← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# UC3825DWTR++**Texas Instruments** · AC-DC Controllers And Regulators · SOIC-16-300mil++UC3825DWTR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | INV | input | Inverting input to the wide-bandwidth error amplifier (voltage feedback input); rated as an analog input from -0.3V to 7V absolute maximum, with 10-15mV input offset voltage and up to 3µA input bias current. |+| 2 | NI | input | Noninverting input to the error amplifier; rated as an analog input from -0.3V to 7V absolute maximum, used together with INV for closed-loop voltage/current-mode compensation. |+| 3 | E/A Out | output | Error amplifier output / PWM comparator input node; output current limited to 5mA absolute maximum, sink current 1-2.5mA, source current -0.5 to -1.3mA, output high 4.0-5.0V and output low 0-1.0V. |+| 4 | Clock | output | Oscillator clock output used for synchronizing multiple devices; output current limited to -5mA absolute maximum, with Clock-Out-High of 3.9-4.5V and Clock-Out-Low of 2.3-2.9V. |+| 5 | RT | passive | Oscillator timing-resistor pin that sets the oscillator charging current together with CT; rated as an analog input from -0.3V to 7V with oscillator charging current limited to -5mA absolute maximum. |+| 6 | CT | passive | Oscillator timing-capacitor pin whose external capacitor together with RT sets the oscillator frequency; rated as an analog input from -0.3V to 6V absolute maximum. |+| 7 | Ramp | input | PWM comparator ramp/current-sense input compared against the E/A Out signal; bias current -1 to -5µA, analog input range -0.3V to 6V, with 50-80ns delay to output. |+| 8 | Soft Start | passive | Soft-start / maximum duty-cycle clamp pin for an external timing capacitor; charge current 3-9-20µA, discharge current up to 1mA typical, and sink current limited to 20mA absolute maximum, analog voltage range -0.3V to 6V. |+| 9 | ILIM/SD | input | TTL-compatible current-limit and shutdown input; current-limit threshold 0.9-1.1V, shutdown threshold 1.25-1.55V, bias current up to 15µA (10µA UC3825), delay to output 50-80ns, analog voltage range -0.3V to 6V absolute maximum. |+| 10 | Gnd | power_in | Analog signal ground reference for the control circuitry, separate from the power output ground (Pwr Gnd) to minimize switching noise coupling. |+| 11 | Out A | output | High-current totem-pole output A capable of 1.5A peak source/sink; DC current limited to 0.5A and pulse current to 2.0A (0.5µs) absolute maximum, output low 0.25-2.2V and output high 12.0-13.5V depending on load, rise/fall time 30-60ns into 1nF. |+| 12 | Pwr Gnd | power_in | Power ground return for the high-current totem-pole output stages, kept separate from analog Gnd to reduce switching noise injection into the control circuitry. |+| 13 | VC | power_in | Supply voltage pin for the output totem-pole driver stages; absolute maximum rating of 30V, intended to be bypassed with a 0.1µF low-ESL ceramic capacitor close to the pin. |+| 14 | Out B | output | High-current totem-pole output B, identical ratings to Out A: 1.5A peak, 0.5A DC, 2.0A pulse (0.5µs) absolute maximum, with matching output-low/output-high and rise/fall-time specifications. |+| 15 | VCC | power_in | Main chip supply voltage input, absolute maximum 30V; under-voltage lockout start threshold 8.8-9.6V with 0.4-1.2V hysteresis, start-up current 1.1-2.5mA at VCC=8V, and operating supply current ICC of 22-33mA. |+| 16 | VREF | power_out | Precision 5.1V reference output (5.00-5.20V total variation for UC3825) rated for IO up to 10mA load regulation testing, with short-circuit current of -15 to -100mA; used to bias external circuitry and set UVLO thresholds. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16-300mil |+| Category | Power Management (PMIC) |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `UC3825DWTR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)+- 3D model files: `uc3825dwtr-etched.step` / `uc3825dwtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `uc3825dwtr.step` / `uc3825dwtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/uc3825) (23 pp, sha256 `62f4a96c2122b13d`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/uc3825dwtr-datasheet.pdf)
page.jsonadded+191@@ -0,0 +1,191 @@+{+ "slug": "uc3825dwtr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "uc3825dwtr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "uc3825dwtr.kicad_sym",+ "uc3825dwtr.kicad_mod",+ "uc3825dwtr.glb",+ "uc3825dwtr.step",+ "uc3825dwtr.lbr",+ "docs/hero.png",+ "docs/uc3825dwtr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "UC3825DWTR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-16-300mil",+ "pin_count": 16,+ "category": "Power Management (PMIC)",+ "subcategory": "AC-DC Controllers And Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/uc3825",+ "parts": {+ "symbol": "uc3825dwtr.kicad_sym",+ "footprint": "uc3825dwtr.kicad_mod",+ "model_3d": "uc3825dwtr-etched.glb",+ "model_3d_plain": "uc3825dwtr.glb",+ "model_3d_step": "uc3825dwtr-etched.step",+ "model_3d_step_plain": "uc3825dwtr.step",+ "lbr": "uc3825dwtr.lbr"+ },+ "distributor_links": {+ "lcsc": "C180434"+ },+ "pins": [+ {+ "number": "1",+ "name": "INV",+ "type": "input",+ "description": "Inverting input to the wide-bandwidth error amplifier (voltage feedback input); rated as an analog input from -0.3V to 7V absolute maximum, with 10-15mV input offset voltage and up to 3µA input bias current."