UC3845BD

{
  "slug": "uc3845bd",
  "version": "0.1.0",
  "type": "component",
  "description": "lingxingic AC-DC Controllers And Regulators, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "uc3845bd",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "uc3845bd.kicad_sym",
    "uc3845bd.kicad_mod",
    "uc3845bd.glb",
    "uc3845bd.step",
    "uc3845bd.lbr",
    "docs/hero.png",
    "docs/uc3845bd-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "uc3845bd-hero.glb",
    "uc3845bd-hero.overlay.json",
    "uc3845bd-etched.glb"
  ],
  "component": {
    "mpn": "UC3845BD",
    "manufacturer": "lingxingic",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603345531880431616",
    "parts": {
      "symbol": "uc3845bd.kicad_sym",
      "footprint": "uc3845bd.kicad_mod",
      "model_3d": "uc3845bd-hero.glb",
      "model_3d_plain": "uc3845bd-etched.glb",
      "model_3d_step": "uc3845bd-etched.step",
      "model_3d_step_plain": "uc3845bd.step",
      "lbr": "uc3845bd.lbr"
    },
    "distributor_links": {
      "lcsc": "C22397225"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T12:45:41Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "COMP",
        "type": "output",
        "description": "This is the error amplifier output, made available for loop compensation; the datasheet states the error amplifier output sink current is limited to 10 mA absolute maximum."
      },
      {
        "number": "2",
        "name": "VFB",
        "type": "input",
        "description": "This is the inverting input of the error amplifier, normally connected to the switching power supply output through a resistor divider; the analog inputs are rated -0.3 V to +6.3 V."
      },
      {
        "number": "3",
        "name": "ISENSE",
        "type": "input",
        "description": "A voltage proportional to inductor current is applied here and the PWM uses it to terminate output switch conduction; the current-sense maximum input signal is 1 V typical (0.9 V to 1.1 V)."
      },
      {
        "number": "4",
        "name": "RT/CT",
        "type": "passive",
        "description": "Resistor RT to VREF and capacitor CT to ground set the oscillator frequency and maximum output duty cycle, with operation to 500 kHz possible."
      },
      {
        "number": "5",
        "name": "GROUND",
        "type": "power_in",
        "description": "This is the combined control circuitry and power ground."
      },
      {
        "number": "6",
        "name": "OUTPUT",
        "type": "output",
        "description": "This output directly drives the gate of a power MOSFET, sourcing and sinking peak currents up to 1 A; the absolute maximum output current is ±1 A."
      },
      {
        "number": "7",
        "name": "Vi",
        "type": "power_in",
        "description": "This is the positive supply of the control IC; the absolute maximum supply voltage is 30 V from a low impedance source."
      },
      {
        "number": "8",
        "name": "VREF",
        "type": "power_out",
        "description": "This is the reference output, specified at 5.00 V typical (4.90 V to 5.10 V at Io = 1 mA), and it provides charging current for CT through RT."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The SOP-8 package drawing (section 5.2, page 8) is image-only in the extracted text, so the SOP-8 pi; The datasheet covers the whole UC384X family; the UC3845 is the 8.8 V on / 7.6 V off UVLO and 50% ma; RT/CT is typed as passive because the datasheet describes it as a resistor and capacitor timing node",
          "1/8 pin names appear NOWHERE in the datasheet text: ['5:GROUND@p3']"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0433,
        "at": "2026-10-18T12:44:58"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603345531880431616",
        "pages": 9,
        "sha256": "796cb0db85826697",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "uc3845bd.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "uc3845bd-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "19aa8feedc7677325ce3b9a5bedf2620198a3658cb36ec886ac1c1c4990cec5e",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}