Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

UC3823N

Texas Instruments · Power Management Specialized - PMIC · PDIP-16

UC3823N from Texas Instruments, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Inv. input Inverting input of the wide-bandwidth error amplifier; analog inputs are rated -0.3 V to +6 V.
2 N.I. input Non-inverting input of the error amplifier; analog inputs are rated -0.3 V to +6 V.
3 E/A Out output Error amplifier output, with a maximum output current of 5 mA.
4 Clock output Oscillator clock output, with a maximum output current of -5 mA.
5 RT passive Oscillator timing resistor connection, with a maximum oscillator charging current of -5 mA.
6 CT passive Oscillator timing capacitor connection that sets the switching frequency together with RT.
7 Ramp input Ramp input to the PWM comparator for voltage-mode or slope-compensated operation; analog inputs are rated -0.3 V to +6 V.
8 Soft Start passive Soft-start pin that also acts as a maximum duty cycle clamp, with a maximum sink current of 20 mA.
9 ILIM/S.D. input Current limit/shutdown comparator input with a 1.4 V threshold; analog inputs are rated -0.3 V to +6 V.
10 Ground power_in Signal ground, the reference for all voltages.
11 ILIMREF input DC reference voltage input to the current limit comparator; analog inputs are rated -0.3 V to +6 V.
12 Pwr Gnd power_in Power ground for the totem-pole output stage.
13 Vc power_in Supply for the totem-pole output stage, with an absolute maximum of 30 V.
14 Out output Totem-pole output (1.5 A peak) that sources and sinks current, rated 0.5 A DC and 2.0 A for a 0.5 µs pulse.
15 Vcc power_in Positive supply voltage with an absolute maximum of 30 V and a 9 V undervoltage lockout threshold.
16 VREF power_out 5.1 V trimmed bandgap reference output (5.00 V to 5.20 V for the UC3823), with a short-circuit current of -15 mA to -100 mA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-16
Category Power Supply Chip
Pins 16

CAD (KiCad official)

  • Symbol: UC3823N
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: PDIP-16 (KiCad packages3D, STEP)
  • 3D model files: uc3823n-etched.step / uc3823n-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); uc3823n.step / uc3823n.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (13 pp, sha256 07ae6899fef011e0, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF