main
Ray Publish 0.1.0 fe1a979
{
  "slug": "uc3706dw",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Gate Drivers, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "uc3706dw",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "uc3706dw.kicad_sym",
    "uc3706dw.kicad_mod",
    "uc3706dw.glb",
    "uc3706dw.step",
    "uc3706dw.lbr",
    "docs/hero.png",
    "docs/uc3706dw-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "uc3706dw-hero.glb",
    "uc3706dw-hero.overlay.json",
    "uc3706dw-etched.glb"
  ],
  "component": {
    "mpn": "UC3706DW",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Motor Driver ICs",
    "subcategory": "Gate Drivers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/uc3706.pdf",
    "parts": {
      "symbol": "uc3706dw.kicad_sym",
      "footprint": "uc3706dw.kicad_mod",
      "model_3d": "uc3706dw-hero.glb",
      "model_3d_plain": "uc3706dw-etched.glb",
      "model_3d_step": "uc3706dw-etched.step",
      "model_3d_step_plain": "uc3706dw.step",
      "lbr": "uc3706dw.lbr"
    },
    "distributor_links": {
      "lcsc": "C1549459",
      "digikey": "2156-UC3706DW-ND",
      "mouser": "595-UC3706DW"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T03:19:23Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2156-UC3706DW-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-UC3706DW",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "B INHIBIT",
        "type": "input",
        "description": "Inhibit input for output B; a diode to the opposite power switch collector keeps one output from turning on until the other has turned off, and it is left open when the inhibit circuit is unused."
      },
      {
        "number": "2",
        "name": "INV. INPUT",
        "type": "input",
        "description": "Inverting TTL-compatible digital input with a threshold of approximately 1.2V, no hysteresis, and a 5.5V maximum."
      },
      {
        "number": "3",
        "name": "N.I. INPUT",
        "type": "input",
        "description": "Non-inverting TTL-compatible digital input with a threshold of approximately 1.2V, no hysteresis, and a 5.5V maximum."
      },
      {
        "number": "4",
        "name": "GROUND",
        "type": "power_in",
        "description": "Ground pin, which must be connected to a common ground together with the other three ground pins."
      },
      {
        "number": "5",
        "name": "GROUND",
        "type": "power_in",
        "description": "Ground pin, which must be connected to a common ground together with the other three ground pins."
      },
      {
        "number": "6",
        "name": "A OUTPUT",
        "type": "output",
        "description": "Totem-pole output A that sources or sinks up to 1.5A peak (±500mA steady-state)."
      },
      {
        "number": "7",
        "name": "FLIP/FLOP",
        "type": "input",
        "description": "Grounding this pin activates the internal flip-flop to alternate the two outputs, and leaving it open makes the outputs operate simultaneously so they can be paralleled."
      },
      {
        "number": "8",
        "name": "VC",
        "type": "power_in",
        "description": "Collector supply for the output stages, rated 40V maximum, and it draws no current when VIN is low."
      },
      {
        "number": "9",
        "name": "STOP INV.",
        "type": "input",
        "description": "Inverting input of the analog shutdown comparator with a 130mV internal threshold, which is grounded when unused."
      },
      {
        "number": "10",
        "name": "STOP NON-INV.",
        "type": "input",
        "description": "Non-inverting input of the analog shutdown comparator with a 130mV internal threshold and a common-mode range from ground to VIN-3V, which is grounded when unused."
      },
      {
        "number": "11",
        "name": "B OUTPUT",
        "type": "output",
        "description": "Totem-pole output B that sources or sinks up to 1.5A peak (±500mA steady-state)."
      },
      {
        "number": "12",
        "name": "GROUND",
        "type": "power_in",
        "description": "Ground pin, which must be connected to a common ground together with the other three ground pins."
      },
      {
        "number": "13",
        "name": "GROUND",
        "type": "power_in",
        "description": "Ground pin, which must be connected to a common ground together with the other three ground pins."
      },
      {
        "number": "14",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input, optimized for 7 to 40V (5 to 40V operation, 40V maximum) with an internal 5V regulator, and the whole circuit is disabled when it is low."
      },
      {
        "number": "15",
        "name": "INHIBIT REF",
        "type": "input",
        "description": "Inhibit threshold reference that can be set from 0.5 to 3.5V, and it is grounded when the inhibit circuit is unused."
      },
      {
        "number": "16",
        "name": "A INHIBIT",
        "type": "input",
        "description": "Inhibit input for output A; a diode to the opposite power switch collector keeps one output from turning on until the other has turned off, and it is left open when the inhibit circuit is unused."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 11,
        "cost_usd": 0.3569,
        "at": "2026-11-12T03:19:14"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/uc3706.pdf",
        "pages": 11,
        "sha256": "097d5f31b4732c03",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "uc3706dw.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "uc3706dw-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "62c58f4360465aa9023c08d3cbf2a260d8b766599b8604ec0890208620d7a8b0",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DW",
      "E1": {
        "nom_mm": 7.5,
        "range_mm": null
      },
      "E": {
        "nom_mm": 10.3,
        "range_mm": null
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": null
      },
      "source": "TI package designator DW (no drawing in the datasheet)",
      "model_check": {
        "file": "uc3706dw.step",
        "verdict": "SKIP",
        "reasons": [
          "the datasheet dimensions give no height or body size to compare"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}