main
Ray
Publish 0.1.0
010b1b3
U1DQ
YANGJIE(扬杰) · IC · SOD-123
U1DQ from YANGJIE(扬杰), in a SOD-123. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode, the end marked by the cathode line on the package; blocks up to VRRM 200 V (U1DQ) and conducts 1.0 A average forward current. |
| 2 | A | passive | Anode, the end opposite the cathode line; forward voltage is 0.92 V max at IF=1.0A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | YANGJIE(扬杰) |
| Package | SOD-123 |
| Category | |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Repetitive Peak Reverse Voltage | VRRM | 200 | V | 1 | |||
| Maximum RMS Voltage | VRMS | 140 | V | 1 | |||
| Maximum DC blocking Voltage | VDC | 200 | V | 1 | |||
| Average rectified output current | IO | 1 | A | @60Hz sine wave, Resistance load, TL (Fig.1) | 1 | ||
| Forward Surge Current (Non-repetitive) | IFSM | 30 | A | @60Hz Half-sine wave, 1 cycle, TJ=25℃ | 1 | ||
| Current squared time | I2t | 3.735 | A2s | @1ms≤t≤8.3ms TJ=25℃ | 1 | ||
| Storage temperature | Tstg | -55 | 150 | ℃ | 1 | ||
| Junction temperature | TJ | -55 | 150 | ℃ | 1 | ||
| Maximum instantaneous forward voltage | VF | 0.92 | V | IF=1.0A | 2 | ||
| Maximum reverse recovery time | TRR | 25 | ns | IF=0.5A, IR=1.0A, Irr=0.25A | 2 | ||
| Maximum DC reverse current at rated DC blocking voltage per diode | IR | 2 | μA | @ VRM=VRRM, TJ=25℃ | 2 | ||
| Maximum DC reverse current at rated DC blocking voltage per diode | IR | 20 | μA | @ VRM=VRRM, TJ=125℃ | 2 | ||
| Typical junction capacitance | CJ | 15 | pF | VR=4V, f=1MHz | 2 | ||
| Typical reverse recovery time | TRR | 25 | ns | TJ=25℃, IF=1A, di/dt=-50A/us, VRM=30V | 2 | ||
| Typical reverse recovery time | TRR | 18 | ns | TJ=25℃, IF=1A, di/dt=-200A/us, VRM=100V | 2 | ||
| Typical reverse recovery time | TRR | 24 | ns | TJ=125℃ | 2 | ||
| Typical peak recovery current | IRRM | 2.4 | A | TJ=25℃ | 2 | ||
| Typical peak recovery current | IRRM | 4 | A | TJ=125℃ | 2 | ||
| Typical reverse recovery charge | Qrr | 20 | nC | TJ=25℃ | 2 | ||
| Typical reverse recovery charge | Qrr | 45 | nC | TJ=125℃ | 2 | ||
| Typical thermal resistance, junction to ambient | RθJ-A | 65 | ℃/W | Junction to ambient mounted on PCB with 3mm*3mm copper pad areas (Note 1) | 2 | ||
| Typical thermal resistance, junction to lead | RθJ-L | 25 | ℃/W | Junction to lead mounted on PCB with 3mm*3mm copper pad areas (Note 1) | 2 | ||
| Typical thermal resistance, junction to case | RθJ-C | 20 | ℃/W | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | black | 4. Body color: Black | 4 | |
| contacts | tin | ● Terminals: Tin plated leads, solderable per J-STD-002 and JESD22-B102 | 1 |
CAD (KiCad official)
- Symbol:
U1DQ - Footprint:
Diode_SMD:D_SOD-123F - 3D model: SOD-123 (KiCad packages3D, STEP)
- 3D model files:
u1dq-etched.step/u1dq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);u1dq.step/u1dq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: YANGJIE(扬杰) datasheet (6 pp, sha256
2415548ac87b5ed4, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# U1DQ
