main
Ray
Publish 0.1.0
fe1a979
UC3706DW
Texas Instruments · Gate Drivers · SOIC-16-300mil
UC3706DW from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B INHIBIT | input | Inhibit input for output B; a diode to the opposite power switch collector keeps one output from turning on until the other has turned off, and it is left open when the inhibit circuit is unused. |
| 2 | INV. INPUT | input | Inverting TTL-compatible digital input with a threshold of approximately 1.2V, no hysteresis, and a 5.5V maximum. |
| 3 | N.I. INPUT | input | Non-inverting TTL-compatible digital input with a threshold of approximately 1.2V, no hysteresis, and a 5.5V maximum. |
| 4 | GROUND | power_in | Ground pin, which must be connected to a common ground together with the other three ground pins. |
| 5 | GROUND | power_in | Ground pin, which must be connected to a common ground together with the other three ground pins. |
| 6 | A OUTPUT | output | Totem-pole output A that sources or sinks up to 1.5A peak (±500mA steady-state). |
| 7 | FLIP/FLOP | input | Grounding this pin activates the internal flip-flop to alternate the two outputs, and leaving it open makes the outputs operate simultaneously so they can be paralleled. |
| 8 | VC | power_in | Collector supply for the output stages, rated 40V maximum, and it draws no current when VIN is low. |
| 9 | STOP INV. | input | Inverting input of the analog shutdown comparator with a 130mV internal threshold, which is grounded when unused. |
| 10 | STOP NON-INV. | input | Non-inverting input of the analog shutdown comparator with a 130mV internal threshold and a common-mode range from ground to VIN-3V, which is grounded when unused. |
| 11 | B OUTPUT | output | Totem-pole output B that sources or sinks up to 1.5A peak (±500mA steady-state). |
| 12 | GROUND | power_in | Ground pin, which must be connected to a common ground together with the other three ground pins. |
| 13 | GROUND | power_in | Ground pin, which must be connected to a common ground together with the other three ground pins. |
| 14 | VIN | power_in | Supply input, optimized for 7 to 40V (5 to 40V operation, 40V maximum) with an internal 5V regulator, and the whole circuit is disabled when it is low. |
| 15 | INHIBIT REF | input | Inhibit threshold reference that can be set from 0.5 to 3.5V, and it is grounded when the inhibit circuit is unused. |
| 16 | A INHIBIT | input | Inhibit input for output A; a diode to the opposite power switch collector keeps one output from turning on until the other has turned off, and it is left open when the inhibit circuit is unused. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Motor Driver ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Supply Current | 8 | 10 | mA | VIN = 40V | 2 | ||
| VC Supply Current | 4 | 5 | mA | VC = 40V, Outputs Low | 2 | ||
| VC Leakage Current | 0.05 | 0.1 | mA | VIN = 0, VC = 30V, No Load | 2 | ||
| Digital Input Low Level | 0.8 | V | 2 | ||||
| Digital Input High Level | 2.2 | V | 2 | ||||
| Input Current | -0.6 | -1 | mA | VI = 0 | 2 | ||
| Input Leakage | 0.05 | 0.1 | mA | VI = 5V | 2 | ||
| Output High Saturation | VC-VO | 2 | V | IO = -50mA | 3 | ||
| Output Low Saturation | VO | 0.4 | V | IO = 50mA | 3 | ||
| Output Low Saturation | VO | 2.5 | V | IO = 500mA | 3 | ||
| Inhibit Threshold | VREF | 0.4 | 0.6 | V | VREF = 0.5V | 3 | |
| Inhibit Threshold | VREF | 3.3 | 3.7 | V | VREF = 3.5V | 3 | |
| Inhibit Input Current | -10 | -20 | µA | VREF = 0 | 3 | ||
| Analog Threshold (UC2706 and UC3706) | VCM | 100 | 130 | 160 | mV | VCM = 0 to 15V, for the UC2706 and UC3706 | 3 |
| Input Bias Current | -10 | -20 | µA | VCM = 0 | 3 | ||
| Thermal Shutdown | 155 | °C | 3 | ||||
| Rise Time Delay (from Inverting Input) | 110 | 130 | 140 | ns | From Inv. Input to Output | 3 | |
| 10% to 90% Rise Time (from Inverting Input) | 20 | 40 | 60 | ns | From Inv. Input to Output | 3 | |