+ },+ {+ "number": "2",+ "name": "NI",+ "type": "input",+ "description": "Noninverting input to the error amplifier; rated as an analog input from -0.3V to 7V absolute maximum, used together with INV for closed-loop voltage/current-mode compensation."+ },+ {+ "number": "3",+ "name": "E/A Out",+ "type": "output",+ "description": "Error amplifier output / PWM comparator input node; output current limited to 5mA absolute maximum, sink current 1-2.5mA, source current -0.5 to -1.3mA, output high 4.0-5.0V and output low 0-1.0V."+ },+ {+ "number": "4",+ "name": "Clock",+ "type": "output",+ "description": "Oscillator clock output used for synchronizing multiple devices; output current limited to -5mA absolute maximum, with Clock-Out-High of 3.9-4.5V and Clock-Out-Low of 2.3-2.9V."+ },+ {+ "number": "5",+ "name": "RT",+ "type": "passive",+ "description": "Oscillator timing-resistor pin that sets the oscillator charging current together with CT; rated as an analog input from -0.3V to 7V with oscillator charging current limited to -5mA absolute maximum."+ },+ {+ "number": "6",+ "name": "CT",+ "type": "passive",+ "description": "Oscillator timing-capacitor pin whose external capacitor together with RT sets the oscillator frequency; rated as an analog input from -0.3V to 6V absolute maximum."+ },+ {+ "number": "7",+ "name": "Ramp",+ "type": "input",+ "description": "PWM comparator ramp/current-sense input compared against the E/A Out signal; bias current -1 to -5µA, analog input range -0.3V to 6V, with 50-80ns delay to output."+ },+ {+ "number": "8",+ "name": "Soft Start",+ "type": "passive",+ "description": "Soft-start / maximum duty-cycle clamp pin for an external timing capacitor; charge current 3-9-20µA, discharge current up to 1mA typical, and sink current limited to 20mA absolute maximum, analog voltage range -0.3V to 6V."+ },+ {+ "number": "9",+ "name": "ILIM/SD",+ "type": "input",+ "description": "TTL-compatible current-limit and shutdown input; current-limit threshold 0.9-1.1V, shutdown threshold 1.25-1.55V, bias current up to 15µA (10µA UC3825), delay to output 50-80ns, analog voltage range -0.3V to 6V absolute maximum."+ },+ {+ "number": "10",+ "name": "Gnd",+ "type": "power_in",+ "description": "Analog signal ground reference for the control circuitry, separate from the power output ground (Pwr Gnd) to minimize switching noise coupling."+ },+ {+ "number": "11",+ "name": "Out A",+ "type": "output",+ "description": "High-current totem-pole output A capable of 1.5A peak source/sink; DC current limited to 0.5A and pulse current to 2.0A (0.5µs) absolute maximum, output low 0.25-2.2V and output high 12.0-13.5V depending on load, rise/fall time 30-60ns into 1nF."+ },+ {+ "number": "12",+ "name": "Pwr Gnd",+ "type": "power_in",+ "description": "Power ground return for the high-current totem-pole output stages, kept separate from analog Gnd to reduce switching noise injection into the control circuitry."+ },+ {+ "number": "13",+ "name": "VC",+ "type": "power_in",+ "description": "Supply voltage pin for the output totem-pole driver stages; absolute maximum rating of 30V, intended to be bypassed with a 0.1µF low-ESL ceramic capacitor close to the pin."+ },+ {+ "number": "14",+ "name": "Out B",+ "type": "output",+ "description": "High-current totem-pole output B, identical ratings to Out A: 1.5A peak, 0.5A DC, 2.0A pulse (0.5µs) absolute maximum, with matching output-low/output-high and rise/fall-time specifications."+ },+ {+ "number": "15",+ "name": "VCC",+ "type": "power_in",+ "description": "Main chip supply voltage input, absolute maximum 30V; under-voltage lockout start threshold 8.8-9.6V with 0.4-1.2V hysteresis, start-up current 1.1-2.5mA at VCC=8V, and operating supply current ICC of 22-33mA."+ },+ {+ "number": "16",+ "name": "VREF",+ "type": "power_out",+ "description": "Precision 5.1V reference output (5.00-5.20V total variation for UC3825) rated for IO up to 10mA load regulation testing, with short-circuit current of -15 to -100mA; used to bias external circuitry and set UVLO thresholds."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Absolute maximum ratings section on page 2 specifies 'Output Current, Source or Sink (Pins 11, 14)' ; Pin assignments in electrical characteristics section have apparent inconsistencies with PIN FUNCTIO; Feature list mentions 'High Current Dual Totem Pole Outputs (1.5A Peak)' but only Out A is shown in "+ ],+ "pages_sent": 23,+ "cost_usd": 0.347,+ "at": "2026-09-23T22:22:03"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/uc3825",+ "pages": 23,+ "sha256": "62f4a96c2122b13d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}