component
UC2856QDWRQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
uc2856qdwrq1: specified limits as data (metadata.characteristics, 60 rows from the datasheet)
2 files changed
+795−1
README.md+67@@ -34,6 +34,73 @@ UC2856QDWRQ1 from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descrip | Category | Power Management (PMIC) | | Pins | 16 | +## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Output voltage | | 5.05 | 5.1 | 5.15 | V | IO = 1 mA, TJ = 25°C | 3 |+| Line regulation voltage | | | | 20 | mV | VIN = 8 V to 40 V | 3 |+| Load regulation voltage | | | | 15 | mV | IO = –1 mA to –10 mA | 3 |+| Total output variation | | 5 | | 5.2 | V | Over line, load, and temperature | 3 |+| Output noise voltage | | | | 50 | µV | f = 10 Hz to 10 kHz, TJ = 25°C | 3 |+| Long term stability | | 5 | | 25 | mV | 1000 hours, TJ = 25°C | 3 |+| Short circuit current | | -25 | -45 | -65 | mA | VREF = 0 V | 3 |+| Initial accuracy (oscillator frequency) | | 180 | 200 | 220 | kHz | TJ = 25°C | 3 |+| Initial accuracy (oscillator frequency, full range) | | 170 | | 230 | kHz | TJ = Full range | 3 |+| Voltage stability | | | | 2 | % | VIN = 8 V to 40 V | 3 |+| Discharge current | | 7.5 | 8 | 8.8 | mA | VCT = 2 V, TJ = 25°C | 3 |+| Discharge current | | 6.7 | 8 | 8.8 | mA | VCT = 2 V | 3 |+| Sync output high level voltage | | 2.4 | | 3.6 | V | IO = –1 mA | 3 |+| Sync output low level voltage | | 0.2 | | 0.4 | V | IO = 1 mA | 3 |+| Sync input high level voltage | | 2 | | | V | CT = 0 V, RT = VREF | 3 |+| Sync input low level voltage | | | | 0.8 | V | CT = 0 V, RT = VREF | 3 |+| Sync input current | | 1 | | 10 | µA | CT = 0 V, RT = VREF, VSYNC = 5 V | 3 |+| Sync delay to outputs | | 50 | | 100 | ns | CT = 0 V RT = VREF, VSYNC = 0.8 V to 2 V | 3 |+| Input offset voltage (error amplifier) | | | | 5 | mV | VCM = 2 V | 4 |+| Input bias current (error amplifier) | | -1 | | | µA | | 4 |+| Input offset current (error amplifier) | | | | 500 | nA | | 4 |+| Common mode range (error amplifier) | | 0 | | | V | VIN = 8 V to 40 V; upper limit printed as VIN–2 V | 4 |+| Open loop gain | | 80 | | 100 | dB | VO = 1.2 V to 3 V | 4 |+| Unity gain bandwidth | | 1 | | 1.5 | MHz | TJ = 25°C | 4 |+| CMRR (error amplifier) | | 75 | | 100 | dB | VCM = 0 V to 38 V, VIN = 40 V | 4 |+| PSRR (error amplifier) | | 80 | | 100 | dB | VIN = 8 V to 40 V | 4 |+| Output sink current (error amplifier) | | 5 | | 10 | mA | VID = –15 mV, VCOMP = 1.2 V | 4 |+| Output source current (error amplifier) | | -0.4 | | -0.5 | mA | VID = 15 mV, VCOMP = 2.5 V | 4 |+| High-level output voltage (error amplifier) | | 4.3 | 4.6 | 4.9 | V | VID = 50 mV, RL (COMP) = 15 kΩ | 4 |+| Low-level output voltage (error amplifier) | | 0.7 | | 1 | V | VID = –50 mV, RL (COMP) = 15 kΩ | 4 |+| Amplifier gain (current sense) | | 2.5 | 2.75 | 3 | V/V | VCS– = 0 V, CL SS open | 4 |+| Maximum differential input signal (current sense) | | 1.1 | | 1.2 | V | CL SS open, RL (COMP) = 15 kΩ | 4 |+| Input offset voltage (current sense) | | 5 | | 35 | mV | VCL SS = 0.5 V, COMP open | 4 |+| CMRR (current sense) | | 60 | | | dB | VCM = 0 V to 3 V | 4 |+| PSRR (current sense) | | 60 | | | dB | VIN = 8 V to 40 V | 4 |+| Input bias current (current sense) | | -1 | | 1 | µA | VCL SS = 0.5 V, COMP open | 4 |+| Input offset current (current sense) | | -1 | | 1 | µA | VCL SS = 0.5 V, COMP open | 4 |+| Input common mode range (current sense) | | 0 | | 3 | V | | 4 |+| Delay to outputs (current sense) | | 120 | | 250 | ns | VEA+ = VREF, EA– = 0 V, CS+ – CS– = 0 V to 1.5 V | 4 |+| Current limit offset | | 0.4 | 0.5 | 0.6 | V | VCS– = 0 V, VCS+ = 0 V, COMP open | 4 |+| Input bias current (current limit adjust) | | -10 | | -30 | µA | VEA+ = VREF, VEA– = 0 V | 4 |+| Threshold voltage (SHUTDOWN) | | 0.95 | 1 | 1.05 | V | | 4 |+| Input voltage range (SHUTDOWN) | | 0 | | 5 | V | | 4 |+| Minimum latching current (ICL SS) | | 3 | | | mA | Footnote 5: current into CL SS assured to latch circuit into shutdown state | 4 |+| Maximum non-latching current (ICL SS) | | | | 0.8 | mA | Footnote 6: current into CL SS assured not to latch circuit into shutdown state | 4 |+| Delay to outputs (SHUTDOWN) | | 65 | | 110 | ns | VSHUTDOWN = 0 V to 1.3 V | 4 |+| Collector-emitter voltage | | | | 40 | V | | 5 |+| Off-state bias current | | | | 250 | µA | VC = 40 V | 5 |+| Output low level voltage | | 0.1 | | 0.5 | V | IOUT = 20 mA | 5 |+| Output low level voltage | | 