component
UCC27425QDRQ1
Public Made by Adomby adom
Texas Instruments Gate Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownUCC27425QDRQ1
Texas Instruments · Gate Drivers · SOIC-8
UCC27425QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENBA | input | Enable input for driver A with internally pulled-up 100 kΩ resistor to VDD for active-high operation; output disabled low when pin is low. |
| 2 | INA | input | Input signal for driver A with logic-compatible threshold and hysteresis; must be tied to VDD or GND if not used and must not be left floating. |
| 3 | GND | power_in | Common ground connected very closely to the source of the power MOSFET which the driver is driving. |
| 4 | INB | input | Input signal for driver B with logic-compatible threshold and hysteresis; must be tied to VDD or GND if not used and must not be left floating. |
| 5 | OUTB | output | Driver output B capable of providing 4 A peak drive current to the gate of a power MOSFET. |
| 6 | VDD | power_in | Supply voltage and power input connection for the device with recommended operating range 4 V to 15 V. |
| 7 | OUTA | output | Driver output A capable of providing 4 A peak drive current to the gate of a power MOSFET. |
| 8 | ENBB | input | Enable input for driver B with internally pulled-up 100 kΩ resistor to VDD for active-high operation; output disabled low when pin is low. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
UCC27425QDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ucc27425qdrq1-etched.step/ucc27425qdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc27425qdrq1.step/ucc27425qdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
d694cae005fb0d3e, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).