← Commit history

Initial commit: component/ucc21750dwr

Ray ·2d14d29636 ·
2 files changed +242
README.mdadded+53
@@ -0,0 +1,53 @@+# UCC21750DWR++**Texas Instruments** · Isolators - Gate Drivers · SOIC-16-300mil++UCC21750DWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AIN | input | Isolated analog sensing input with voltage range 0.6 V to 4.5 V; parallelize small capacitor to COM for noise immunity; tie to COM if unused. |+| 2 | DESAT | input | Desaturation protection input referenced to COM with detection threshold 8.5 V to 9.8 V; tie to COM if unused. |+| 3 | COM | power_in | Common ground reference for output side, connected to emitter of IGBT or source of SiC-MOSFET. |+| 4 | OUTH | output | Gate driver output pullup with peak source current ±10 A and high-level output voltage 17.5 V at IOUT = -0.2 A. |+| 5 | VDD | power_in | Positive gate drive supply rail with operating range 13 V to 33 V; bypass with >10-μF capacitor to COM. |+| 6 | OUTL | output | Gate driver output pulldown with peak sink current ±10 A and low-level output voltage 60 mV at IOUT = 0.2 A. |+| 7 | CLMPI | input | Internal active miller clamp input connected directly to power transistor gate; threshold voltage 1.5 V to 2.5 V referenced to VEE; leave floating or tie to VEE if unused. |+| 8 | VEE | power_in | Negative gate drive supply rail with operating range -17.5 V to +0.3 V referenced to COM; bypass with >10-μF capacitor to COM. |+| 9 | GND | power_in | Input power supply and logic ground reference; bypass with >1-μF capacitor to VCC. |+| 10 | IN+ | input | Non-inverting gate driver control input with high threshold 1.85 V to 2.31 V (VCC = 3.3 V) and low threshold 0.99 V to 1.52 V; tie to VCC if unused. |+| 11 | IN- | input | Inverting gate driver control input with high threshold 1.85 V to 2.31 V (VCC = 3.3 V) and low threshold 0.99 V to 1.52 V; tie to GND if unused. |+| 12 | RDY | output | Power good output (open drain) indicating power supply status of VCC-GND and VDD-COM; pulled to GND during UVLO condition. |+| 13 | FLT | output | Active-low fault alarm output (open drain) signaling overcurrent or short circuit detection; pulled to GND on fault condition. |+| 14 | RST/EN | input | Reset and enable pin with dual function: (1) enable/shutdown of output by pulling low >1000 ns, (2) reset DESAT fault by pulling low >1000 ns after fault mute time; internally pulled down 50 kΩ. |+| 15 | VCC | power_in | Input power supply with operating range 3.0 V to 5.5 V; bypass with >1-μF capacitor to GND. |+| 16 | APWM | output | Isolated analog PWM output with frequency 380 kHz to 420 kHz; duty cycle 7.5% to 88.5% for AIN voltage 4.5 V to 0.6 V respectively; leave floating if unused. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16-300mil |+| Category | Power Management (PMIC) |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `UCC21750DWR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)+- 3D model files: `ucc21750dwr-etched.step` / `ucc21750dwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc21750dwr.step` / `ucc21750dwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucc21750) (53 pp, sha256 `3c71f631cf74e352`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc21750dwr-datasheet.pdf)
page.jsonadded+189
@@ -0,0 +1,189 @@+{+  "slug": "ucc21750dwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Isolators - Gate Drivers, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "ucc21750dwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ucc21750dwr.kicad_sym",+    "ucc21750dwr.kicad_mod",+    "ucc21750dwr.glb",+    "ucc21750dwr.step",+    "ucc21750dwr.lbr",+    "docs/hero.png",+    "docs/ucc21750dwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "UCC21750DWR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-16-300mil",+    "pin_count": 16,+    "category": "Power Management (PMIC)",+    "subcategory": "Isolators - Gate Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ucc21750",+    "parts": {+      "symbol": "ucc21750dwr.kicad_sym",+      "footprint": "ucc21750dwr.kicad_mod",+      "model_3d": "ucc21750dwr-etched.glb",+      "model_3d_plain": "ucc21750dwr.glb",+      "model_3d_step": "ucc21750dwr-etched.step",+      "model_3d_step_plain": "ucc21750dwr.step",+      "lbr": "ucc21750dwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C5216339"+    },+    "pins": [+      {+        "number": "1",+        "name": "AIN",+        "type": "input",+        "description": "Isolated analog sensing input with voltage range 0.6 V to 4.5 V; parallelize small capacitor to COM for noise immunity; tie to COM if unused."