0.5 | | 2.6 | V | IOUT = 200 mA | 5 |+| Output high level voltage | | 12.5 | | 13.2 | V | IOUT = –20 mA | 5 |+| Output high level voltage | | 12 | | 13.1 | V | IOUT = –200 mA | 5 |+| Rise time | | 40 | | 80 | ns | C1 = 1 nF | 5 |+| Fall time | | 40 | | 80 | ns | C1 = 1 nF | 5 |+| UVLO low saturation voltage | | 0.8 | | 1.5 | V | VIN = 0 V, IOUT = 20 mA | 5 |+| Maximum duty cycle | | 45 | 47 | 50 | % | | 5 |+| Minimum duty cycle | | 0 | | | % | | 5 |+| Startup threshold (UVLO) | | 7.7 | | 8 | V | | 5 |+| Threshold hysteresis (UVLO) | | | | 0.7 | V | | 5 |+| Supply current | | 18 | | 23 | mA | Total standby current | 5 |+ ## CAD (KiCad official) - Symbol: `UC2856QDWRQ1`
page.json+728−1@@ -228,6 +228,733 @@ "Package": "SOIC-16-300mil", "Category": "Power Management (PMIC)", "Pins": "16"+ },+ "characteristics": {+ "version": 1,+ "source": "datasheet",+ "datasheet_sha256": "51576f2bd2b22621",+ "rows": [+ {+ "name": "Output voltage",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 5.05,+ "typ": 5.1,+ "max": 5.15,+ "conditions": "IO = 1 mA, TJ = 25°C",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Line regulation voltage",+ "symbol": "",+ "kind": "electrical",+ "unit": "mV",+ "min": null,+ "typ": null,+ "max": 20,+ "conditions": "VIN = 8 V to 40 V",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Load regulation voltage",+ "symbol": "",+ "kind": "electrical",+ "unit": "mV",+ "min": null,+ "typ": null,+ "max": 15,+ "conditions": "IO = –1 mA to –10 mA",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Total output variation",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 5,+ "typ": null,+ "max": 5.2,+ "conditions": "Over line, load, and temperature",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Output noise voltage",+ "symbol": "",+ "kind": "electrical",+ "unit": "µV",+ "min": null,+ "typ": null,+ "max": 50,+ "conditions": "f = 10 Hz to 10 kHz, TJ = 25°C",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Long term stability",+ "symbol": "",+ "kind": "electrical",+ "unit": "mV",+ "min": 5,+ "typ": null,+ "max": 25,+ "conditions": "1000 hours, TJ = 25°C",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Short circuit current",+ "symbol": "",+ "kind": "electrical",+ "unit": "mA",+ "min": -25,+ "typ": -45,+ "max": -65,+ "conditions": "VREF = 0 V",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Initial accuracy (oscillator frequency)",+ "symbol": "",+ "kind": "electrical",+ "unit": "kHz",+ "min": 180,+ "typ": 200,+ "max": 220,+ "conditions": "TJ = 25°C",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Initial accuracy (oscillator frequency, full range)",+ "symbol": "",+ "kind": "electrical",+ "unit": "kHz",+ "min": 170,+ "typ": null,+ "max": 230,+ "conditions": "TJ = Full range",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Voltage stability",+ "symbol": "",+ "kind": "electrical",+ "unit": "%",+ "min": null,+ "typ": null,+ "max": 2,+ "conditions": "VIN = 8 V to 40 V",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Discharge current",+ "symbol": "",+ "kind": "electrical",+ "unit": "mA",+ "min": 7.5,+ "typ": 8,+ "max": 8.8,+ "conditions": "VCT = 2 V, TJ = 25°C",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Discharge current",+ "symbol": "",+ "kind": "electrical",+ "unit": "mA",+ "min": 6.7,+ "typ": 8,+ "max": 8.8,+ "conditions": "VCT = 2 V",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Sync output high level voltage",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 2.4,+ "typ": null,+ "max": 3.6,+ "conditions": "IO = –1 mA",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Sync output low level voltage",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 0.2,+ "typ": null,+ "max": 0.4,+ "conditions": "IO = 1 mA",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Sync input high level voltage",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 2,+ "typ": null,+ "max": null,+ "conditions": "CT = 0 V, RT = VREF",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Sync input low level voltage",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": 0.8,+ "conditions": "CT = 0 V, RT = VREF",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Sync input current",+ "symbol": "",+ "kind": "electrical",+ "unit": "µA",+ "min": 1,+ "typ": null,+ "max": 10,+ "conditions": "CT = 0 V, RT = VREF, VSYNC = 5 V",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Sync delay to