main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ucc27511dbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ucc27511dbvr: viewers · Ray
package.json ucc27511dbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json ucc27511dbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/ucc27511dbvr · Ray
ucc27511dbvr-etched.fit.json ucc27511dbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc27511dbvr-etched.glb ucc27511dbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc27511dbvr-etched.step ucc27511dbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc27511dbvr.glb Publish 0.1.0 · Ray
ucc27511dbvr.kicad_mod Publish 0.1.0 · Ray
ucc27511dbvr.kicad_sym Publish 0.1.0 · Ray
ucc27511dbvr.lbr Publish 0.1.0 · Ray
ucc27511dbvr.step Publish 0.1.0 · Ray

UCC27511DBVR

Texas Instruments · Gate Drivers · SOT-23-6

UCC27511DBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Bias supply input, recommended operating voltage range 4.5 V to 18 V; internal UVLO protection holds outputs low outside operating range.
2 OUTH output Sourcing current output of driver with 4 A peak source capability; connect resistor between OUTH and gate of power-switching device to adjust turnon speed.
3 OUTL output Sinking current output of driver with 8 A peak sink capability; connect resistor between OUTL and gate of power-switching device to adjust turnoff speed.
4 GND power_in Ground: all signals referenced to this pin.
5 IN- input Inverting input: connect IN- to GND to enable output in noninverting configuration; output held LOW if IN- is unbiased or floating.
6 IN+ input Noninverting input: connect IN+ to VDD to enable output in inverting configuration; output held LOW if IN+ is unbiased or floating.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Motor Driver ICs
Pins 6

CAD (KiCad official)

  • Symbol: UCC27511DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ucc27511dbvr-etched.step / ucc27511dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc27511dbvr.step / ucc27511dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 781cc451dbb371a4, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF