main
Ray uc2825dwtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 98d8f83
{
  "schema_version": 1,
  "type": "component",
  "slug": "uc2825dwtr",
  "title": "UC2825DWTR",
  "brief": "Texas Instruments DC-DC Converters, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "uc2825dwtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "UC2825DWTR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/uc2825",
    "parts": {
      "symbol": "uc2825dwtr.kicad_sym",
      "footprint": "uc2825dwtr.kicad_mod",
      "model_3d": "uc2825dwtr-etched.glb",
      "model_3d_plain": "uc2825dwtr.glb",
      "model_3d_step": "uc2825dwtr-etched.step",
      "model_3d_step_plain": "uc2825dwtr.step",
      "lbr": "uc2825dwtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2869566"
    },
    "pins": [
      {
        "number": "1",
        "name": "INV",
        "type": "input",
        "description": "Inverting input of the error amplifier; absolute maximum analog input range -0.3V to 7V."
      },
      {
        "number": "2",
        "name": "NI",
        "type": "input",
        "description": "Non-inverting input of the error amplifier; absolute maximum analog input range -0.3V to 7V."
      },
      {
        "number": "3",
        "name": "E/A Out",
        "type": "output",
        "description": "Error amplifier output used with external compensation network; output current limited to 5mA max, sink current 1-2.5mA and source current -0.5 to -1.3mA typical."
      },
      {
        "number": "4",
        "name": "Clock",
        "type": "bidirectional",
        "description": "Oscillator clock output pin, also used for synchronizing multiple devices; clock output current limited to -5mA max, clock high 3.9-4.5V and low 2.3-2.9V typical."
      },
      {
        "number": "5",
        "name": "RT",
        "type": "passive",
        "description": "Oscillator timing pin; external resistor to ground sets the oscillator charging current (rated -5mA max) and, with CT, the switching frequency; analog input range -0.3V to 7V."
      },
      {
        "number": "6",
        "name": "CT",
        "type": "passive",
        "description": "Oscillator timing capacitor pin; external capacitor to ground sets switching frequency together with RT, ramp valley 1.0V and peak 2.8V typical; analog input range -0.3V to 6V."
      },
      {
        "number": "7",
        "name": "Ramp",
        "type": "input",
        "description": "PWM comparator ramp input for voltage-mode ramp or current-mode current-sense signal; bias current -5µA max; analog input range -0.3V to 7V."
      },
      {
        "number": "8",
        "name": "Soft Start",
        "type": "passive",
        "description": "Soft-start and maximum duty-cycle clamp pin; charges with 3-20µA typical current and can sink up to 20mA (discharge 1mA) to reset; analog input range -0.3V to 6V."
      },
      {
        "number": "9",
        "name": "ILIM/SD",
        "type": "input",
        "description": "Current-limit/shutdown input; pulse-by-pulse current-limit threshold 1.0V typical and TTL-compatible shutdown threshold 1.40V typical; analog input range -0.3V to 6V."
      },
      {
        "number": "10",
        "name": "Gnd",
        "type": "power_in",
        "description": "Signal ground reference for the low-power control circuitry, separate from the power ground return."
      },
      {
        "number": "11",
        "name": "Out A",
        "type": "output",
        "description": "Totem-pole output A capable of sourcing/sinking 0.5A DC (2A peak, 0.5µs pulse) to drive a power MOSFET gate; high level 13.0-13.5V typical."
      },
      {
        "number": "12",
        "name": "Pwr Gnd",
        "type": "power_in",
        "description": "Power ground return for the output driver stage, kept separate from signal ground to isolate switching noise."
      },
      {
        "number": "13",
        "name": "VC",
        "type": "power_in",
        "description": "Supply voltage for the output totem-pole drivers, rated up to 30V absolute maximum; should be locally bypassed."
      },
      {
        "number": "14",
        "name": "Out B",
        "type": "output",
        "description": "Totem-pole output B capable of sourcing/sinking 0.5A DC (2A peak, 0.5µs pulse) to drive a power MOSFET gate; high level 13.0-13.5V typical."
      },
      {
        "number": "15",
        "name": "VCC",
        "type": "power_in",
        "description": "Main chip supply voltage, rated up to 30V absolute maximum; UVLO start threshold 9.2V typical with 0.8V hysteresis, start-up current 1.1mA typical."
      },
      {
        "number": "16",
        "name": "VREF",
        "type": "power_out",
        "description": "5.1V (5.00-5.20V typical) reference output capable of sourcing at least 10mA with short-circuit current of -15 to -100mA, used to bias external circuitry."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 15 (Pwr Gnd) labeling ambiguity: The table labels this as 'Pwr Gnd' (Power Ground), but the abso; Pin 10 (Soft Start) functional verification needed: The table lists Pin 10 as 'Soft Start', but elec; Missing explicit VCC pin identification in the 16-pin pinout: Standard PWM controller designs includ"
        ],
        "pages_sent": 23,
        "cost_usd": 0.332,
        "at": "2026-09-23T18:25:54"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/uc2825",
        "pages": 23,
        "sha256": "62f4a96c2122b13d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "uc2825dwtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "uc2825dwtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "57bf169f11fa4706ff479a4ab6a426e91a0d272150343361082eaeddc88861c9",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOIC-16-300mil",
      "Category": "Power Management (PMIC)",
      "Pins": "16"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "uc2825dwtr"
  ],
  "discovery_pitch": "UC2825DWTR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "uc2825dwtr.kicad_sym",
    "uc2825dwtr.kicad_mod",
    "uc2825dwtr.glb",
    "uc2825dwtr.step",
    "uc2825dwtr.lbr",
    "docs/hero.png",
    "docs/uc2825dwtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T13:27:00.118Z"
}