outputs",+ "symbol": "",+ "kind": "electrical",+ "unit": "ns",+ "min": 50,+ "typ": null,+ "max": 100,+ "conditions": "CT = 0 V RT = VREF, VSYNC = 0.8 V to 2 V",+ "source_page": 3,+ "source": "datasheet"+ },+ {+ "name": "Input offset voltage (error amplifier)",+ "symbol": "",+ "kind": "electrical",+ "unit": "mV",+ "min": null,+ "typ": null,+ "max": 5,+ "conditions": "VCM = 2 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Input bias current (error amplifier)",+ "symbol": "",+ "kind": "electrical",+ "unit": "µA",+ "min": -1,+ "typ": null,+ "max": null,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Input offset current (error amplifier)",+ "symbol": "",+ "kind": "electrical",+ "unit": "nA",+ "min": null,+ "typ": null,+ "max": 500,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Common mode range (error amplifier)",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 0,+ "typ": null,+ "max": null,+ "conditions": "VIN = 8 V to 40 V; upper limit printed as VIN–2 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Open loop gain",+ "symbol": "",+ "kind": "electrical",+ "unit": "dB",+ "min": 80,+ "typ": null,+ "max": 100,+ "conditions": "VO = 1.2 V to 3 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Unity gain bandwidth",+ "symbol": "",+ "kind": "electrical",+ "unit": "MHz",+ "min": 1,+ "typ": null,+ "max": 1.5,+ "conditions": "TJ = 25°C",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "CMRR (error amplifier)",+ "symbol": "",+ "kind": "electrical",+ "unit": "dB",+ "min": 75,+ "typ": null,+ "max": 100,+ "conditions": "VCM = 0 V to 38 V, VIN = 40 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "PSRR (error amplifier)",+ "symbol": "",+ "kind": "electrical",+ "unit": "dB",+ "min": 80,+ "typ": null,+ "max": 100,+ "conditions": "VIN = 8 V to 40 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Output sink current (error amplifier)",+ "symbol": "",+ "kind": "electrical",+ "unit": "mA",+ "min": 5,+ "typ": null,+ "max": 10,+ "conditions": "VID = –15 mV, VCOMP = 1.2 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Output source current (error amplifier)",+ "symbol": "",+ "kind": "electrical",+ "unit": "mA",+ "min": -0.4,+ "typ": null,+ "max": -0.5,+ "conditions": "VID = 15 mV, VCOMP = 2.5 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "High-level output voltage (error amplifier)",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 4.3,+ "typ": 4.6,+ "max": 4.9,+ "conditions": "VID = 50 mV, RL (COMP) = 15 kΩ",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Low-level output voltage (error amplifier)",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 0.7,+ "typ": null,+ "max": 1,+ "conditions": "VID = –50 mV, RL (COMP) = 15 kΩ",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Amplifier gain (current sense)",+ "symbol": "",+ "kind": "electrical",+ "unit": "V/V",+ "min": 2.5,+ "typ": 2.75,+ "max": 3,+ "conditions": "VCS– = 0 V, CL SS open",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Maximum differential input signal (current sense)",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 1.1,+ "typ": null,+ "max": 1.2,+ "conditions": "CL SS open, RL (COMP) = 15 kΩ",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Input offset voltage (current sense)",+ "symbol": "",+ "kind": "electrical",+ "unit": "mV",+ "min": 5,+ "typ": null,+ "max": 35,+ "conditions": "VCL SS = 0.5 V, COMP open",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "CMRR (current sense)",+ "symbol": "",+ "kind": "electrical",+ "unit": "dB",+ "min": 60,+ "typ": null,+ "max": null,+ "conditions": "VCM = 0 V to 3 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "PSRR (current sense)",+ "symbol": "",+ "kind": "electrical",+ "unit": "dB",+ "min": 60,+ "typ": null,+ "max": null,+ "conditions": "VIN = 8 V to 40 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Input bias current (current sense)",+ "symbol": "",+ "kind": "electrical",+ "unit": "µA",+ "min": -1,+ "typ": null,+ "max": 1,+ "conditions": "VCL SS = 0.5 V, COMP open",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Input offset current (current sense)",+ "symbol": "",+ "kind": "electrical",+ "unit": "µA",+ "min": -1,+ "typ": null,+ "max": 1,+ "conditions": "VCL SS = 0.5 V, COMP open",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Input common mode range (current sense)",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 0,+ "typ": null,+ "max": 