Generated by kicad-footprint-generator · KiCad file format 20260206
UC282TDTR-ADJ
Texas Instruments · Linear Voltage Regulators (LDO) · TO-263-5
UC282TDTR-ADJ from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VB | power_in | VB supplies power to all circuits of the regulator except the collector of the output-power transistor, and the 2-V headroom from VB to VOUT allows a Darlington output stage; the VB absolute maximum is 13 V. |
| 2 | VIN | power_in | VIN supplies current only to the collector of the output-power transistor, with a maximum dropout of 450 mV at 3 A for TJ = 0°C to 100°C, and the VIN absolute maximum is 7.5 V. |
| 3 | GND | power_in | The GND pin should be referenced to the load ground for accurate results, and the package tab is also ground. |
| 4 | ADJ | input | In the adjustable version the output is programmed by two external 0.1% resistors that should satisfy R3 |
| 5 | VOUT | power_out | VOUT should be connected to the load through a low-impedance path avoiding significant inductance and resistance, with an output voltage absolute range of 1.2 V to 6.0 V. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| ADJ voltage (IVOUT = 100 mA), UC282-ADJ | 1.176 | 1.2 | 1.212 | V | IVOUT = 100 mA | 4 | |
| VIN PSSR | 80 | 100 | dB | VOUT programmed for 2.5 V | 4 | ||
| VB PSSR | 50 | 60 | dB | VOUT programmed for 2.5 V | 4 | ||
| Load regulation | 0.5 | 4 | mV | IVOUT = 10 mA to 3 A | 4 | ||
| VIN dropout voltage (VIN-VOUT), TJ = 25 C | 350 | 425 | mV | IVOUT = 3 A, TJ = 25 C | 4 | ||
| VIN dropout voltage (VIN-VOUT), UC282-ADJ | 350 | 500 | mV | IVOUT = 3 A, UC282-ADJ | 4 | ||
| VB dropout (VB-VOUT), UC282-ADJ | 1.8 | 2.2 | V | IVOUT = 3 A, UC282-ADJ | 4 | ||
| Short circuit current limit | 3.3 | 4.5 | A | 4 | |||
| VB current | 6 | 11 | mA | IVOUT = 10 mA | 4 | ||
| VB current | 18 | 60 | mA | IVOUT = 3 A | 4 | ||
| VIN current | 2.94 | 2.97 | A | IVOUT = 3 A | 4 | ||
| VB supply voltage | VB | 13 | V | 2 | |||
| VIN supply voltage | VIN | 7.5 | V | 2 | |||
| Output voltage | 1.2 | 6 | V | 2 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 2 | ||
| Junction temperature | TJ | -55 | 150 | °C | 2 | ||
| Lead temperature (soldering) | 300 | °C | 10 seconds soldering | 2 | |||
| Operating free-air temperature (UC282 series) | TA | -40 | 100 | °C | UC282-X series | 2 |
CAD (KiCad official)
- Symbol:
UC282TDTR-ADJ - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
uc282tdtr-adj-etched.step/uc282tdtr-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);uc282tdtr-adj.step/uc282tdtr-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (18 pp, sha256
7b55cff937ef3199, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).