main
Ray
Publish 0.1.0
0883db7
UCC27511AQDBVRQ1
Texas Instruments · Pre-ordered Chips · SOT-23-6
UCC27511AQDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Bias supply input for the driver. |
| 2 | OUTH | output | Sourcing current output of the driver; connect a resistor between OUTH and the gate of the power switching device to adjust turn-on speed. |
| 3 | OUTL | output | Sinking current output of the driver; connect a resistor between OUTL and the gate of the power switching device to adjust turn-off speed. |
| 4 | GND | power_in | Ground; all signals are referenced to this pin. |
| 5 | IN- | input | Inverting input; in non-inverting configuration connect IN- to GND to enable the output, and the OUTx pins are held low if IN- is unbiased or floating. |
| 6 | IN+ | input | Non-inverting input; in inverting configuration connect IN+ to VDD to enable the output, and the OUTx pins are held low if IN+ is unbiased or floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Interface ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 20 | V | 4 | ||
| Input voltage IN+, IN- | -6 | 20 | V | 4 | |||
| Output voltage VDD + OUTH | VDD + OUTH | -0.3 | 0.3 | V | 4 | ||
| Output voltage OUTL | -0.3 | 20 | V | DC | 4 | ||
| Output voltage OUTL | -2 | 20 | V | Repetitive pulse less than 200 ns | 4 | ||
| Output continuous current, source (OUTH source current) | IO_DC (source) | 0.3 | A | 4 | |||
| Output continuous current, sink (OUTL sink current) | IO_DC (sink) | 0.6 | A | 4 | |||
| Output pulsed current, source (OUTH source current) | IO_pulsed(source) | 4 | A | 0.5 µs pulse | 4 | ||
| Output pulsed current, sink (OUTL sink current) | IO_pulsed(sink) | 8 | A | 0.5 µs pulse | 4 | ||
| Operating virtual junction temperature range | TJ | -40 | 150 | °C | 4 | ||
| Lead temperature, soldering | 300 | °C | 10 sec | 4 | |||
| Lead temperature, reflow | 260 | °C | Reflow | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge, human body model | V(ESD) | -4000 | 4000 | V | Human body model (HBM), per AEC Q100-002 | 4 | |
| Electrostatic discharge, charged device model | V(ESD) | -1000 | 1000 | V | Charged device model (CDM), per AEC Q100-011 | 4 | |
| Supply voltage | VDD | 4.5 | 12 | 18 | V | 4 | |
| Input voltage, IN+ and IN- | VI | -5 | 18 | V | 4 | ||
| Operating junction temperature range | TA | -40 | 140 | °C | 4 | ||
| Startup current | I(START) | 40 | 100 | 160 | µA | IN+ = VDD, IN- = GND | 5 |
| Startup current | I(START) | 25 | 75 | 145 | µA | VDD = 3.4 V, IN+ = IN- = GND or IN+ = IN- = VDD | 5 |
| Startup current | I(START) | 20 | 60 | 115 | µA | IN+ = GND, IN- = VDD | 5 |
| Supply start threshold, V(ON) | V(ON) | 3.91 | 4.2 | 4.5 | V | TA = 25°C | 5 |
| Supply start threshold, V(ON) | V(ON) | 3.7 | 4.2 | 4.65 | V | TA = -40°C to 140°C | 5 |
| Minimum operating voltage after supply start | V(OFF) | 3.45 | 3.9 | 4.35 | V | 5 | |
| Supply voltage hysteresis | VDD(hys) | 0.2 | 0.3 | 0.5 | V | 5 | |
| Input signal high threshold | VIH(IN) | 2.2 | 2.4 | V | 5 | ||
| Input signal low threshold | VIL(IN) | 1 | 1.2 | V | 5 | ||
| High output voltage | VOH | 50 | 90 | mV | VDD = 12 V, I(OUTH) = -10 mA | 5 | |
| High output voltage | VOH | 60 | 130 | mV | VDD = 4.5 V, I(OUTH) = -10 mA | 5 | |
| Low output voltage | VOL | 5 | 6.5 | mV | VDD = 12 V, I(OUTL) = 10 mA | 5 | |
| Low output voltage | VOL | 5.5 | 10 | mV | VDD = 4.5 V, I(OUTL) = 10 mA | 5 | |
| Output pullup resistance | RO(H) | 5 | 7.5 | Ω | VDD = 12 V, I(OUTH) = -10 mA | 5 | |
| Output pullup resistance | RO(H) | 5 | 11 | Ω | VDD = 4.5 V, I(OUTH) = -10 mA | 5 | |
| Output pulldown resistance | RO(L) | 0.375 | 0.65 | Ω | VDD = 12 V, I(OUTL) = 10 mA | 5 | |
| Output pulldown resistance | RO(L) | 0.45 | 0.75 | Ω | VDD = 4.5 V, I(OUTL) = 10 mA | 5 | |
| Rise time | tr | 8 | 12 | ns | VDD = 12 V, C(LOAD) = 1.8 nF, OUTH and OUTL tied together | 6 | |
| Rise time | tr | 16 | 22 | ns | VDD = 4.5 V, C(LOAD) = 1.8 nF | 6 | |
| Fall time | tf | 7 | 11 | ns | VDD = 12 V, C(LOAD) = 1.8 nF, OUTH and OUTL tied together | 6 | |
| IN+ to output propagation delay | td(1) | 4 | 13 | 23 | ns | VDD = 12 V, 5-V input pulse, C(LOAD) = 1.8 nF, OUTH and OUTL tied together | 6 |
| IN+ to output propagation delay | td(1) | 4 | 15 | 26 | ns | VDD = 4.5 V, 5-V input pulse, C(LOAD) = 1.8 nF, OUTH and OUTL tied together | 6 |
| IN- to output propagation delay | td(2) | 4 | 13 | 23 | ns | VDD = 12 V, C(LOAD) = 1.8 nF, OUTH and OUTL tied together | 6 |
| IN- to output propagation delay | td(2) | 4 | 19 | 30 | ns | VDD = 4.5 V, C(LOAD) = 1.8 nF, OUTH and OUTL tied together | 6 |
| Source peak current | IP(SRC) | -4 | A | C(LOAD) = 0.22 µF, ƒS = 1 kHz | 5 | ||
| Sink peak current | IP(SNK) | 8 | A | C(LOAD) = 0.22 µF, ƒS = 1 kHz | 5 | ||
| Input signal hysteresis | Vhys(IN) | 1 | V | 5 | |||
| Junction-to-ambient thermal resistance | RθJA | 217.8 | °C/W | DBV package, 6 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 97.6 | °C/W | DBV package, 6 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 72.2 | °C/W | DBV package, 6 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 8.6 | °C/W | DBV package, 6 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 71.6 | °C/W | DBV package, 6 pins | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
UCC27511AQDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ucc27511aqdbvrq1-etched.step/ucc27511aqdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc27511aqdbvrq1.step/ucc27511aqdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
018e22735fedc3d8, retrieved 2026-11-13, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# UCC27511AQDBVRQ1
**Texas Instruments** · Pre-ordered Chips · SOT-23-6
UCC27511AQDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Bias supply input for the driver. |
| 2 | OUTH | output | Sourcing current output of the driver; connect a resistor between OUTH and the gate of the power switching device to adjust turn-on speed. |
| 3 | OUTL | output | Sinking current output of the driver; connect a resistor between OUTL and the gate of the power switching device to adjust turn-off speed. |
| 4 | GND | power_in | Ground; all signals are referenced to this pin. |
| 5 | IN- | input | Inverting input; in non-inverting configuration connect IN- to GND to enable the output, and the OUTx pins are held low if IN- is unbiased or floating. |
| 6 | IN+ | input | Non-inverting input; in inverting configuration connect IN+ to VDD to enable the output, and the OUTx pins are held low if IN+ is unbiased or floating. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Interface ICs |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | | 20 | V | | 4 |
| Input voltage IN+, IN- | | -6 | | 20 | V | | 4 |
| Output voltage VDD + OUTH | VDD + OUTH | -0.3 | | 0.3 | V | | 4 |
| Output voltage OUTL | | -0.3 | | 20 | V | DC | 4 |
| Output voltage OUTL | | -2 | | 20 | V | Repetitive pulse less than 200 ns | 4 |
| Output continuous current, source (OUTH source current) | IO_DC (source) | | | 0.3 | A | | 4 |
| Output continuous current, sink (OUTL sink current) | IO_DC (sink) | | | 0.6 | A | | 4 |
| Output pulsed current, source (OUTH source current) | IO_pulsed(source) | | | 4 | A | 0.5 µs pulse | 4 |
| Output pulsed current, sink (OUTL sink current) | IO_pulsed(sink) | | | 8 | A | 0.5 µs pulse | 4 |
| Operating virtual junction temperature range | TJ | -40 | | 150 | °C | | 4 |
| Lead temperature, soldering | | | | 300 | °C | 10 sec | 4 |
| Lead temperature, reflow | | | | 260 | °C | Reflow | 4 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 4 |