**YANGJIE(扬杰)** · IC · SOD-123
U1DQ from YANGJIE(扬杰), in a SOD-123. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode, the end marked by the cathode line on the package; blocks up to VRRM 200 V (U1DQ) and conducts 1.0 A average forward current. |
| 2 | A | passive | Anode, the end opposite the cathode line; forward voltage is 0.92 V max at IF=1.0A. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | YANGJIE(扬杰) |
| Package | SOD-123 |
| Category | |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Repetitive Peak Reverse Voltage | VRRM | | | 200 | V | | 1 |
| Maximum RMS Voltage | VRMS | | | 140 | V | | 1 |
| Maximum DC blocking Voltage | VDC | | | 200 | V | | 1 |
| Average rectified output current | IO | | | 1 | A | @60Hz sine wave, Resistance load, TL (Fig.1) | 1 |
| Forward Surge Current (Non-repetitive) | IFSM | | | 30 | A | @60Hz Half-sine wave, 1 cycle, TJ=25℃ | 1 |
| Current squared time | I2t | | | 3.735 | A2s | @1ms≤t≤8.3ms TJ=25℃ | 1 |
| Storage temperature | Tstg | -55 | | 150 | ℃ | | 1 |
| Junction temperature | TJ | -55 | | 150 | ℃ | | 1 |
| Maximum instantaneous forward voltage | VF | | | 0.92 | V | IF=1.0A | 2 |
| Maximum reverse recovery time | TRR | | | 25 | ns | IF=0.5A, IR=1.0A, Irr=0.25A | 2 |
| Maximum DC reverse current at rated DC blocking voltage per diode | IR | | | 2 | μA | @ VRM=VRRM, TJ=25℃ | 2 |
| Maximum DC reverse current at rated DC blocking voltage per diode | IR | | | 20 | μA | @ VRM=VRRM, TJ=125℃ | 2 |
| Typical junction capacitance | CJ | | 15 | | pF | VR=4V, f=1MHz | 2 |
| Typical reverse recovery time | TRR | | 25 | | ns | TJ=25℃, IF=1A, di/dt=-50A/us, VRM=30V | 2 |
| Typical reverse recovery time | TRR | | 18 | | ns | TJ=25℃, IF=1A, di/dt=-200A/us, VRM=100V | 2 |
| Typical reverse recovery time | TRR | | 24 | | ns | TJ=125℃ | 2 |
| Typical peak recovery current | IRRM | | 2.4 | | A | TJ=25℃ | 2 |
| Typical peak recovery current | IRRM | | 4 | | A | TJ=125℃ | 2 |
| Typical reverse recovery charge | Qrr | | 20 | | nC | TJ=25℃ | 2 |
| Typical reverse recovery charge | Qrr | | 45 | | nC | TJ=125℃ | 2 |
| Typical thermal resistance, junction to ambient | RθJ-A | | 65 | | ℃/W | Junction to ambient mounted on PCB with 3mm*3mm copper pad areas (Note 1) | 2 |
| Typical thermal resistance, junction to lead | RθJ-L | | 25 | | ℃/W | Junction to lead mounted on PCB with 3mm*3mm copper pad areas (Note 1) | 2 |
| Typical thermal resistance, junction to case | RθJ-C | | 20 | | ℃/W | | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | | black | 4. Body color: Black | 4 |
| contacts | | tin | ● Terminals: Tin plated leads, solderable per J-STD-002 and JESD22-B102 | 1 |
## CAD (KiCad official)
- Symbol: `U1DQ`
- Footprint: `Diode_SMD:D_SOD-123F`
- 3D model: SOD-123 (KiCad packages3D, STEP)
- 3D model files: `u1dq-etched.step` / `u1dq-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `u1dq.step` / `u1dq.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [YANGJIE(扬杰) datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604430106576236544) (6 pp, sha256 `2415548ac87b5ed4`, retrieved 2026-10-30, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/u1dq-datasheet.pdf)