component
UCC27424MDGNREP
Public Made by Adomby adom
Texas Instruments Gate Drivers, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownUCC27424MDGNREP
Texas Instruments · Gate Drivers · MSOP-8
UCC27424MDGNREP from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENBA | input | Enable for driver A with logic-compatible threshold and hysteresis, pulled up internally to VDD through a 100-kΩ resistor for active-high operation, and when disabled the output is low regardless of the input state. |
| 2 | INA | input | Input signal of the A driver with logic-compatible threshold and hysteresis; if not used it should be tied to either VDD or GND and must not be left floating. |
| 3 | GND | power_in | Common ground that should be connected very closely to the source of the power MOSFET that the driver is driving. |
| 4 | INB | input | Input signal of the B driver (the datasheet text reads 'A driver', which appears to be a typo) with logic-compatible threshold and hysteresis; if not used it should be tied to either VDD or GND and must not be left floating. |
| 5 | OUTB | output | Driver output B, capable of providing 4-A drive current to the gate of a power MOSFET. |
| 6 | VDD | power_in | Supply voltage and power input connection for the device, with an absolute maximum rating of 16 V referenced to GND. |
| 7 | OUTA | output | Driver output A, capable of providing 4-A drive current to the gate of a power MOSFET. |
| 8 | ENBB | input | Enable for driver B with logic-compatible threshold and hysteresis, pulled up internally to VDD through a 100-kΩ resistor for active-high operation, and when disabled the output is low regardless of the input state. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
UCC27424MDGNREP - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ucc27424mdgnrep-etched.step/ucc27424mdgnrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc27424mdgnrep.step/ucc27424mdgnrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
1298177b01861218, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).