Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TVS0701DRBR

Texas Instruments · Surge Protection Devices (SPDs) · SON-8(3x3)

TVS0701DRBR from Texas Instruments, in a SON-8(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN passive Surge protected channel, shorted with pins 2, 3 and 4; bidirectional clamp with ±7 V standoff (VRWM) and 11 V typical clamp at 30 A 8/20 µs surge.
2 IN passive Surge protected channel, shorted with pins 1, 3 and 4; bidirectional clamp with ±7 V standoff (VRWM) and 11 V typical clamp at 30 A 8/20 µs surge.
3 IN passive Surge protected channel, shorted with pins 1, 2 and 4; bidirectional clamp with ±7 V standoff (VRWM) and 11 V typical clamp at 30 A 8/20 µs surge.
4 IN passive Surge protected channel, shorted with pins 1, 2 and 3; bidirectional clamp with ±7 V standoff (VRWM) and 11 V typical clamp at 30 A 8/20 µs surge.
5 GND power_in Ground, shorted with pins 6, 7 and 8.
6 GND power_in Ground, shorted with pins 5, 7 and 8.
7 GND power_in Ground, shorted with pins 5, 6 and 8.
8 GND power_in Ground, shorted with pins 5, 6 and 7.
9 FLOAT unconnected Exposed thermal pad that must be left floating, not grounded, because grounding it impedes the operating range and can cause failures at negative applied voltage.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SON-8(3x3)
Category Circuit Protection
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Leakage Current ILEAK 0.25 40 nA Measured at VIN = ±VRWM, TA = 27°C 6
Leakage Current ILEAK 200 nA Measured at VIN = ±VRWM, TA = 85°C 6
Break-down Voltage VBR 9.3 10 V IIN = ±1mA 6
Clamp Voltage VCLAMP 11 11.7 V ±Ipp IEC 61000-4-5 Surge (8/20 µs), VIN = 0 V before surge, TA = 27°C 6
Clamp Voltage VCLAMP 12.9 V ±IPP IEC 61000-4-5 Surge (8/20 µs), VIN =±VRWM before surge, TA = 125°C 6
8/20 µs surge dynamic resistance RDYN 120 mΩ Calculated from VCLAMP at .5*IPP and IPP surge current, TA = 25°C 6
Input pin capacitance CIN 77 pF VIN = VRWM, f = 1 MHz, 30 mVpp, IO to GND 6
Maximum Slew Rate SR 2.5 V/µs 0-±VRWM rising edge, sweep rise time and measure slew rate when IPEAK = 1 mA, TA = 27°C 6
Maximum Slew Rate SR 1 V/µs 0-±VRWM rising edge, sweep rise time and measure slew rate when IPEAK = 1 mA, TA = 85°C 6
Reverse Stand-Off Voltage VRWM -7 7 V over operating free-air temperature range 5
IEC 61000-4-5 Surge Current (8/20 µs) -30 30 A TA < 125°C 5
IEC 61000-4-5 Surge Power (8/20 µs) 360 W TA = 27°C 5
IEC 61643-321 Surge Current (10/1000 µs) -15 15 A TA = 27°C 5
IEC 61643-321 Surge Power (10/1000 µs) 150 W TA = 27°C 5
IEC 61000-4-4 EFT Protection EFT -80 80 A TA = 27°C 5
DC Current IBR 80 mA TA = 27°C 5
Ambient Operating Temperature TA -40 125 °C TA = 27°C 5
Storage Temperature Tstg -65 150 °C TA = 27°C 5
ESD HBM V(ESD) -2000 2000 V Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins 5
ESD CDM V(ESD) -500 500 V Charged device model (CDM), per JEDEC specification JESD22-C101, all pins 5
ESD IEC 61000-4-2 contact discharge V(ESD) -8 8 kV IEC 61000-4-2 contact discharge 5
ESD IEC 61000-4-2 air-gap discharge V(ESD) -15 15 kV IEC 61000-4-2 air-gap discharge 5
Junction-to-ambient thermal resistance RθJA 52 °C/W DRB (SON), 8 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 56.1 °C/W DRB (SON), 8 pins 5
Junction-to-board thermal resistance RθJB 24.9 °C/W DRB (SON), 8 pins 5
Junction-to-top characterization parameter ΨJT 2.1 °C/W DRB (SON), 8 pins 5
Junction-to-board characterization parameter ΨJB 24.9 °C/W DRB (SON), 8 pins 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 9.8 °C/W DRB (SON), 8 pins 5

CAD (KiCad official)

  • Symbol: TVS0701DRBR
  • Footprint: Package_DFN_QFN:Texas_DRB0008A
  • 3D model: SON-8(3x3), generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.0 mm tall, given). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tvs0701drbr-etched.step / tvs0701drbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tvs0701drbr.step / tvs0701drbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (21 pp, sha256 c0f32f3164bd012b, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0). Land: footprint: KiCad Texas_DRB0008A, checked against datasheet pitch/pin count/body/ep/drawing (outline drawing DRB0008A; pitch 0.65 mm; body 3.0 x 3.0 mm; 8 terminals; exposed pad 1.75 x 1.5 mm, p.18).

Datasheet PDF