Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

UC3825DWTR

Texas Instruments · AC-DC Controllers And Regulators · SOIC-16-300mil

UC3825DWTR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INV input Inverting input to the wide-bandwidth error amplifier (voltage feedback input); rated as an analog input from -0.3V to 7V absolute maximum, with 10-15mV input offset voltage and up to 3µA input bias current.
2 NI input Noninverting input to the error amplifier; rated as an analog input from -0.3V to 7V absolute maximum, used together with INV for closed-loop voltage/current-mode compensation.
3 E/A Out output Error amplifier output / PWM comparator input node; output current limited to 5mA absolute maximum, sink current 1-2.5mA, source current -0.5 to -1.3mA, output high 4.0-5.0V and output low 0-1.0V.
4 Clock output Oscillator clock output used for synchronizing multiple devices; output current limited to -5mA absolute maximum, with Clock-Out-High of 3.9-4.5V and Clock-Out-Low of 2.3-2.9V.
5 RT passive Oscillator timing-resistor pin that sets the oscillator charging current together with CT; rated as an analog input from -0.3V to 7V with oscillator charging current limited to -5mA absolute maximum.
6 CT passive Oscillator timing-capacitor pin whose external capacitor together with RT sets the oscillator frequency; rated as an analog input from -0.3V to 6V absolute maximum.
7 Ramp input PWM comparator ramp/current-sense input compared against the E/A Out signal; bias current -1 to -5µA, analog input range -0.3V to 6V, with 50-80ns delay to output.
8 Soft Start passive Soft-start / maximum duty-cycle clamp pin for an external timing capacitor; charge current 3-9-20µA, discharge current up to 1mA typical, and sink current limited to 20mA absolute maximum, analog voltage range -0.3V to 6V.
9 ILIM/SD input TTL-compatible current-limit and shutdown input; current-limit threshold 0.9-1.1V, shutdown threshold 1.25-1.55V, bias current up to 15µA (10µA UC3825), delay to output 50-80ns, analog voltage range -0.3V to 6V absolute maximum.
10 Gnd power_in Analog signal ground reference for the control circuitry, separate from the power output ground (Pwr Gnd) to minimize switching noise coupling.
11 Out A output High-current totem-pole output A capable of 1.5A peak source/sink; DC current limited to 0.5A and pulse current to 2.0A (0.5µs) absolute maximum, output low 0.25-2.2V and output high 12.0-13.5V depending on load, rise/fall time 30-60ns into 1nF.
12 Pwr Gnd power_in Power ground return for the high-current totem-pole output stages, kept separate from analog Gnd to reduce switching noise injection into the control circuitry.
13 VC power_in Supply voltage pin for the output totem-pole driver stages; absolute maximum rating of 30V, intended to be bypassed with a 0.1µF low-ESL ceramic capacitor close to the pin.
14 Out B output High-current totem-pole output B, identical ratings to Out A: 1.5A peak, 0.5A DC, 2.0A pulse (0.5µs) absolute maximum, with matching output-low/output-high and rise/fall-time specifications.
15 VCC power_in Main chip supply voltage input, absolute maximum 30V; under-voltage lockout start threshold 8.8-9.6V with 0.4-1.2V hysteresis, start-up current 1.1-2.5mA at VCC=8V, and operating supply current ICC of 22-33mA.
16 VREF power_out Precision 5.1V reference output (5.00-5.20V total variation for UC3825) rated for IO up to 10mA load regulation testing, with short-circuit current of -15 to -100mA; used to bias external circuitry and set UVLO thresholds.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Power Management (PMIC)
Pins 16

CAD (KiCad official)

  • Symbol: UC3825DWTR
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: uc3825dwtr-etched.step / uc3825dwtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); uc3825dwtr.step / uc3825dwtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 62f4a96c2122b13d, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF