1QDGNRQ1 - Footprint:
Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm - 3D model: HVSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal HVSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
ucc27524a1qdgnrq1-etched.step/ucc27524a1qdgnrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc27524a1qdgnrq1.step/ucc27524a1qdgnrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
16f31fbaf3d746b3, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).