UC3524D

{
  "slug": "uc3524d",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "uc3524d",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "uc3524d.kicad_sym",
    "uc3524d.kicad_mod",
    "uc3524d.glb",
    "uc3524d.step",
    "uc3524d.lbr",
    "docs/hero.png",
    "docs/uc3524d-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "uc3524d-hero.glb",
    "uc3524d-hero.overlay.json"
  ],
  "component": {
    "mpn": "UC3524D",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16",
    "pin_count": 16,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/uc3524",
    "parts": {
      "symbol": "uc3524d.kicad_sym",
      "footprint": "uc3524d.kicad_mod",
      "model_3d": "uc3524d-hero.glb",
      "model_3d_plain": "uc3524d.glb",
      "model_3d_step": "uc3524d-etched.step",
      "model_3d_step_plain": "uc3524d.step",
      "lbr": "uc3524d.lbr"
    },
    "distributor_links": {
      "lcsc": "C2863447",
      "digikey": "2156-UC3524D-ND",
      "mouser": "595-UC3524D"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T16:31:32Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2156-UC3524D-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-UC3524D",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "INV INPUT",
        "type": "input",
        "description": "Inverting input of the error amplifier, which is compared against the non-inverting input and the internal reference divider network."
      },
      {
        "number": "2",
        "name": "NON INV INPUT",
        "type": "input",
        "description": "Non-inverting input of the error amplifier; the error amplifier common-mode range is 1.8 V to 3.4 V at TJ = 25°C."
      },
      {
        "number": "3",
        "name": "OSC OUT",
        "type": "output",
        "description": "Oscillator output that also serves as the output blanking pulse; it can be driven by an external clock of about 3 V with approximately 2 kΩ impedance to ground, and up to 100 pF shunt capacitance may be added to increase dead time."
      },
      {
        "number": "4",
        "name": "CL SENSE(+)",
        "type": "input",
        "description": "Non-inverting input of the current-limit comparator; the sense voltage is 200 mV typical with the error amplifier at maximum output, and the common-mode range is -1 V to 1 V."
      },
      {
        "number": "5",
        "name": "CL SENSE(-)",
        "type": "input",
        "description": "Inverting input of the current-limit comparator, used with pin 4 to sense load current; the common-mode range is -1 V to 1 V."
      },
      {
        "number": "6",
        "name": "RT",
        "type": "passive",
        "description": "Timing resistor pin that sets the oscillator charging current together with CT; practical values are 1.8 kΩ to 100 kΩ (recommended range 1.8 kΩ to 100 kΩ)."
      },
      {
        "number": "7",
        "name": "CT",
        "type": "passive",
        "description": "Timing capacitor pin that sets the oscillator ramp and blanking width; recommended value is 0.001 µF to 0.1 µF and current through the CT terminal is limited to -0.03 mA to -2 mA."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground terminal; all voltages in the datasheet are referenced to this pin."
      },
      {
        "number": "9",
        "name": "COMP",
        "type": "passive",
        "description": "Compensation node shared by the error amplifier output and the current-limit/shutdown inputs, used to set error amplifier gain or compensation."
      },
      {
        "number": "10",
        "name": "S/D",
        "type": "input",
        "description": "Shutdown input that overrides the error amplifier output through the comparator to disable the outputs."
      },
      {
        "number": "11",
        "name": "EA",
        "type": "output",
        "description": "Emitter output of output transistor A, rated for 40 V collector-emitter and 100 mA maximum collector output current."
      },
      {
        "number": "12",
        "name": "CA",
        "type": "output",
        "description": "Collector of output transistor A, rated at 40 V collector-emitter and 100 mA maximum collector output current."
      },
      {
        "number": "13",
        "name": "CB",
        "type": "output",
        "description": "Collector of output transistor B, rated at 40 V collector-emitter and 100 mA maximum collector output current."
      },
      {
        "number": "14",
        "name": "EB",
        "type": "output",
        "description": "Emitter output of output transistor B, rated for 40 V collector-emitter and 100 mA maximum collector output current."
      },
      {
        "number": "15",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply voltage input, 8 V to 40 V recommended, with 40 V absolute maximum referenced to pin 8."
      },
      {
        "number": "16",
        "name": "VREF",
        "type": "power_out",
        "description": "5 V reference output, recommended to source 0 mA to 20 mA (50 mA absolute maximum)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The connection diagram text extraction is garbled. Pin assignments were reconstructed from the conne; The UC3524D is the narrow-body D package, but the text only contains the DW0016A package drawing (wi; Pin descriptions for pins 1, 2, 4, 5, 9, 10 and 11-14 are inferred from function labels and the sect"
        ],
        "pages_sent": 18,
        "cost_usd": 0.079,
        "at": "2026-10-08T16:31:10"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/uc3524",
        "pages": 18,
        "sha256": "42407e137f08653a",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "uc3524d.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "uc3524d-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4e72c338b1a84769771e0a3aebb17b8a6121de1ea498f66362cdf95abcc63a4f",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}