UAA2016PG

{
  "slug": "uaa2016pg",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi AC-DC Controllers And Regulators, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "uaa2016pg",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "uaa2016pg.kicad_sym",
    "uaa2016pg.kicad_mod",
    "uaa2016pg.glb",
    "uaa2016pg.step",
    "uaa2016pg.lbr",
    "docs/hero.png",
    "docs/uaa2016pg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "uaa2016pg-hero.glb",
    "uaa2016pg-hero.overlay.json",
    "uaa2016pg-etched.glb"
  ],
  "component": {
    "mpn": "UAA2016PG",
    "manufacturer": "onsemi",
    "package": "PDIP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588929204528828416",
    "parts": {
      "symbol": "uaa2016pg.kicad_sym",
      "footprint": "uaa2016pg.kicad_mod",
      "model_3d": "uaa2016pg-hero.glb",
      "model_3d_plain": "uaa2016pg-etched.glb",
      "model_3d_step": "uaa2016pg-etched.step",
      "model_3d_step_plain": "uaa2016pg.step",
      "lbr": "uaa2016pg.lbr"
    },
    "distributor_links": {
      "lcsc": "C897236",
      "digikey": "UAA2016PGOS-ND",
      "mouser": "863-UAA2016PG"
    },
    "distributor_check": {
      "checked_at": "2026-10-16T15:26:13Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "UAA2016PGOS-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "863-UAA2016PG",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Vref",
        "type": "power_out",
        "description": "Internal voltage reference output, typically -5.5 V (range -6.5 V to -4.5 V) referenced to Pin 7, and it can sink a maximum of 1.0 mA."
      },
      {
        "number": "2",
        "name": "Hys. Adj.",
        "type": "input",
        "description": "Hysteresis adjust input, where leaving it open gives about 10 mV internal hysteresis and connecting it to VCC gives up to 5°C; its voltage must stay between 0 and Vref."
      },
      {
        "number": "3",
        "name": "Sensor",
        "type": "input",
        "description": "Sense input to the comparator from the NTC divider, with a maximum sensor input bias current of 0.1 µA and a voltage limited to 0 to Vref."
      },
      {
        "number": "4",
        "name": "Temp. Reduc.",
        "type": "input",
        "description": "Temperature reduction input, where a resistor R1 between this pin and VCC sets the reduction level (350 mV corresponds to 5°C), and its voltage must stay between 0 and Vref."
      },
      {
        "number": "5",
        "name": "VEE",
        "type": "power_in",
        "description": "Negative supply pin from the integrated shunt regulator, which provides VEE of -8.6 V with respect to Pin 7 and has a maximum supply current of 15 mA; the pulse amplifier sinks output current into this pin."
      },
      {
        "number": "6",
        "name": "Output",
        "type": "output",
        "description": "Triac gate pulse output that sinks current pulses to VEE, with a maximum pulse current of 150 mA (pulse width under 400 µs) and a minimum of 70 mA, with the output-limiting resistor Rout setting amplitude."
      },
      {
        "number": "7",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply pin and the reference point for all maximum-rating voltages in this device."
      },
      {
        "number": "8",
        "name": "Sync",
        "type": "input",
        "description": "AC synchronization input whose resistor Rsync sets the output pulse width, with a maximum synchronization current of 3.0 mA."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: KiCad type classes for the regulated reference (Pin 1), the shunt-regulated negative supply (Pin 5),; Pin numbers were assigned from the text-extracted Top View pin-connection block (names listed as Vre; The datasheet's PDIP-8 package outline lists pin 1 through 8 with no pin-name table; the pin descrip"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0859,
        "at": "2026-10-16T15:25:59"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588929204528828416",
        "pages": 13,
        "sha256": "09d8a1b2090f9115",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "uaa2016pg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "uaa2016pg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "05ccd1e3b6e843d8d2de32453a5ed3df598d3c058cfc056391a1f40bd96e1b77",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}