← Commit history
ucc12040dver: specified limits as data (metadata.characteristics, 54 rows from the datasheet)
2 files changed
+716
README.md+61@@ -34,6 +34,67 @@ UCC12040DVER from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descrip | Category | Power Management (PMIC) | | Pins | 16 | +## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| VINP to GNDP | VINP | -0.3 | | 6 | V | over operating free-air temperature range (unless otherwise noted) | 4 |+| EN, SYNC, SYNC_OK to GNDP | | -0.3 | | | V | over operating free-air temperature range (unless otherwise noted) | 4 |+| VISO to GNDS | VISO | -0.3 | | 6 | V | over operating free-air temperature range (unless otherwise noted) | 4 |+| SEL to GNDS | | -0.3 | | | V | over operating free-air temperature range (unless otherwise noted) | 4 |+| VISO output power at Ta = 25°C | POUT_MAX | | | 675 | mW | Ta = 25°C | 4 |+| Operating junction temperature range | TJ | -40 | | 150 | °C | | 4 |+| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |+| VINP Primary side supply voltage | VINP | 4.5 | 5 | 5.5 | V | over operating free-air temperature range (unless otherwise noted) | 4 |+| EN pin input voltage | VEN | 0 | | 5.5 | V | | 4 |+| SYNC pin input voltage | VSYNC | 0 | | 5.5 | V | | 4 |+| SYNC_OK pen drain pin voltage | VSYNC-OK | 0 | | 5.5 | V | | 4 |+| Isolated power supply voltage | VISO | 0 | | 5.7 | V | | 4 |+| Input voltage | VSEL | 0 | | 5.7 | V | | 4 |+| External DC/DC converter synchronization signal frequency | fSYNC | 14.4 | 16 | 17.6 | MHz | | 4 |+| VISO output power at Ta = 25°C | PVISO | | | 500 | mW | Ta = 25°C | 4 |+| Ambient temperature | Ta | -40 | | 125 | °C | | 4 |+| Junction temperature | TJ | -40 | | 150 | °C | | 4 |+| VINP quiescent current, disabled | IVINQ | | | 100 | uA | EN=LOW | 7 |+| VINP operating current, no load | IVINO | | | 50 | mA | EN=HI; SEL shorted to VISO (5.0V output) | 7 |+| VINP operating current, no load | IVINO | | | 45 | mA | EN=HI; SEL 100kΩ to VISO (5.4V output) | 7 |+| VINP operating current, no load | IVINO | | | 90 | mA | EN=HI; SEL shorted to GNDS (3.3V output) | 7 |+| VINP operating current, no load | IVINO | | | 80 | mA | EN=HI; SEL 100kΩ to GNDS (3.7V output) | 7 |+| DC current from VINP supply under short circuit on VISO | IVIN_SC | | | 245 | mA | VISO short to GNDS | 7 |+| Enable Pin Input Current | IEN | | 5 | 10 | uA | VEN = 5.0 V | 7 |+| SYNC Pin Input Current | ISYNC | | 0.02 | 1 | uA | VSYNC = 5.0 V | 7 |+| SYNC_OK output low voltage | VOL | | | 0.15 | V | ISYNC_OK = - 2 mA | 7 |+| SYNC_OK pin leakage current | ILKG_SYNC_OK | | | 1 | uA | VSYNC_OK = 5.0 V | 7 |+| Isolated supply output voltage | VISO | 4.7 | 5 | 5.3 | V | SEL shorted to VISO (5.0V output); IISO = 55 mA (2) | 7 |+| Isolated supply output voltage | VISO | 5.1 | 5.4 | 5.7 | V | SEL 100kΩ to VISO (5.4 V output); IISO = 45 mA (2) | 7 |+| Isolated supply output voltage | VISO | 3.1 | 3.3 | 3.5 | V | SEL shorted to GNDS (3.3V output); IISO = 100 mA (2) | 7 |+| Isolated supply output voltage | VISO | 3.5 | 3.7 | 3.9 | V | SEL 100kΩ to GNDS (3.7 V output); IISO = 90 mA (2) | 7 |+| Voltage ripple on isolated supply output (pk-pk) | VISO(RIP) | | | 50 | mV | 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL shorted to VISO (5.0V output); IISO = 100 mA | 7 |+| Rise time, 10% - 90% | tRISE | | | 750 | µs | EN = change from LO to HI, SEL shorted to VISO (5.0V output); IISO = 1 mA | 8 |+| Rise time, 10% - 90% | tRISE | | | 300 | µs | EN = change from LO to HI, SEL 100kΩ to GNDS (3.3V output); IISO = 1 mA | 8 |+| DC/DC Converter Clock | fSW_INT | 7.2 | 8 | 8.8 | MHz | Internal clock mode | 8 |+| VINP under-voltage lockout rising threshold | VUVPR | | 4.2 | | V | | 7 |+| VINP under-voltage lockout falling threshold | VUVPF | | 3.7 | | V | | 7 |+| VINP under-voltage lockout hysteresis | VUVPH | | 0.5 | | V | | 7 |+| Input voltage threshold, logic HIGH | VIR | | 2.2 | | V | Rising edge | 7 |+| Input voltage threshold, logic LOW | VIF | | 0.8 | | V | Falling edge | 7 |+| Isolated voltage ripple load regulation: VISO DC line regulation | VISO(LINE) | | 1 | | % | SEL shorted to VISO (5.0 V output); IISO = 50 mA, VINP = 4.5 V to 5.5 V | 7 |+| VISO DC line regulation | VISO(LINE) | | 1 | | % | SEL shorted to GNDS (3.3 V output); IISO = 75 mA, VINP = 4.5 V to 5.5 V | 7 |+| VISO DC load regulation | VISO(LOAD) | | 1.5 | | % | SEL shorted to VISO (5.0 V output); IISO = 0 to 100 mA | 8 |+| Efficiency at maximum recommended