← Commit history

Initial commit: component/ucc12040dver

Ray ·3f064323b6 ·
2 files changed +256
README.mdadded+52
@@ -0,0 +1,52 @@+# UCC12040DVER++**Texas Instruments** · DC-DC Converters · SOIC-16-300mil++UCC12040DVER from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | EN | input | Enable pin; forcing EN low disables the device, pull high to enable normal device functionality. |+| 2 | GNDP | power_in | Power ground return connection for VINP. |+| 3 | VINP | power_in | Primary side input supply voltage pin; 4.5 V to 5.5 V operating range with 10-μF ceramic capacitor to GNDP required. |+| 4 | SYNC | input | Synchronous clock input pin; external clock range 14.4 MHz to 17.6 MHz or connect to GNDP for standalone internal oscillator operation. |+| 5 | SYNC_OK | output | Active-low open-drain diagnostic output asserted LOW when external SYNC clock is absent or outside operating range. |+| 6 | NC | unconnected | Internally connected pin for primary-side voltage domain; connect to GNDP on printed circuit board. |+| 7 | NC | unconnected | Internally connected pin for primary-side voltage domain; connect to GNDP on printed circuit board. |+| 8 | NC | unconnected | Internally connected pin for primary-side voltage domain; connect to GNDP on printed circuit board. |+| 9 | GNDS | power_in | Connect to GNDS plane on printed circuit board; ensure pin 15 is connected to circuit ground and do not use as only ground connection for VISO. |+| 10 | NC | unconnected | No internal connection pin for isolated voltage domain; connect to GNDS on printed circuit board. |+| 11 | NC | unconnected | No internal connection pin for isolated voltage domain; connect to GNDS on printed circuit board. |+| 12 | NC | unconnected | No internal connection pin for isolated voltage domain; connect to GNDS on printed circuit board. |+| 13 | SEL | input | VISO selection pin determining output voltage: 5.0 V (shorted to VISO), 5.4 V (100 kΩ to VISO), 3.3 V (shorted to GNDS), or 3.7 V (100 kΩ to GNDS). |+| 14 | VISO | power_out | Isolated supply voltage output pin (3.3 V to 5.4 V selectable) with 10-μF ceramic capacitor to GNDS on pin 15 required. |+| 15 | GNDS | power_in | Secondary side ground return connection for VISO; connect bypass capacitor from VISO to this pin. |+| 16 | GNDS | power_in | Connect to GNDS plane on printed circuit board; ensure pin 15 is connected to circuit ground and do not use as only ground connection for VISO. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16-300mil |+| Category | Power Management (PMIC) |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `UCC12040DVER`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)+- 3D model files: `ucc12040dver-etched.step` / `ucc12040dver-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc12040dver.step` / `ucc12040dver.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucc12040) (36 pp, sha256 `db9973072db483b2`, retrieved 2026-09-26, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc12040dver-datasheet.pdf)
page.jsonadded+204
@@ -0,0 +1,204 @@+{+  "slug": "ucc12040dver",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "ucc12040dver",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ucc12040dver.kicad_sym",+    "ucc12040dver.kicad_mod",+    "ucc12040dver.glb",+    "ucc12040dver.step",+    "ucc12040dver.lbr",+    "docs/hero.png",+    "docs/ucc12040dver-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "UCC12040DVER",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-16-300mil",+    "pin_count": 16,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ucc12040",+    "parts": {+      "symbol": "ucc12040dver.kicad_sym",+      "footprint": "ucc12040dver.kicad_mod",+      "model_3d": "ucc12040dver-etched.glb",+      "model_3d_plain": "ucc12040dver.glb",+      "model_3d_step": "ucc12040dver-etched.step",+      "model_3d_step_plain": "ucc12040dver.step",+      "lbr": "ucc12040dver.lbr"+    },+    "distributor_links": {+      "lcsc": "C5216535",+      "digikey": "296-UCC12040DVERTR-ND",+      "mouser": "595-UCC12040DVER"+    },+    "distributor_check": {+      "checked_at": "2026-09-26T19:31:01Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-UCC12040DVERTR-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-UCC12040DVER",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "EN",+        "type": "input",+        "description": "Enable pin; forcing EN low disables the device, pull high to enable normal device functionality."+      },+      {+        "number": "2",+        "name": "GNDP",+        "type": "power_in",+        "description": "Power ground return connection for VINP."+      },+      {+        "number": "3",+        "name": "VINP",+        "type": "power_in",+        "description": "Primary side input supply voltage pin; 4.5 V to 5.5 V operating range with 10-μF ceramic capacitor to GNDP required."+      },+      {+        "number": "4",+        "name": "SYNC",+        "type": "input",+        "description": "Synchronous clock input pin; external clock range 14.4 MHz to 17.6 MHz or connect to GNDP for standalone internal oscillator operation."+      },+      {+        "number": "5",+        "name": "SYNC_OK",+        "type": "output",+        "description": "Active-low open-drain diagnostic output asserted LOW when external SYNC clock is absent or outside operating range."+      },+      {+        "number": "6",+        "name": "NC",+        "type": "unconnected",+        "description": "Internally connected pin for primary-side voltage domain; connect to GNDP on printed circuit board."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "Internally connected pin for primary-side voltage domain; connect to GNDP on printed circuit board."+      },+      {+        "number": "8",+        "name": "NC",+        "type": "unconnected",+        "description": "Internally connected pin for primary-side voltage domain; connect to GNDP on printed circuit board."+      },+      {+        "number": "9",+        "name": "GNDS",+        "type": "power_in",+        "description": "Connect to GNDS plane on printed circuit board; ensure pin 15 is connected to circuit ground and do not use as only ground connection for VISO."+      },+      {+        "number": "10",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection pin for isolated voltage domain; connect to GNDS on printed circuit board."+      },+      {+        "number": "11",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection pin for isolated voltage domain; connect to GNDS on printed circuit board."+      },+      {+        "number": "12",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection pin for isolated voltage domain; connect to GNDS on printed circuit board."+      },+      {+        "number": "13",+        "name": "SEL",+        "type": "input",+        "description": "VISO selection pin determining output voltage: 5.0 V (shorted to VISO), 5.4 V (100 kΩ to VISO), 3.3 V (shorted to GNDS), or 3.7 V (100 kΩ to GNDS)."+      },+      {+        "number": "14",+        "name": "VISO",+        "type": "power_out",+        "description": "Isolated supply voltage output pin (3.3 V to 5.4 V selectable) with 10-μF ceramic capacitor to GNDS on pin 15 required."+      },+      {+        "number": "15",+        "name": "GNDS",+        "type": "power_in",+        "description": "Secondary side ground return connection for VISO; connect bypass capacitor from VISO to this pin."+      },+      {+        "number": "16",+        "name": "GNDS",+        "type": "power_in",+        "description": "Connect to GNDS plane on printed circuit board; ensure pin 15 is connected to circuit ground and do not use as only ground connection for VISO."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 36,+        "cost_usd": 0.357,+        "at": "2026-09-26T19:30:43"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ucc12040",+        "pages": 36,+        "sha256": "db9973072db483b2",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file