main
Ray Publish 0.1.0 775de3f

UCC21520AQDWRQ1

Texas Instruments · Gate Drive ICs · SOIC-16-300mil

UCC21520AQDWRQ1 from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INA input Input signal for the A channel with a TTL/CMOS compatible threshold; it is pulled low internally if left open and should be tied to ground if unused for better noise immunity.
2 INB input Input signal for the B channel with a TTL/CMOS compatible threshold; it is pulled low internally if left open and should be tied to ground if unused for better noise immunity.
3 VCCI power_in Primary-side supply voltage, locally decoupled to GND with a low ESR/ESL capacitor placed as close to the device as possible.
4 GND power_in Primary-side ground reference to which all primary-side signals are referenced.
5 DISABLE input Disables both driver outputs when asserted high and enables them when set low or left open; it is pulled low internally if open and should be tied to ground if unused, with a ~1 nF low ESR/ESL capacitor close to the pin when driven from a distant microcontroller.
6 DT input Programmable dead-time pin: tying DT to VCCI allows the outputs to overlap, while a 2 kΩ to 500 kΩ resistor from DT to GND sets dead time as DT (ns) = 10 × RDT (kΩ), and leaving the pin floating is not recommended.
7 NC unconnected No internal connection.
8 VCCI power_in Primary-side supply voltage that is internally shorted to pin 3.
9 VSSB power_in Ground reference for the secondary-side driver B channel.
10 OUTB output Output of driver B, which connects to the gate of the B-channel FET or IGBT.
11 VDDB power_in Secondary-side power for driver B, locally decoupled to VSSB with a low ESR/ESL capacitor placed as close as possible to the pin.
12 NC unconnected No internal connection.
13 NC unconnected No internal connection.
14 VSSA power_in Ground reference for the secondary-side driver A channel.
15 OUTA output Output of driver A, which connects to the gate of the A-channel FET or IGBT.
16 VDDA power_in Secondary-side power for driver A, locally decoupled to VSSA with a low ESR/ESL capacitor placed as close as possible to the pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Power Supply Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input bias pin supply voltage VCCI to GND VCCI -0.3 20 V 4
Driver bias supply VDDA-VSSA, VDDB-VSSB VDDA-VSSA, VDDB-VSSB -0.3 30 V 4
Output signal voltage OUTA to VSSA, OUTB to VSSB; max = VDDA/B + 0.3 V -0.3 V 4
Output signal voltage OUTA to VSSA, OUTB to VSSB, transient; max = VDDA/B + 0.3 V -2 V Transient for 200 ns 4
Input signal voltage INA, INB, DIS, DT to GND; max = VCCI + 0.3 V -0.3 V 4
Input signal voltage INA, INB; max = VCCI + 0.3 V -5 V Transient for 50ns 4
Junction temperature TJ -40 150 ℃ 4
Storage temperature Tstg -65 150 ℃ 4
Input supply voltage VCCI 3 18 V 4
Driver output bias supply, UCC21520A 5-V UVLO version VDDA, VDDB 6.5 25 V 4
Junction temperature (recommended operating) TJ -40 150 ℃ 4
VCCI quiescent current IVCCI 1.4 2 mA VINA = 0 V, VINB = 0 V 7
VDDA and VDDB quiescent current IVDDA, IVDDB 1 2.5 mA VINA = 0 V, VINB = 0 V 7
VCCI operating current (f = 500 kHz) IVCCI 3 3.5 mA current per channel 7
VDDA and VDDB operating current (f = 500 kHz) IVDDA, IVDDB 2.5 4.2 mA current per channel, COUT = 100 pF 7
VCCI UVLO rising threshold VVCCI_ON 2.55 2.7 2.85 V 7
VCCI UVLO falling threshold VVCCI_OFF 2.35 2.5 2.65 V 7
VDD UVLO rising threshold (5-V UVLO) VVDDA_ON, VVDDB_ON 5.7 6 6.3 V 7
VDD UVLO falling threshold (5-V UVLO) VVDDA_OFF, VVDDB_OFF 5.4 5.7 6 V 7
Input high threshold voltage VINAH, VINBH, VENH 1.2 1.8 2 V 7
Input low threshold voltage VINAL, VINBL, VENL 0.8 1 1.2 V 7
Negative transient voltage on INA, INB (bench test only) VINA, VINB -5 V Negative transient, ref to GND, 100 ns pulse 7
Output rise time, 20% to 80% tRISE 6 16 ns COUT = 1.8 nF 8
Output fall time, 90% to 10% tFALL 7 12 ns COUT = 1.8 nF 8
Minimum pulse width tPWmin 20 ns Output off for less than minimum, COUT = 0pF 8
Propagation delay from INx to OUTx falling edges tPDHL 26 33 45 ns 8
Propagation delay from INx to OUTx rising edges tPDLH 26 33 45 ns 8
Pulse width distortion /tPDLH, tPDHL/ tPWD 6 ns 8
Propagation Delay Matching for Dual Channel Driver (TJ = -40°C to -10°C) tDM 6.5 ns Input Pulse Width = 100ns, 500kHz, TJ = -40°C to -10°C 8
Propagation Delay Matching for Dual Channel Driver (TJ = -10°C to +150°C) tDM 5 ns Input Pulse Width = 100ns, 500kHz, TJ = -10°C to +150°C 8
VDDA, VDDB power-up delay time: UVLO rise to OUTA, OUTB tVDD+ to OUT 10 μs INA or INB tied to VCCI 8
High-level common-mode transient immunity /CMH/ 125 V/ns Slew rate of GND versus VSSA/B, INA and INB both are tied to GND or VCCI; VCM = 1500V 8
Low-level common-mode transient immunity /CML/ 125 V/ns Slew rate of GND versus VSSA/B, INA and INB both are tied to GND or VCCI; VCM = 1500V 8
Dead time DT 80 100 120 ns RDT = 10 kΩ 8
Dead time DT 160 200 240 ns RDT = 20 kΩ 8
Dead time DT 400 500 600 ns RDT = 50 kΩ 8
Junction-to-ambient thermal resistance (DW-16 SOIC) RθJA 69.8 °C/W 4
Junction-to-case (top) thermal resistance (DW-16 SOIC) RθJC(top) 33.1 °C/W 4
Junction-to-board thermal resistance (DW-16 SOIC) RθJB 36.9 °C/W 4
Junction-to-top (center) characterization parameter (DW-16 SOIC) ΨJT 22.2 °C/W 4
Junction-to-board characterization parameter (DW-16 SOIC) ΨJB 36 °C/W 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper • Increasing the PCB copper connecting to VDDA, VDDB, VSSA and VSSB pins is recommended, with priority 38

CAD (KiCad official)

  • Symbol: UCC21520AQDWRQ1
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: ucc21520aqdwrq1-etched.step / ucc21520aqdwrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc21520aqdwrq1.step / ucc21520aqdwrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (52 pp, sha256 f3a37cba5f7611c6, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF