Generated by kicad-footprint-generator · KiCad file format 20260206
UCC12050DVER
Texas Instruments · DC-DC Converters · SOIC-16-300mil
UCC12050DVER from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable pin: forcing EN low disables the device, and it must be pulled high to enable normal device functionality. |
| 2 | GNDP | power_in | Power ground return connection for VINP (primary side). |
| 3 | VINP | power_in | Primary-side input supply voltage pin; a 10-µF ceramic capacitor to GNDP on pin 2, placed close to the device pins, is required. |
| 4 | SYNC | input | Synchronous clock input: apply a clock to synchronize multiple devices, or connect to GNDP for standalone operation with the internal oscillator; if left open, keep it separated from switching noise to avoid false clock coupling. |
| 5 | SYNC_OK | output | Active-low, open-drain diagnostic output that is asserted LOW when there is no external SYNC clock or the detected clock is outside the operating range, and is high-impedance when a clock is applied on SYNC. |
| 6 | NC | unconnected | Internally connected to pins 7 and 8 with no other electrical connection; belongs to the primary-side voltage domain and should be connected to GNDP on the printed circuit board. |
| 7 | NC | unconnected | Internally connected to pins 6 and 8 with no other electrical connection; belongs to the primary-side voltage domain and should be connected to GNDP on the printed circuit board. |
| 8 | NC | unconnected | Internally connected to pins 6 and 7 with no other electrical connection; belongs to the primary-side voltage domain and should be connected to GNDP on the printed circuit board. |
| 9 | GNDS | power_in | Secondary-side ground connection to the GNDS plane on the printed circuit board; it must not be the only ground connection for VISO, and pin 15 must be connected to circuit ground. |
| 10 | NC | unconnected | No internal connection; belongs to the isolated voltage domain and should be connected to GNDS on the printed circuit board. |
| 11 | NC | unconnected | No internal connection; belongs to the isolated voltage domain and should be connected to GNDS on the printed circuit board. |
| 12 | NC | unconnected | No internal connection; belongs to the isolated voltage domain and should be connected to GNDS on the printed circuit board. |
| 13 | SEL | input | VISO selection pin: shorted to VISO sets 5.0 V, 100 kΩ to VISO sets 5.4 V, shorted to GNDS sets 3.3 V, and 100 kΩ to GNDS sets 3.7 V; it is monitored only during power-up within the first 1 ms. |
| 14 | VISO | power_out | Isolated supply voltage output; a 10-µF ceramic capacitor to GNDS on pin 15, placed close to the device pins, is required. |
| 15 | GNDS | power_in | Secondary-side ground return connection for VISO; the VISO bypass capacitor connects between VISO and this pin. |
| 16 | GNDS | power_in | Secondary-side ground connection to the GNDS plane on the printed circuit board; it must not be the only ground connection for VISO, and pin 15 must be connected to circuit ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Power Management ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VISO output voltage, SEL shorted to VISO (5.0 V output), IISO = 55 mA | VISO | 4.7 | 5 | 5.3 | V | SEL shorted to VISO (5.0 V output); IISO = 55 mA | 7 |
| VISO output voltage, SEL 100 kΩ to VISO (5.4 V output), IISO = 45 mA | VISO | 5.1 | 5.4 | 5.7 | V | SEL 100kΩ to VISO (5.4 V output); IISO = 45 mA | 7 |
| VISO output voltage, SEL shorted to GNDS (3.3 V output), IISO = 100 mA | VISO | 3.1 | 3.3 | 3.5 | V | SEL shorted to GNDS (3.3 V output); IISO = 100 mA | 7 |
| VISO output voltage, SEL 100 kΩ to GNDS (3.7 V output), IISO = 90 mA | VISO | 3.5 | 3.7 | 3.9 | V | SEL 100kΩ to GNDS (3.7 V output); IISO = 90 mA | 7 |
| Switching frequency, DC/DC converter clock, internal clock mode | fSW_INT | 7.2 | 8 | 8.8 | MHz | Internal clock mode | 8 |
| Enable pin input current | IEN | 5 | 10 | uA | VEN = 5.0 V | 7 | |
| SYNC pin input current | ISYNC | 0.02 | 1 | uA | VSYNC = 5.0 V | 7 | |
| VINP to GNDP absolute maximum | -0.3 | 6 | V | 4 | |||
| VISO to GNDS absolute maximum | -0.3 | 6 | V | 4 | |||
| EN, SYNC, SYNC_OK to GNDP absolute maximum | -0.3 | V | 4 | ||||
| SEL to GNDS absolute maximum | -0.3 | V | 4 | ||||
| Operating junction temperature range | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| VISO output power at Ta = 25°C, absolute maximum | POUT_MAX | 675 | mW | Ta = 25°C | 4 | ||
| VINP primary side supply voltage | VINP | 4.5 | 5 | 5.5 | V | 4 | |
| EN pin input voltage | VEN | 0 | 5.5 | V | 4 | ||
| SYNC pin input voltage | VSYNC | 0 | 5.5 | V | 4 | ||
| SYNC_OK open-drain pin voltage | VSYNC-OK | 0 | 5.5 | V | 4 | ||
| Isolated power supply voltage | VISO | 0 | 5.7 | V | 4 | ||
| SEL input voltage | VSEL | 0 | 5.7 | V | 4 | ||
| External DC/DC converter synchronization signal frequency | fSYNC | 14.4 | 16 | 17.6 | MHz | 4 | |