3,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Delay to outputs (current sense)",+ "symbol": "",+ "kind": "electrical",+ "unit": "ns",+ "min": 120,+ "typ": null,+ "max": 250,+ "conditions": "VEA+ = VREF, EA– = 0 V, CS+ – CS– = 0 V to 1.5 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Current limit offset",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 0.4,+ "typ": 0.5,+ "max": 0.6,+ "conditions": "VCS– = 0 V, VCS+ = 0 V, COMP open",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Input bias current (current limit adjust)",+ "symbol": "",+ "kind": "electrical",+ "unit": "µA",+ "min": -10,+ "typ": null,+ "max": -30,+ "conditions": "VEA+ = VREF, VEA– = 0 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Threshold voltage (SHUTDOWN)",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 0.95,+ "typ": 1,+ "max": 1.05,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Input voltage range (SHUTDOWN)",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 0,+ "typ": null,+ "max": 5,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Minimum latching current (ICL SS)",+ "symbol": "",+ "kind": "electrical",+ "unit": "mA",+ "min": 3,+ "typ": null,+ "max": null,+ "conditions": "Footnote 5: current into CL SS assured to latch circuit into shutdown state",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Maximum non-latching current (ICL SS)",+ "symbol": "",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 0.8,+ "conditions": "Footnote 6: current into CL SS assured not to latch circuit into shutdown state",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Delay to outputs (SHUTDOWN)",+ "symbol": "",+ "kind": "electrical",+ "unit": "ns",+ "min": 65,+ "typ": null,+ "max": 110,+ "conditions": "VSHUTDOWN = 0 V to 1.3 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Collector-emitter voltage",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": 40,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Off-state bias current",+ "symbol": "",+ "kind": "electrical",+ "unit": "µA",+ "min": null,+ "typ": null,+ "max": 250,+ "conditions": "VC = 40 V",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Output low level voltage",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 0.1,+ "typ": null,+ "max": 0.5,+ "conditions": "IOUT = 20 mA",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Output low level voltage",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 0.5,+ "typ": null,+ "max": 2.6,+ "conditions": "IOUT = 200 mA",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Output high level voltage",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 12.5,+ "typ": null,+ "max": 13.2,+ "conditions": "IOUT = –20 mA",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Output high level voltage",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 12,+ "typ": null,+ "max": 13.1,+ "conditions": "IOUT = –200 mA",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Rise time",+ "symbol": "",+ "kind": "electrical",+ "unit": "ns",+ "min": 40,+ "typ": null,+ "max": 80,+ "conditions": "C1 = 1 nF",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Fall time",+ "symbol": "",+ "kind": "electrical",+ "unit": "ns",+ "min": 40,+ "typ": null,+ "max": 80,+ "conditions": "C1 = 1 nF",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "UVLO low saturation voltage",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 0.8,+ "typ": null,+ "max": 1.5,+ "conditions": "VIN = 0 V, IOUT = 20 mA",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Maximum duty cycle",+ "symbol": "",+ "kind": "electrical",+ "unit": "%",+ "min": 45,+ "typ": 47,+ "max": 50,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Minimum duty cycle",+ "symbol": "",+ "kind": "electrical",+ "unit": "%",+ "min": 0,+ "typ": null,+ "max": null,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Startup threshold (UVLO)",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 7.7,+ "typ": null,+ "max": 8,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Threshold hysteresis (UVLO)",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": 0.7,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Supply current",+ "symbol": "",+ "kind": "electrical",+ "unit": "mA",+ "min": 18,+ "typ": null,+ "max": 23,+ "conditions": "Total standby current",+ "source_page": 5,+ "source": "datasheet"+ }+ ] } }, "variants": [],@@ -269,4 +996,4 @@ "visibility": { "public": true }-}+}