| Fall Time Delay (from Inverting Input) | 80 | 90 | 110 | ns | From Inv. Input to Output | 3 | |
| 90% to 10% Fall Time (from Inverting Input) | 25 | 30 | 50 | ns | From Inv. Input to Output | 3 | |
| Rise Time Delay (from Noninverting Input) | 120 | 130 | 140 | ns | From N.I. Input to Output | 3 | |
| 10% to 90% Rise Time (from Noninverting Input) | 20 | 40 | 60 | ns | From N.I. Input to Output | 3 | |
| Fall Time Delay (from Noninverting Input) | 100 | 120 | 130 | ns | From N.I. Input to Output | 3 | |
| 90% to 10% Fall Time (from Noninverting Input) | 25 | 30 | 50 | ns | From N.I. Input to Output | 3 | |
| VC Cross-Conduction Current Spike Duration | 25 | ns | Output Rise | 3 | |||
| VC Cross-Conduction Current Spike Duration | 0 | ns | Output Fall | 3 | |||
| Inhibit Delay | 250 | ns | Inhibit Ref. = 1V, Inhibit Inv. = 0.5 to 1.5V | 3 | |||
| Analog Shutdown Delay | 180 | ns | Stop Non-Inv. = 0V, Stop Inv. = 0 to 0.5V | 3 | |||
| Supply Voltage | VIN | 40 | V | 2 | |||
| Collector Supply Voltage | VC | 40 | V | 2 | |||
| Output Current (Steady-State) | -500 | 500 | mA | Each output, source or sink, steady-state | 2 | ||
| Digital Inputs | 5.5 | V | 2 | ||||
| Operating Temperature Range (family rating) | TA | -55 | 125 | °C | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering) | 300 | °C | 10 seconds | 2 | |||
| Supply Voltage (recommended) | VIN | 7 | 40 | V | Circuit optimized for 7 to 40V supply | 4 | |
| Operating Temperature Range (UC3706) | TA | 0 | 70 | °C | UC3706 range per electrical characteristics header | 2 |
CAD (KiCad official)
- Symbol:
UC3706DW - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
uc3706dw-etched.step/uc3706dw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);uc3706dw.step/uc3706dw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (11 pp, sha256
097d5f31b4732c03, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# UC3706DW
**Texas Instruments** · Gate Drivers · SOIC-16-300mil
UC3706DW from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B INHIBIT | input | Inhibit input for output B; a diode to the opposite power switch collector keeps one output from turning on until the other has turned off, and it is left open when the inhibit circuit is unused. |
| 2 | INV. INPUT | input | Inverting TTL-compatible digital input with a threshold of approximately 1.2V, no hysteresis, and a 5.5V maximum. |
| 3 | N.I. INPUT | input | Non-inverting TTL-compatible digital input with a threshold of approximately 1.2V, no hysteresis, and a 5.5V maximum. |
| 4 | GROUND | power_in | Ground pin, which must be connected to a common ground together with the other three ground pins. |
| 5 | GROUND | power_in | Ground pin, which must be connected to a common ground together with the other three ground pins. |
| 6 | A OUTPUT | output | Totem-pole output A that sources or sinks up to 1.5A peak (±500mA steady-state). |
| 7 | FLIP/FLOP | input | Grounding this pin activates the internal flip-flop to alternate the two outputs, and leaving it open makes the outputs operate simultaneously so they can be paralleled. |
| 8 | VC | power_in | Collector supply for the output stages, rated 40V maximum, and it draws no current when VIN is low. |
| 9 | STOP INV. | input | Inverting input of the analog shutdown comparator with a 130mV internal threshold, which is grounded when unused. |
| 10 | STOP NON-INV. | input | Non-inverting input of the analog shutdown comparator with a 130mV internal threshold and a common-mode range from ground to VIN-3V, which is grounded when unused. |
| 11 | B OUTPUT | output | Totem-pole output B that sources or sinks up to 1.5A peak (±500mA steady-state). |
| 12 | GROUND | power_in | Ground pin, which must be connected to a common ground together with the other three ground pins. |
| 13 | GROUND | power_in | Ground pin, which must be connected to a common ground together with the other three ground pins. |