+      },+      {+        "number": "2",+        "name": "DESAT",+        "type": "input",+        "description": "Desaturation protection input referenced to COM with detection threshold 8.5 V to 9.8 V; tie to COM if unused."+      },+      {+        "number": "3",+        "name": "COM",+        "type": "power_in",+        "description": "Common ground reference for output side, connected to emitter of IGBT or source of SiC-MOSFET."+      },+      {+        "number": "4",+        "name": "OUTH",+        "type": "output",+        "description": "Gate driver output pullup with peak source current ±10 A and high-level output voltage 17.5 V at IOUT = -0.2 A."+      },+      {+        "number": "5",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive gate drive supply rail with operating range 13 V to 33 V; bypass with >10-μF capacitor to COM."+      },+      {+        "number": "6",+        "name": "OUTL",+        "type": "output",+        "description": "Gate driver output pulldown with peak sink current ±10 A and low-level output voltage 60 mV at IOUT = 0.2 A."+      },+      {+        "number": "7",+        "name": "CLMPI",+        "type": "input",+        "description": "Internal active miller clamp input connected directly to power transistor gate; threshold voltage 1.5 V to 2.5 V referenced to VEE; leave floating or tie to VEE if unused."+      },+      {+        "number": "8",+        "name": "VEE",+        "type": "power_in",+        "description": "Negative gate drive supply rail with operating range -17.5 V to +0.3 V referenced to COM; bypass with >10-μF capacitor to COM."+      },+      {+        "number": "9",+        "name": "GND",+        "type": "power_in",+        "description": "Input power supply and logic ground reference; bypass with >1-μF capacitor to VCC."+      },+      {+        "number": "10",+        "name": "IN+",+        "type": "input",+        "description": "Non-inverting gate driver control input with high threshold 1.85 V to 2.31 V (VCC = 3.3 V) and low threshold 0.99 V to 1.52 V; tie to VCC if unused."+      },+      {+        "number": "11",+        "name": "IN–",+        "type": "input",+        "description": "Inverting gate driver control input with high threshold 1.85 V to 2.31 V (VCC = 3.3 V) and low threshold 0.99 V to 1.52 V; tie to GND if unused."+      },+      {+        "number": "12",+        "name": "RDY",+        "type": "output",+        "description": "Power good output (open drain) indicating power supply status of VCC-GND and VDD-COM; pulled to GND during UVLO condition."+      },+      {+        "number": "13",+        "name": "FLT",+        "type": "output",+        "description": "Active-low fault alarm output (open drain) signaling overcurrent or short circuit detection; pulled to GND on fault condition."+      },+      {+        "number": "14",+        "name": "RST/EN",+        "type": "input",+        "description": "Reset and enable pin with dual function: (1) enable/shutdown of output by pulling low >1000 ns, (2) reset DESAT fault by pulling low >1000 ns after fault mute time; internally pulled down 50 kΩ."+      },+      {+        "number": "15",+        "name": "VCC",+        "type": "power_in",+        "description": "Input power supply with operating range 3.0 V to 5.5 V; bypass with >1-μF capacitor to GND."+      },+      {+        "number": "16",+        "name": "APWM",+        "type": "output",+        "description": "Isolated analog PWM output with frequency 380 kHz to 420 kHz; duty cycle 7.5% to 88.5% for AIN voltage 4.5 V to 0.6 V respectively; leave floating if unused."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 53,+        "cost_usd": 0.4959,+        "at": "2026-09-22T00:00:07"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ucc21750",+        "pages": 53,+        "sha256": "3c71f631cf74e352",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file