load | EFF | | 60 | | % | SEL shorted to VISO (5.0 V output); IISO = 100 mA | 8 |+| Efficiency at maximum recommended load | EFF | | 50 | | % | SEL shorted to GNDS (3.3V output); IISO = 145 mA | 8 |+| Efficiency at maximum recommended load | EFF | | 53 | | % | SEL 100kΩ to GNDS (3.7V output); IISO = 130 mA | 8 |+| Thermal shutdown threshold | TSDTHR | | 165 | | °C | Junction Temperature, Rising | 8 |+| Thermal shutdown hysteresis | TSDHYST | | 27 | | °C | Junction Temperature, Falling | 8 |+| Static common-mode transient immunity | CMTI | | 100 | | V/ns | Slew Rate of GNDP versus GNDS, VCM = 1000 V | 8 |+| Junction-to-ambient thermal resistance | RθJA | | 63.8 | | °C/W | | 4 |+| Junction-to-case (top) thermal resistance | RθJC(top) | | 21.4 | | °C/W | | 4 |+| Junction-to-board thermal resistance | RθJB | | 38.5 | | °C/W | | 4 |+| Junction-to-top characterization parameter | ψJT | | 10.2 | | °C/W | | 4 |+| Junction-to-board characterization parameter | ψJB | | 37.2 | | °C/W | | 4 |+ ## CAD (KiCad official) - Symbol: `UCC12040DVER`
page.json+655@@ -226,6 +226,661 @@ "Package": "SOIC-16-300mil", "Category": "Power Management (PMIC)", "Pins": "16"+ },+ "characteristics": {+ "version": 1,+ "source": "datasheet",+ "datasheet_sha256": "db9973072db483b2",+ "rows": [+ {+ "name": "VINP to GNDP",+ "symbol": "VINP",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": 6,+ "conditions": "over operating free-air temperature range (unless otherwise noted)",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "EN, SYNC, SYNC_OK to GNDP",+ "symbol": "",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": null,+ "conditions": "over operating free-air temperature range (unless otherwise noted)",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "VISO to GNDS",+ "symbol": "VISO",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": 6,+ "conditions": "over operating free-air temperature range (unless otherwise noted)",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "SEL to GNDS",+ "symbol": "",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": null,+ "conditions": "over operating free-air temperature range (unless otherwise noted)",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "VISO output power at Ta = 25°C",+ "symbol": "POUT_MAX",+ "kind": "absolute_maximum",+ "unit": "mW",+ "min": null,+ "typ": null,+ "max": 675,+ "conditions": "Ta = 25°C",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Operating junction temperature range",+ "symbol": "TJ",+ "kind": "absolute_maximum",+ "unit": "°C",+ "min": -40,+ "typ": null,+ "max": 150,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Storage temperature",+ "symbol": "Tstg",+ "kind": "absolute_maximum",+ "unit": "°C",+ "min": -65,+ "typ": null,+ "max": 150,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "VINP Primary side supply voltage",+ "symbol": "VINP",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 4.5,+ "typ": 5,+ "max": 5.5,+ "conditions": "over operating free-air temperature range (unless otherwise noted)",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "EN pin input voltage",+ "symbol": "VEN",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 0,+ "typ": null,+ "max": 5.5,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "SYNC pin input voltage",+ "symbol": "VSYNC",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 0,+ "typ": null,+ "max": 5.5,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "SYNC_OK pen drain pin voltage",+ "symbol": "VSYNC-OK",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 0,+ "typ": null,+ "max": 5.5,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Isolated power supply voltage",+ "symbol": "VISO",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 0,+ "typ": null,+ "max": 5.7,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Input voltage",+ "symbol": "VSEL",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 0,+ "typ": null,+ "max": 5.7,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "External DC/DC converter synchronization signal frequency",+ "symbol": "fSYNC",+ "kind": "recommended_operating",+ "unit": "MHz",+ "min": 14.4,+ "typ": 16,+ "max": 17.6,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "VISO output power at Ta = 25°C",+ "symbol": "PVISO",+ "kind": "recommended_operating",+ "unit": "mW",+ "min": null,+ "typ": null,+ "max": 500,+ "conditions": "Ta = 25°C",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Ambient temperature",+ "symbol": "Ta",+ "kind": "recommended_operating",+ "unit": "°C",+ "min": -40,+ "typ": null,+ "max": 125,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction temperature",+ "symbol": "TJ",+ "kind": "recommended_operating",+ "unit": "°C",+ "min": -40,+ "typ": null,+ "max": 150,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "VINP quiescent current, disabled",+ "symbol": "IVINQ",+ "kind": "electrical",+ "unit": "uA",+ "min": null,+ "typ": null,+ "max": 100,+ "conditions": "EN=LOW",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "VINP operating current, no load",+ "symbol": "IVINO",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 50,+ "conditions": "EN=HI; SEL shorted to VISO (5.0V output)",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "VINP operating current, no load",+ "symbol": "IVINO",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 45,+ "conditions": "EN=HI; SEL 100kΩ to VISO (5.4V output)",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "VINP operating current, no load",+ "symbol": "IVINO",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 90,+ "conditions": "EN=HI; SEL shorted to GNDS (3.3V output)",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "VINP operating current, no load",+ "symbol": "IVINO",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 80,+ "conditions": "EN=HI; SEL 100kΩ to GNDS (3.7V output)",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "DC current from VINP supply under short circuit on VISO",+ "symbol": "IVIN_SC",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 245,+ "conditions": "VISO short to GNDS",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "Enable Pin Input Current",+ "symbol": "IEN",+ "kind": "electrical",+ "unit": "uA",+ "min": null,+ "typ": 5,+ "max": 10,+ "conditions": "VEN = 5.0 V",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "SYNC Pin Input Current",+ "symbol": "ISYNC",+ "kind": "electrical",+ "unit": "uA",+ "min": null,+ "typ": 0.02,+ "max": 1,+ "conditions": "VSYNC = 5.0 V",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "SYNC_OK output low voltage",+ "symbol": "VOL",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": 0.15,+ "conditions": "ISYNC_OK = - 2 mA",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "SYNC_OK pin leakage current",+ "symbol": "ILKG_SYNC_OK",+ "kind": "electrical",+ "unit": "uA",+ "min": null,+ "typ": null,+ "max": 1,+ "conditions": "VSYNC_OK = 5.0 V",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "Isolated supply output voltage",+ "symbol": "VISO",+ "kind": "electrical",+ "unit": "V",+ "min": 4.7,+ "typ": 5,+ "max": 5.3,+ "conditions": "SEL shorted to VISO (5.0V output); IISO = 55 mA (2)",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "Isolated supply output voltage",+ "symbol": "VISO",+ "kind": "electrical",+ "unit": "V",+ "min": 5.1,+ "typ": 5.4,+ "max": 5.7,+ "conditions": "SEL 100kΩ to VISO (5.4 V output); IISO = 45 mA (2)",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "Isolated supply output voltage",+ "symbol": "VISO",+ "kind": "electrical",+ "unit": "V",+ "min": 3.1,+ "typ": 3.3,+ "max": 3.5,+ "conditions": "SEL shorted to GNDS (3.3V output); IISO = 100 mA (2)",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "Isolated supply output voltage",+ "symbol": "VISO",+ "kind": "electrical",+ "unit": "V",+ "min": 3.5,+ "typ": 3.7,+ "max": 3.9,+ "conditions": "SEL 100kΩ to GNDS (3.7 V output); IISO = 90 mA (2)",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "Voltage ripple on isolated supply output (pk-pk)",+ "symbol": "VISO(RIP)",+ "kind": "electrical",+ "unit": "mV",+ "min": null,+ "typ": null,+ "max": 50,+ "conditions": "20-MHz bandwidth, CLOAD = 10 uF || 0.1 uF, SEL shorted to VISO (5.0V output); IISO = 100 mA",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "Rise time, 10% - 90%",+ "symbol": "tRISE",+ "kind": "timing",+ "unit": "µs",+ "min": null,+ "typ": null,+ "max": 750,+ "conditions": "EN = change from LO to HI, SEL shorted to VISO (5.0V output); IISO = 1 mA",+ "source_page": 8,+ "source": "datasheet"+ },+ {+ "name": "Rise time, 10% - 90%",+ "symbol": "tRISE",+ "kind": "timing",+ "unit": "µs",+ "min": null,+ "typ": null,+ "max": 300,+ "conditions": "EN = change from LO to HI, SEL 100kΩ to GNDS (3.3V output); IISO = 1 mA",+ "source_page": 8,+ "source": "datasheet"+ },+ {+ "name": "DC/DC Converter Clock",+ "symbol": "fSW_INT",+ "kind": "electrical",+ "unit": "MHz",+ "min": 7.2,+ "typ": 8,+ "max": 8.8,+ "conditions": "Internal clock mode",+ "source_page": 8,+ "source": "datasheet"+ },+ {+ "name": "VINP under-voltage lockout rising threshold",+ "symbol": "VUVPR",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": 4.2,+ "max": null,+ "conditions": "",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "VINP under-voltage lockout falling threshold",+ "symbol": "VUVPF",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": 3.7,+ "max": null,+ "conditions": "",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "VINP under-voltage lockout hysteresis",+ "symbol": "VUVPH",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": 0.5,+ "max": null,+ "conditions": "",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "Input voltage threshold, logic HIGH",+ "symbol": "VIR",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": 2.2,+ "max": null,+ "conditions": "Rising edge",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "Input voltage threshold, logic LOW",+ "symbol": "VIF",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": 0.8,+ "max": null,+ "conditions": "Falling edge",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "Isolated voltage ripple load regulation: VISO DC line regulation",+ "symbol": "VISO(LINE)",+ "kind": "electrical",+ "unit": "%",+ "min": null,+ "typ": 1,+ "max": null,+ "conditions": "SEL shorted to VISO (5.0 V output); IISO = 50 mA, VINP = 4.5 V to 5.5 V",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "VISO DC line regulation",+ "symbol": "VISO(LINE)",+ "kind": "electrical",+ "unit": "%",+ "min": null,+ "typ": 1,+ "max": null,+ "conditions": "SEL shorted to GNDS (3.3 V output); IISO = 75 mA, VINP = 4.5 V to 5.5 V",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "VISO DC load regulation",+ "symbol": "VISO(LOAD)",+ "kind": "electrical",+ "unit": "%",+ "min": null,+ "typ": 1.5,+ "max": null,+ "conditions": "SEL shorted to VISO (5.0 V output); IISO = 0 to 100 mA",+ "source_page": 8,+ "source": "datasheet"+ },+ {+ "name": "Efficiency at maximum recommended load",+ "symbol": "EFF",+ "kind": "electrical",+ "unit": "%",+ "min": null,+ "typ": 60,+ "max": null,+ "conditions": "SEL shorted to VISO (5.0 V output); IISO = 100 mA",+ "source_page": 8,+ "source": "datasheet"+ },+ {+ "name": "Efficiency at maximum recommended load",+ "symbol": "EFF",+ "kind": "electrical",+ "unit": "%",+ "min": null,+ "typ": 50,+ "max": null,+ "conditions": "SEL shorted to GNDS (3.3V output); IISO = 145 mA",+ "source_page": 8,+ "source": "datasheet"+ },+ {+ "name": "Efficiency at maximum recommended load",+ "symbol": "EFF",+ "kind": "electrical",+ "unit": "%",+ "min": null,+ "typ": 53,+ "max": null,+ "conditions": "SEL 100kΩ to GNDS (3.7V output); IISO = 130 mA",+ "source_page": 8,+ "source": "datasheet"+ },+ {+ "name": "Thermal shutdown threshold",+ "symbol": "TSDTHR",+ "kind": "thermal",+ "unit": "°C",+ "min": null,+ "typ": 165,+ "max": null,+ "conditions": "Junction Temperature, Rising",+ "source_page": 8,+ "source": "datasheet"+ },+ {+ "name": "Thermal shutdown hysteresis",+ "symbol": "TSDHYST",+ "kind": "thermal",+ "unit": "°C",+ "min": null,+ "typ": 27,+ "max": null,+ "conditions": "Junction Temperature, Falling",+ "source_page": 8,+ "source": "datasheet"+ },+ {+ "name": "Static common-mode transient immunity",+ "symbol": "CMTI",+ "kind": "electrical",+ "unit": "V/ns",+ "min": null,+ "typ": 100,+ "max": null,+ "conditions": "Slew Rate of GNDP versus GNDS, VCM = 1000 V",+ "source_page": 8,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-ambient thermal resistance",+ "symbol": "RθJA",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 63.8,+ "max": null,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-case (top) thermal resistance",+ "symbol": "RθJC(top)",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 21.4,+ "max": null,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-board thermal resistance",+ "symbol": "RθJB",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 38.5,+ "max": null,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-top characterization parameter",+ "symbol": "ψJT",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 10.2,+ "max": null,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-board characterization parameter",+ "symbol": "ψJB",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 37.2,+ "max": null,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ }+ ] } }, "variants": [],