| 14 | VIN | power_in | Supply input, optimized for 7 to 40V (5 to 40V operation, 40V maximum) with an internal 5V regulator, and the whole circuit is disabled when it is low. |
| 15 | INHIBIT REF | input | Inhibit threshold reference that can be set from 0.5 to 3.5V, and it is grounded when the inhibit circuit is unused. |
| 16 | A INHIBIT | input | Inhibit input for output A; a diode to the opposite power switch collector keeps one output from turning on until the other has turned off, and it is left open when the inhibit circuit is unused. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Motor Driver ICs |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Supply Current | | | 8 | 10 | mA | VIN = 40V | 2 |
| VC Supply Current | | | 4 | 5 | mA | VC = 40V, Outputs Low | 2 |
| VC Leakage Current | | | 0.05 | 0.1 | mA | VIN = 0, VC = 30V, No Load | 2 |
| Digital Input Low Level | | | | 0.8 | V | | 2 |
| Digital Input High Level | | 2.2 | | | V | | 2 |
| Input Current | | | -0.6 | -1 | mA | VI = 0 | 2 |
| Input Leakage | | | 0.05 | 0.1 | mA | VI = 5V | 2 |
| Output High Saturation | VC-VO | | | 2 | V | IO = -50mA | 3 |
| Output Low Saturation | VO | | | 0.4 | V | IO = 50mA | 3 |
| Output Low Saturation | VO | | | 2.5 | V | IO = 500mA | 3 |
| Inhibit Threshold | VREF | 0.4 | | 0.6 | V | VREF = 0.5V | 3 |
| Inhibit Threshold | VREF | 3.3 | | 3.7 | V | VREF = 3.5V | 3 |
| Inhibit Input Current | | | -10 | -20 | µA | VREF = 0 | 3 |
| Analog Threshold (UC2706 and UC3706) | VCM | 100 | 130 | 160 | mV | VCM = 0 to 15V, for the UC2706 and UC3706 | 3 |
| Input Bias Current | | | -10 | -20 | µA | VCM = 0 | 3 |
| Thermal Shutdown | | | 155 | | °C | | 3 |
| Rise Time Delay (from Inverting Input) | | 110 | 130 | 140 | ns | From Inv. Input to Output | 3 |
| 10% to 90% Rise Time (from Inverting Input) | | 20 | 40 | 60 | ns | From Inv. Input to Output | 3 |
| Fall Time Delay (from Inverting Input) | | 80 | 90 | 110 | ns | From Inv. Input to Output | 3 |
| 90% to 10% Fall Time (from Inverting Input) | | 25 | 30 | 50 | ns | From Inv. Input to Output | 3 |
| Rise Time Delay (from Noninverting Input) | | 120 | 130 | 140 | ns | From N.I. Input to Output | 3 |
| 10% to 90% Rise Time (from Noninverting Input) | | 20 | 40 | 60 | ns | From N.I. Input to Output | 3 |
| Fall Time Delay (from Noninverting Input) | | 100 | 120 | 130 | ns | From N.I. Input to Output | 3 |
| 90% to 10% Fall Time (from Noninverting Input) | | 25 | 30 | 50 | ns | From N.I. Input to Output | 3 |
| VC Cross-Conduction Current Spike Duration | | | 25 | | ns | Output Rise | 3 |
| VC Cross-Conduction Current Spike Duration | | | 0 | | ns | Output Fall | 3 |
| Inhibit Delay | | | 250 | | ns | Inhibit Ref. = 1V, Inhibit Inv. = 0.5 to 1.5V | 3 |
| Analog Shutdown Delay | | | 180 | | ns | Stop Non-Inv. = 0V, Stop Inv. = 0 to 0.5V | 3 |
| Supply Voltage | VIN | | | 40 | V | | 2 |
| Collector Supply Voltage | VC | | | 40 | V | | 2 |
| Output Current (Steady-State) | | -500 | | 500 | mA | Each output, source or sink, steady-state | 2 |
| Digital Inputs | | | | 5.5 | V | | 2 |
| Operating Temperature Range (family rating) | TA | -55 | | 125 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature (Soldering) | | | | 300 | °C | 10 seconds | 2 |
| Supply Voltage (recommended) | VIN | 7 | | 40 | V | Circuit optimized for 7 to 40V supply | 4 |
| Operating Temperature Range (UC3706) | TA | 0 | | 70 | °C | UC3706 range per electrical characteristics header | 2 |
## CAD (KiCad official)
- Symbol: `UC3706DW`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `uc3706dw-etched.step` / `uc3706dw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `uc3706dw.step` / `uc3706dw.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/uc3706.pdf) (11 pp, sha256 `097d5f31b4732c03`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/uc3706dw-datasheet.pdf)