component

UC3843AL-D08-T

Public Made by Adom

by adom

UTC(Unisonic Tech) AC-DC Controllers & Regulators, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management icsuc3843al-d08-tfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
uc3843al-d08-t / README.md
History Download
Ray Publish 0.1.0 666204c 16d ago

UC3843AL-D08-T

UTC(Unisonic Tech) · AC-DC Controllers & Regulators · DIP-8

UC3843AL-D08-T from UTC(Unisonic Tech), in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP output Error amplifier output for loop compensation, which sinks 2 mA min and sources 0.5 mA min, and pulling it below two diode drops above ground shuts the output down.
2 VFB input Error amplifier inverting (voltage feedback) input regulated to 2.5 V typ (2.42-2.58 V), with analog input range -0.3 to +6.3 V.
3 Current Sense input Current sense comparator input where peak current is ISMAX = 1.0 V/Rs, with analog input range -0.3 to +6.3 V, and raising it above 1 V shuts down the output.
4 RT/CT passive Oscillator timing pin for the external RT and CT, giving 52 kHz typ (47-57 kHz) at RT=10 kΩ and CT=3.3 nF.
5 GND power_in Ground, where timing and bypass capacitors should be connected close to this pin in a single-point ground.
6 Output output Totem-pole output driving a MOSFET gate with ±1 A peak current, high impedance during under-voltage lockout, so shunt it to GND with a bleeder resistor.
7 VCC power_in Supply input rated 30 V max from a low-impedance source, with 34 V typ zener clamp at 25 mA, UC3843A start threshold 8.4 V typ (7.8-9 V) and minimum operating voltage 7.6 V typ.
8 VREF power_out 5 V reference output (4.9-5.1 V at 1 mA, 25°C) with short-circuit current of -100 mA typ.

Key specifications

Parameter Value
Manufacturer UTC(Unisonic Tech)
Package DIP-8
Category Power Management ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (Low Impedance Source) VCC 30 V TA=25℃ 3
Analog Inputs (Pin 2,3) VI(ANA) -0.3 6.3 V TA=25℃ 3
Output Current (Peak) IO(PEAK) -1 1 A TA=25℃ 3
Error Amplifier Output Sink Current ISINK(EA) 10 mA TA=25℃ 3
Output Energy (Capacity Load) 5 μJ TA=25℃ 3
Power Dissipation DIP-8 PD 1250 mW TA≦25℃ 3
Power Dissipation Derating 8 mW/℃ Derated at TA>25℃ 3
Junction Temperature TJ 150 ℃ TA=25℃ 3
Storage Temperature TSTG -65 150 ℃ TA=25℃ 3
Reference Output Voltage VREF 4.9 5 5.1 V TJ=25℃,IOUT=1mA 3
Line Regulation ΔVREF 6 20 mV 12≦VIN25V 3
Load Regulation ΔVREF 6 25 mV 1≦IOUT=20mA 3
Reference Temperature Stability 0.2 0.4 mV/℃ Note 1 3
Total Output Variation 4.82 5.18 V Line, Load, Temp (Note 1) 3
Output Noise Voltage VOSC 50 μV 10Hz≦f≦10kHz,TJ=25℃ (Note 1) 3
Long Term Stability 5 25 mV TA=25℃,1000Hrs (Note 1) 3
Output Short Circuit ISC -180 -100 -30 mA 3
Oscillator Initial Accuracy f 47 52 57 kHz TJ=25℃ 3
Oscillator Voltage Stability Δf/ΔVCC 0.2 1 % 12≦VCC≦25V 3
Oscillator Temperature Stability 5 % TMIN≦TA≦TMAX (Note 1) 3
Oscillator Amplitude VOSC 1.7 V VPIN4 peak to peak 3
EA Input Voltage VI(EA) 2.42 2.5 2.58 V VPIN1=2.5V 3
EA Input Bias Current II(BIAS) -0.3 -2 μA 3
EA Open-Loop Gain AVOL 60 90 dB 2V ≦VOUT≦4V 3
Unity Gain Bandwidth 0.7 1 MHz TJ=25℃ (Note 1) 3
EA PSRR PSRR 60 70 dB I2≦VCC≦25V 3
EA Output Sink Current IO(SINK) 2 6 mA VPIN2=2.7V,VPIN1=1.1V 3
EA Output Source Current IO(SOURCE) -0.5 -0.8 mA VPIN2=2.3V,VPIN1=5V 3
EA VOUT High VOH 5 6 V VPIN2=2.3V, RL=15kΩ to GND 3
EA VOUT Low VOL 0.7 1.1 V VPIN2=2.7V,VPIN1=1.1V 3
Current Sense Gain GV 2.85 3 3.15 V/V Note 2, 3 4
Maximum Input Signal VI(MAX) 0.9 1 1.1 V VPIN1=5V (Note 2) 4
Current Sense PSRR PSRR 70 dB 12V≦VCC≦25V 4
Current Sense Input Bias Current IBIAS -2 -10 μA 4
Delay to Output 150 300 ns VPIN3=0 to 2V 4
Output Low Level VOL 0.1 0.4 V IO(SINK)=20mA 4
Output Low Level VOL 1.5 2.2 V IO(SINK)=200mA 4
Output High Level VOH 13 13.5 V IO(SOURCE)=20mA 4
Output High Level VOH 12 13.5 V IO(SOURCE)=200mA 4
Rise Time tR 50 150 ns TJ=25℃,CL=1nF (Note 1) 4
Fall Time tF 50 150 ns TJ=25℃,CL=1nF (Note 1) 4
Start Threshold 3843A VTH(ST) 7.8 8.4 9 V 4
Min. Operating Voltage 3843A VOPR(MIN) 7 7.6 8.2 V After Turn On 4
Duty Cycle MAX D(MAX) 95 97 100 % 4
Duty Cycle MIN D(MIN) 0 % 4
Start-up Current IST 0.12 0.3 mA 4
Operating Supply Current ICC(OPR) 11 17 mA VPIN2=VPIN3=0V 4
VCC Zener Voltage Vz 34 V ICC=25mA 4

CAD (KiCad official)

  • Symbol: UC3843AL-D08-T
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: uc3843al-d08-t-etched.step / uc3843al-d08-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); uc3843al-d08-t.step / uc3843al-d08-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UTC(Unisonic Tech) datasheet (9 pp, sha256 156578ac13622df2, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF