component

TUSB321RWBR

Public Made by Adom

by adom

Texas Instruments Specialized, X2-QFN-12(1.6x1.6). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentinterfacetusb321rwbrboard-derived

Verified TUSB321RWBR

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 2 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against TI's TUSB321 datasheet (SLLSEO6C, revised August 2018)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: the page already carries TI's current edition (SLLSEO6C, June 2015, revised August 2018; sha256 ef1cea96d1e85a98 matches ti.com/lit/ds/symlink/tusb321.pdf fetched 2026-10-27); edition now recorded
  • ✓All 12 pins match the Pin Functions table and the RWB 12-pin X2QFN top view (p.3) by number and name: CC1, CC2, CURRENT_MODE, PORT, VBUS_DET, VCONN_FAULT (printed with an overbar in both the drawing and the table, kept as ~{VCONN_FAULT}), OUT1, OUT2, ID, GND, DIR, VDD; no renames needed
  • ✓Pin types agree with the table: CC1/CC2 I/O -> bidirectional, CURRENT_MODE/PORT/VBUS_DET I -> input, VCONN_FAULT/ID/DIR O (open drain) -> open_collector, GND G and VDD P -> power_in
  • •OUT1 and OUT2 are typed I/O in the table but described there as open-drain outputs for the UFP current-mode result; kept open_collector
  • ✓All 12 descriptions rewritten to the table wording (p.3); the earlier text added values not in the pin table (5.1 kΩ, 887 kΩ, 95 kΩ, 200 mA, 7-13 µs, VOL, VCONN FET RON, 4.5-5.5 V)
  • ✓Footprint vs RWB0012A (p.22-23): 12 pads, e = 0.40 mm, in the same orientation as TI's land pattern example: pins 1/2 on the left (1 upper), 3-6 along the bottom, 7/8 on the right (8 upper), 9-12 along the top (12 top-left). Pads 1/2/7/8 0.85 x 0.20 at x = ±0.725, y = ±0.20 (TI 0.7 x 0.2 at ±0.65, 2X 0.4); pads 3-6/9-12 0.20 x 0.65 at y = ±0.825 (TI 0.2 x 0.5 at ±0.75); same inner edges as TI's land, 0.15 longer outward; pad width 0.20 against b 0.15-0.25; no exposed pad
  • •The p.3 pinout figure is drawn rotated 90 degrees from the package drawing and land pattern (pins 1/2 on the top edge there); both are top views numbered counterclockwise, so the numbering agrees
  • ✓3D body 1.60 x 1.60 x 0.40 mm against 1.55-1.65 x 1.55-1.65, 0.4 max (p.22); seated on z = 0, centred on the pads; in the matching GLB the pin-1 dot is at the top-left corner and the two-terminal sides are left/right, the same orientation as the footprint (the square body cannot show a 90-degree error in a bounding box)
  • ✓DigiKey 296-42400-2-ND (tape and reel; DigiKey product URL names TUSB321RWBR) and Mouser 595-TUSB321RWBR kept and added to specs
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Texas Instruments)
Verified files✓ tusb321rwbr.kicad_sym✓ tusb321rwbr.kicad_mod✓ tusb321rwbr.step
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓12 of 12 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! tusb321rwbr.kicad_sym! tusb321rwbr.kicad_mod✓ tusb321rwbr.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
← Commit history

Update component metadata

Caleb ·7ab022a975 ·20d ago ·parent dbd0114
1 file changed +16−16
page.json+16−16
page.json+16−16
@@ -20,7 +20,7 @@     "pin_count": 12,     "category": "Interface",     "subcategory": "Specialized",-    "datasheet": "https://www.ti.com/cn/lit/gpn/tusb321",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tusb321.pdf",     "parts": {       "symbol": "tusb321rwbr.kicad_sym",       "footprint": "tusb321rwbr.kicad_mod",@@ -49,73 +49,73 @@         "number": "1",         "name": "CC1",         "type": "bidirectional",-        "description": "Type-C configuration channel signal 1. Connects to the CC1 pin of the USB Type-C receptacle for attach/detach detection, cable orientation detection, and current-mode advertisement. Absolute max rating -0.3 V to 6 V. [datasheet p.3]"+        "description": "USB Type-C Configuration Channel signal 1. Internal pull-ups/pull-downs (Rp or Rd ≈ 5.1 kΩ) select DFP/UFP role and detect cable attach, orientation, and advertised current. [datasheet p.3]"       },       {         "number": "2",         "name": "CC2",         "type": "bidirectional",-        "description": "Type-C configuration channel signal 2. Connects to the CC2 pin of the USB Type-C receptacle for attach/detach detection, cable orientation detection, and current-mode advertisement. Absolute max rating -0.3 V to 6 V. [datasheet p.3]"+        "description": "USB Type-C Configuration Channel signal 2. Mirror of CC1 for the other CC line in the Type-C receptacle; used together with CC1 to determine plug orientation. [datasheet p.3]"       },       {         "number": "3",         "name": "CURRENT_MODE",         "type": "input",-        "description": "Tri-level input that advertises VBUS current capability in DFP or source-DRP mode. L = Default (pull-down to GND or leave unconnected); M = Medium 1.5 A (pull-up to VDD via 500-kΩ resistor); H = High 3.0 A (pull-up to VDD via 10-kΩ resistor). VDD must be ≥3.5 V to advertise 3 A. [datasheet p.3]"+        "description": "Tri-level input that selects advertised VBUS current when in DFP or DRP-as-source mode. L = default USB current (pull-down or GND); M = 1.5 A (pull-up to VDD via 500 kΩ); H = 3.0 A (pull-up to VDD via 10 kΩ). VDD must be ≥ 3.5 V to advertise 3 A. [datasheet p.3]"       },       {         "number": "4",         "name": "PORT",         "type": "input",-        "description": "Tri-level port-mode select input, sampled when VDD becomes active. H = DFP (pull-up to VDD); NC = DRP (leave open or tie via 4.7 kΩ); L = UFP (pull-down or tie to GND). Internal R_pu ≈ 588 kΩ, R_pd ≈ 1.1 MΩ. [datasheet p.3]"+        "description": "Tri-level input that selects port mode, sampled when VDD becomes active. H = DFP (pull-up to VDD), NC = DRP (leave floating), L = UFP (tie to GND). [datasheet p.3]"       },       {         "number": "5",         "name": "VBUS_DET",         "type": "input",-        "description": "VBUS detection input, 5 V to 28 V input range (abs max -0.3 V to 4 V at the pin). VBUS detection determines UFP attachment. One external R_VBUS resistor is required between system VBUS and this pin; threshold on the pin ≤4 V. [datasheet p.3]"+        "description": "VBUS detection input, 5–28 V nominal (absolute max 4 V on the pin itself — a large external resistor R_VBUS ≈ 887 kΩ is required between system VBUS and this pin). Internal 95 kΩ pulldown forms a divider; the VBUS_THR threshold is ~3.3 V at the pin and determines UFP attach. [datasheet p.3]"       },       {         "number": "6",         "name": "~{VCONN_FAULT}",         "type": "open_collector",-        "description": "Active-low open-drain fault output. Asserted low for t_FAULT when a VCONN over-current fault is detected. Requires external pull-up (typ. 200 kΩ) to VDD. [datasheet p.3]"+        "description": "Active-low open-drain output asserted for t_FAULT (7–13 µs) when a VCONN over-current condition (>200 mA) is detected on the active-cable VCONN power FET. Requires an external pull-up (R_ODext ≈ 200 kΩ). [datasheet p.3]"       },       {         "number": "7",         "name": "OUT1",         "type": "open_collector",-        "description": "Open-drain output that communicates the detected Type-C source current mode while in UFP mode. Default or Medium current = H, High current = L (in combination with OUT2). Requires external pull-up to VDD. [datasheet p.3]"+        "description": "Open-drain output communicating the detected Type-C source current advertisement when in UFP mode. H = default current detected, L = medium or high current detected. Requires external pull-up (~200 kΩ). [datasheet p.3]"       },       {         "number": "8",         "name": "OUT2",         "type": "open_collector",-        "description": "Open-drain output that communicates the detected Type-C source current mode while in UFP mode. Default = H, Medium or High current = L (in combination with OUT1). Requires external pull-up to VDD. [datasheet p.3]"+        "description": "Open-drain output communicating the detected Type-C source current advertisement when in UFP mode. H = default or medium current detected, L = high current detected. Requires external pull-up (~200 kΩ). [datasheet p.3]"       },       {         "number": "9",         "name": "ID",         "type": "open_collector",-        "description": "Open-drain output asserted low when the CC pins detect device attachment while the port is a source (DFP, or DRP acting as DFP). Requires external pull-up to VDD. [datasheet p.3]"+        "description": "Open-drain output asserted low when the CC pins detect device attachment while the port is acting as a source (DFP, or DRP acting as source). Requires an external pull-up (~200 kΩ). [datasheet p.3]"       },       {         "number": "10",         "name": "GND",         "type": "power_in",-        "description": "Device ground reference. [datasheet p.3]"+        "description": "Device ground return. [datasheet p.3]"       },       {         "number": "11",         "name": "DIR",         "type": "open_collector",-        "description": "Open-drain plug orientation output. H = Type-C plug position 2; L = Type-C plug position 1. Used to drive an external USB SuperSpeed mux. Requires external pull-up to VDD. [datasheet p.3]"+        "description": "Open-drain plug-orientation output. H = Type-C plug position 2, L = Type-C plug position 1. Drives external USB SuperSpeed mux. VOL ≤ 0.4 V at 1.6 mA; requires external pull-up (~200 kΩ). [datasheet p.3]"       },       {         "number": "12",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply voltage input, 4.5 V to 5.5 V operating range (abs max 6 V). VDD must be ≥3.5 V in order to advertise 3-A current. [datasheet p.3]"+        "description": "Positive supply voltage, 4.5–5.5 V (nominal 5 V). Low current consumption (~100 µA active/unattached). Also feeds the VCONN power FET (R_ON ≈ 1.25 Ω) used to power active cables; requires 10–200 µF bulk capacitance on VCONN/VDD. [datasheet p.3]"       }     ],     "provenance": {@@ -125,10 +125,10 @@         "at": "2026-10-08"       },       "datasheet": {-        "url": "https://www.ti.com/cn/lit/gpn/tusb321",+        "url": "https://www.ti.com/lit/ds/symlink/tusb321.pdf",         "pages": 25,-        "sha256": "2364f607a44bfce696894d9fe58d1afb38f53650b50f734bacf94f1a474450ef",-        "source_tier": "lcsc"+        "sha256": "ef1cea96d1e85a985410e1316a6b52381cf50a482681dbb91da9a9920025305e",+        "source_tier": "mfr"       },       "cad": "Footprint, symbol and 3D model as used on Adom board designs; the 3D model was extracted from the board STEP export",       "pins": {