← Commit history

Initial commit: component/uc3843dtr

Ray ·756503ec88 ·
2 files changed +228
README.mdadded+51
@@ -0,0 +1,51 @@+# UC3843DTR++**Texas Instruments** · AC-DC Controllers And Regulators · SOIC-14++UC3843DTR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COMP | output | Error-amplifier compensation pin; connect external compensation components here to shape the error-amplifier output, and the amplifier's internal current limit allows COMP to be forced externally to GROUND to command zero duty cycle. |+| 2 | NC | unconnected | No internal connection. |+| 3 | VFB | input | Inverting input of the internal error amplifier, used to close the power-converter voltage-feedback loop for regulation stability; keep lead length and stray capacitance minimal. |+| 4 | NC | unconnected | No internal connection. |+| 5 | ISENSE | input | Primary-side current-sense input connected to the current-sense resistor; the PWM comparator uses this signal to terminate the OUTPUT switch's on-time, and a voltage ramp can be applied here for voltage-mode operation or slope compensation. |+| 6 | NC | unconnected | No internal connection. |+| 7 | RT/CT | bidirectional | Fixed-frequency oscillator timing pin; connect timing resistor RRT from VREF to this pin and timing capacitor CCT from this pin to GROUND to set fOSC = 1.72/(RRT × CCT), with RRT never below 5kΩ. |+| 8 | PWRGND | power_in | Power ground pin, separate from analog GROUND on this 14-pin package, used as the return for the high-current gate-drive output stage. |+| 9 | GROUND | power_in | Analog signal/reference ground for the device; TI recommends keeping this signal return separate from the high-current gate-driver ground path. |+| 10 | OUTPUT | output | High-current bipolar totem-pole gate-drive output for an external N-channel MOSFET, capable of sourcing/sinking peak currents up to 1A and actively held low when VCC is below the UVLO turn-on threshold. |+| 11 | VC | power_in | Bias-supply input dedicated to the output gate driver stage; requires a bypass capacitor with capacitance at least 10x the main switching FET's gate capacitance. |+| 12 | VCC | power_in | Analog controller bias-supply input; total VCC current equals the quiescent current plus the average OUTPUT current (IOUTPUT = Qg × fSW), and requires a 0.1µF bypass capacitor to GROUND plus an additional capacitor at least 10x the switching FET gate capacitance. |+| 13 | NC | unconnected | No internal connection. |+| 14 | VREF | power_out | 5V internal reference output used to charge the oscillator timing capacitor through the timing resistor and to bias internal circuitry; requires a ceramic bypass capacitor of at least 0.1µF placed as close as possible to the pin, with additional bypass for any external load on VREF. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-14 |+| Category | Power Management (PMIC) |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `UC3843DTR`+- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`+- 3D model: SOIC-14 (KiCad packages3D, STEP)+- 3D model files: `uc3843dtr-etched.step` / `uc3843dtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `uc3843dtr.step` / `uc3843dtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/uc3842) (61 pp, sha256 `0f875fd24cbb5fda`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/uc3843dtr-datasheet.pdf)
page.jsonadded+177
@@ -0,0 +1,177 @@+{+  "slug": "uc3843dtr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "uc3843dtr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "uc3843dtr.kicad_sym",+    "uc3843dtr.kicad_mod",+    "uc3843dtr.glb",+    "uc3843dtr.step",+    "uc3843dtr.lbr",+    "docs/hero.png",+    "docs/uc3843dtr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "UC3843DTR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-14",+    "pin_count": 14,+    "category": "Power Management (PMIC)",+    "subcategory": "AC-DC Controllers And Regulators",+    "datasheet": "https://www.ti.com/cn/lit/gpn/uc3842",+    "parts": {+      "symbol": "uc3843dtr.kicad_sym",+      "footprint": "uc3843dtr.kicad_mod",+      "model_3d": "uc3843dtr-etched.glb",+      "model_3d_plain": "uc3843dtr.glb",+      "model_3d_step": "uc3843dtr-etched.step",+      "model_3d_step_plain": "uc3843dtr.step",+      "lbr": "uc3843dtr.lbr"+    },+    "distributor_links": {+      "lcsc": "C702406"+    },+    "pins": [+      {+        "number": "1",+        "name": "COMP",+        "type": "output",+        "description": "Error-amplifier compensation pin; connect external compensation components here to shape the error-amplifier output, and the amplifier's internal current limit allows COMP to be forced externally to GROUND to command zero duty cycle."+      },+      {+        "number": "2",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "3",+        "name": "VFB",+        "type": "input",+        "description": "Inverting input of the internal error amplifier, used to close the power-converter voltage-feedback loop for regulation stability; keep lead length and stray capacitance minimal."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "5",+        "name": "ISENSE",+        "type": "input",+        "description": "Primary-side current-sense input connected to the current-sense resistor; the PWM comparator uses this signal to terminate the OUTPUT switch's on-time, and a voltage ramp can be applied here for voltage-mode operation or slope compensation."+      },+      {+        "number": "6",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "7",+        "name": "RT/CT",+        "type": "bidirectional",+        "description": "Fixed-frequency oscillator timing pin; connect timing resistor RRT from VREF to this pin and timing capacitor CCT from this pin to GROUND to set fOSC = 1.72/(RRT × CCT), with RRT never below 5kΩ."+      },+      {+        "number": "8",+        "name": "PWRGND",+        "type": "power_in",+        "description": "Power ground pin, separate from analog GROUND on this 14-pin package, used as the return for the high-current gate-drive output stage."+      },+      {+        "number": "9",+        "name": "GROUND",+        "type": "power_in",+        "description": "Analog signal/reference ground for the device; TI recommends keeping this signal return separate from the high-current gate-driver ground path."+      },+      {+        "number": "10",+        "name": "OUTPUT",+        "type": "output",+        "description": "High-current bipolar totem-pole gate-drive output for an external N-channel MOSFET, capable of sourcing/sinking peak currents up to 1A and actively held low when VCC is below the UVLO turn-on threshold."+      },+      {+        "number": "11",+        "name": "VC",+        "type": "power_in",+        "description": "Bias-supply input dedicated to the output gate driver stage; requires a bypass capacitor with capacitance at least 10x the main switching FET's gate capacitance."+      },+      {+        "number": "12",+        "name": "VCC",+        "type": "power_in",+        "description": "Analog controller bias-supply input; total VCC current equals the quiescent current plus the average OUTPUT current (IOUTPUT = Qg × fSW), and requires a 0.1µF bypass capacitor to GROUND plus an additional capacitor at least 10x the switching FET gate capacitance."+      },+      {+        "number": "13",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "14",+        "name": "VREF",+        "type": "power_out",+        "description": "5V internal reference output used to charge the oscillator timing capacitor through the timing resistor and to bias internal circuitry; requires a ceramic bypass capacitor of at least 0.1µF placed as close as possible to the pin, with additional bypass for any external load on VREF."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 61,+        "cost_usd": 0.7309,+        "at": "2026-09-24T08:10:59"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/uc3842",+        "pages": 61,+        "sha256": "0f875fd24cbb5fda",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file