| Electrostatic discharge, human body model | V(ESD) | -4000 | | 4000 | V | Human body model (HBM), per AEC Q100-002 | 4 |
| Electrostatic discharge, charged device model | V(ESD) | -1000 | | 1000 | V | Charged device model (CDM), per AEC Q100-011 | 4 |
| Supply voltage | VDD | 4.5 | 12 | 18 | V | | 4 |
| Input voltage, IN+ and IN- | VI | -5 | | 18 | V | | 4 |
| Operating junction temperature range | TA | -40 | | 140 | °C | | 4 |
| Startup current | I(START) | 40 | 100 | 160 | µA | IN+ = VDD, IN- = GND | 5 |
| Startup current | I(START) | 25 | 75 | 145 | µA | VDD = 3.4 V, IN+ = IN- = GND or IN+ = IN- = VDD | 5 |
| Startup current | I(START) | 20 | 60 | 115 | µA | IN+ = GND, IN- = VDD | 5 |
| Supply start threshold, V(ON) | V(ON) | 3.91 | 4.2 | 4.5 | V | TA = 25°C | 5 |
| Supply start threshold, V(ON) | V(ON) | 3.7 | 4.2 | 4.65 | V | TA = -40°C to 140°C | 5 |
| Minimum operating voltage after supply start | V(OFF) | 3.45 | 3.9 | 4.35 | V | | 5 |
| Supply voltage hysteresis | VDD(hys) | 0.2 | 0.3 | 0.5 | V | | 5 |
| Input signal high threshold | VIH(IN) | | 2.2 | 2.4 | V | | 5 |
| Input signal low threshold | VIL(IN) | 1 | 1.2 | | V | | 5 |
| High output voltage | VOH | | 50 | 90 | mV | VDD = 12 V, I(OUTH) = -10 mA | 5 |
| High output voltage | VOH | | 60 | 130 | mV | VDD = 4.5 V, I(OUTH) = -10 mA | 5 |
| Low output voltage | VOL | | 5 | 6.5 | mV | VDD = 12 V, I(OUTL) = 10 mA | 5 |
| Low output voltage | VOL | | 5.5 | 10 | mV | VDD = 4.5 V, I(OUTL) = 10 mA | 5 |
| Output pullup resistance | RO(H) | | 5 | 7.5 | Ω | VDD = 12 V, I(OUTH) = -10 mA | 5 |
| Output pullup resistance | RO(H) | | 5 | 11 | Ω | VDD = 4.5 V, I(OUTH) = -10 mA | 5 |
| Output pulldown resistance | RO(L) | | 0.375 | 0.65 | Ω | VDD = 12 V, I(OUTL) = 10 mA | 5 |
| Output pulldown resistance | RO(L) | | 0.45 | 0.75 | Ω | VDD = 4.5 V, I(OUTL) = 10 mA | 5 |
| Rise time | tr | | 8 | 12 | ns | VDD = 12 V, C(LOAD) = 1.8 nF, OUTH and OUTL tied together | 6 |
| Rise time | tr | | 16 | 22 | ns | VDD = 4.5 V, C(LOAD) = 1.8 nF | 6 |
| Fall time | tf | | 7 | 11 | ns | VDD = 12 V, C(LOAD) = 1.8 nF, OUTH and OUTL tied together | 6 |
| IN+ to output propagation delay | td(1) | 4 | 13 | 23 | ns | VDD = 12 V, 5-V input pulse, C(LOAD) = 1.8 nF, OUTH and OUTL tied together | 6 |
| IN+ to output propagation delay | td(1) | 4 | 15 | 26 | ns | VDD = 4.5 V, 5-V input pulse, C(LOAD) = 1.8 nF, OUTH and OUTL tied together | 6 |
| IN- to output propagation delay | td(2) | 4 | 13 | 23 | ns | VDD = 12 V, C(LOAD) = 1.8 nF, OUTH and OUTL tied together | 6 |
| IN- to output propagation delay | td(2) | 4 | 19 | 30 | ns | VDD = 4.5 V, C(LOAD) = 1.8 nF, OUTH and OUTL tied together | 6 |
| Source peak current | IP(SRC) | | -4 | | A | C(LOAD) = 0.22 µF, ƒS = 1 kHz | 5 |
| Sink peak current | IP(SNK) | | 8 | | A | C(LOAD) = 0.22 µF, ƒS = 1 kHz | 5 |
| Input signal hysteresis | Vhys(IN) | | 1 | | V | | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 217.8 | | °C/W | DBV package, 6 pins | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 97.6 | | °C/W | DBV package, 6 pins | 4 |
| Junction-to-board thermal resistance | RθJB | | 72.2 | | °C/W | DBV package, 6 pins | 4 |
| Junction-to-top characterization parameter | ψJT | | 8.6 | | °C/W | DBV package, 6 pins | 4 |
| Junction-to-board characterization parameter | ψJB | | 71.6 | | °C/W | DBV package, 6 pins | 4 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `UCC27511AQDBVRQ1`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ucc27511aqdbvrq1-etched.step` / `ucc27511aqdbvrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc27511aqdbvrq1.step` / `ucc27511aqdbvrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ucc27511aqdbvrq1.pdf) (31 pp, sha256 `018e22735fedc3d8`, retrieved 2026-11-13, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/ucc27511aqdbvrq1-datasheet.pdf)