| Ambient temperature | Ta | -40 | 125 | °C | 4 | ||
| Junction temperature, recommended | TJ | -40 | 150 | °C | 4 | ||
| VISO output power at Ta = 25°C, recommended (single printed value, column not recoverable) | PVISO | 500 | mW | Ta = 25°C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 63.8 | °C/W | JESD 51-7, 4-layer JEDEC board | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 21.4 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 38.5 | °C/W | 4 | |||
| Safety input current | IS | 356 | mA | RθJA = 63.8°C/W, VI = 5.5 V, TJ = 150°C, TA = 25°C | 6 | ||
| Safety input current | IS | 435 | mA | RθJA = 63.8°C/W, VI = 4.5 V, TJ = 150°C, TA = 25°C | 6 | ||
| Safety input power | PS | 1960 | mW | RθJA = 63.8°C/W, TJ = 150°C, TA = 25°C | 6 | ||
| VINP quiescent current, disabled (single printed value, column not recoverable) | IVINQ | 100 | uA | EN=LOW | 7 | ||
| VINP operating current, no load (single printed value, column not recoverable) | IVINO | 50 | mA | No load; EN=HI; SEL shorted to VISO (5.0 V output) | 7 | ||
| VINP operating current, no load (single printed value, column not recoverable) | IVINO | 45 | mA | No load; EN=HI; SEL 100kΩ to VISO (5.4 V output) | 7 | ||
| VINP operating current, no load (single printed value, column not recoverable) | IVINO | 90 | mA | No load; EN=HI; SEL shorted to GNDS (3.3 V output) | 7 | ||
| VINP operating current, no load (single printed value, column not recoverable) | IVINO | 80 | mA | No load; EN=HI; SEL 100kΩ to GNDS (3.7 V output) | 7 | ||
| DC current from VINP supply under short circuit on VISO (single printed value, column not recoverable) | IVIN_SC | 245 | mA | VISO short to GNDS | 7 | ||
| VINP under-voltage lockout rising threshold (single printed value, column not recoverable) | VUVPR | 4.2 | V | 7 | |||
| VINP under-voltage lockout falling threshold (single printed value, column not recoverable) | VUVPF | 3.7 | V | 7 | |||
| VINP under-voltage lockout hysteresis (single printed value, column not recoverable) | VUVPH | 0.5 | V | 7 | |||
| Input voltage threshold, logic HIGH (single printed value, column not recoverable) | VIR | 2.2 | V | Rising edge | 7 | ||
| Input voltage threshold, logic LOW (single printed value, column not recoverable) | VIF | 0.8 | V | Falling edge | 7 | ||
| SYNC_OK output low voltage (single printed value, column not recoverable) | VOL | 0.15 | V | ISYNC_OK = -2 mA | 7 | ||
| SYNC_OK pin leakage current (single printed value, column not recoverable) | ILKG_SYNC_OK | 1 | uA | VSYNC_OK = 5.0 V | 7 | ||
| Voltage ripple on isolated supply output, pk-pk (single printed value, column not recoverable) | VISO(RIP) | 50 | mV | 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL shorted to VISO (5.0 V output); IISO = 100 mA | 7 | ||
| VISO DC line regulation (single printed value, column not recoverable) | VISO(LINE) | 1 | % | SEL shorted to VISO (5.0 V output); IISO = 50 mA, VINP = 4.5 V to 5.5 V | 7 | ||
| VISO DC load regulation (single printed value, column not recoverable) | VISO(LOAD) | 1.5 | % | SEL shorted to VISO (5.0 V output); IISO = 0 to 100 mA | 8 | ||
| Efficiency at maximum recommended load (single printed value, column not recoverable) | EFF | 60 | % | SEL shorted to VISO (5.0 V output); IISO = 100 mA | 8 | ||
| Efficiency at maximum recommended load (single printed value, column not recoverable) | EFF | 50 | % | SEL shorted to GNDS (3.3 V output); IISO = 145 mA | 8 | ||
| Efficiency at maximum recommended load (single printed value, column not recoverable) | EFF | 53 | % | SEL 100kΩ to GNDS (3.7 V output); IISO = 130 mA | 8 | ||
| VISO rise time, 10%-90% (single printed value, column not recoverable) | tRISE | 750 | µs | EN = change from LO to HI, SEL shorted to VISO (5.0 V output); IISO = 1 mA | 8 | ||
| VISO rise time, 10%-90% (single printed value, column not recoverable) | tRISE | 300 | µs | EN = change from LO to HI, SEL 100kΩ to GNDS (3.3 V output); IISO = 1 mA | 8 | ||
| Thermal shutdown threshold (single printed value, column not recoverable) | TSDTHR | 165 | °C | Junction temperature, rising | 8 | ||
| Thermal shutdown hysteresis (single printed value, column not recoverable) | TSDHYST | 27 | °C | Junction temperature, falling | 8 | ||
| Static common-mode transient immunity (single printed value, column not recoverable) | CMTI | 100 | V/ns | Slew rate of GNDP versus GNDS, VCM = 1000 V | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | respective GND pins. Ensure that enough copper (preferably a connection to the ground plane) is present on | 24 |
CAD (KiCad official)
- Symbol:
UCC12050DVER - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
ucc12050dver-etched.step/ucc12050dver-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc12050dver.step/ucc12050dver.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
faf6bfed5030e5ef, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).