main
Ray
Publish 0.1.0
2c76c7a
TUSB2046BIRHBT
Texas Instruments · USB Converters · VQFN-32-EP(5x5)
TUSB2046BIRHBT from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DP0 | bidirectional | Root port USB differential data plus, paired with DM0 to form the upstream USB port. |
| 2 | DM0 | bidirectional | Root port USB differential data minus, paired with DP0 to form the upstream USB port. |
| 3 | VCC | power_in | 3.3-V supply voltage; recommended range is 3 V to 3.6 V for TUSB2046B and 3.3 V to 3.6 V for TUSB2046BI/TUSB2046I. |
| 4 | RESET | input | Active-low TTL input with hysteresis that must be asserted at power-up; a pulse of 100 µs to 1 ms is recommended after VCC reaches 90%, and the clock must be active during the last 60 µs of the reset window. |
| 5 | EECLK | tri_state | EEPROM serial clock output with a 100-µA internal pulldown, active only when EXTMEM is low; it must be left floating when EXTMEM is high. |
| 6 | EEDATA/GANGED | bidirectional | With EXTMEM high it selects ganged or per-port overcurrent detection; with EXTMEM low it is EEPROM serial data I/O with a 100-µA internal pulldown, and it must not change dynamically during operation. |
| 7 | GND | power_in | Ground; must be tied to ground for proper operation. |
| 8 | BUSPWR | input | Power source indicator that must be pulled to 3.3 V for bus-powered mode or pulled low for self-powered mode, and must not change dynamically during operation. |
| 9 | PWRON1 | output | Active-low push-pull power-on/off control for downstream port 1; the external power switch must accept 3.3-V inputs because the output cannot drive 5-V signals. |
| 10 | OVRCUR1 | input | Active-low overcurrent input with noise filtering for downstream port 1; in ganged mode all OVRCUR terminals must be tied together. |
| 11 | DM1 | bidirectional | Downstream port 1 USB differential data minus, paired with DP1. |
| 12 | DP1 | bidirectional | Downstream port 1 USB differential data plus, paired with DM1. |
| 13 | PWRON2 | output | Active-low push-pull power-on/off control for downstream port 2; the external power switch must accept 3.3-V inputs because the output cannot drive 5-V signals. |
| 14 | OVRCUR2 | input | Active-low overcurrent input with noise filtering for downstream port 2; in ganged mode all OVRCUR terminals must be tied together. |
| 15 | DM2 | bidirectional | Downstream port 2 USB differential data minus, paired with DP2. |
| 16 | DP2 | bidirectional | Downstream port 2 USB differential data plus, paired with DM2. |
| 17 | PWRON3 | output | Active-low push-pull power-on/off control for downstream port 3; the external power switch must accept 3.3-V inputs because the output cannot drive 5-V signals. |
| 18 | OVRCUR3 | input | Active-low overcurrent input with noise filtering for downstream port 3; in ganged mode all OVRCUR terminals must be tied together. |
| 19 | DM3 | bidirectional | Downstream port 3 USB differential data minus, paired with DP3. |
| 20 | DP3 | bidirectional | Downstream port 3 USB differential data plus, paired with DM3. |
| 21 | PWRON4 | output | Active-low push-pull power-on/off control for downstream port 4; the external power switch must accept 3.3-V inputs because the output cannot drive 5-V signals. |
| 22 | OVRCUR4 | input | Active-low overcurrent input with noise filtering for downstream port 4; in ganged mode all OVRCUR terminals must be tied together. |
| 23 | DM4 | bidirectional | Downstream port 4 USB differential data minus, paired with DP4. |
| 24 | DP4 | bidirectional | Downstream port 4 USB differential data plus, paired with DM4. |
| 25 | VCC | power_in | 3.3-V supply voltage; same supply net as pin 3. |
| 26 | EXTMEM | input | When high, disables the serial EEPROM interface; when low, pins 5 and 6 become the EEPROM clock and data terminals. |
| 27 | TSTPLL/48MCLK | bidirectional | Production test terminal that must be tied to ground for 6-MHz operation, or driven by a 48-MHz clock source (no crystal) for 48-MHz operation. |
| 28 | GND | power_in | Ground; must be tied to ground for proper operation. |
| 29 | XTAL2 | output | 6-MHz crystal output; this terminal must be left open when an oscillator drives XTAL1. |
| 30 | XTAL1 | input | 6-MHz crystal input with 50% duty cycle; the internal PLL generates the 48-MHz and 12-MHz clocks used by the ASIC logic. |
| 31 | TSTMODE | input | Test/mode input that must be tied to ground for 6-MHz operation or to 3.3-V VCC for 48-MHz operation. |
| 32 | SUSPND | output | Active-high suspend status output that is high during suspend mode and low during normal operation. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32-EP(5x5) |
| Category | Interface |
| Pins | 33 |
CAD (KiCad official)
- Symbol:
TUSB2046BIRHBT - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
tusb2046birhbt-etched.step/tusb2046birhbt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tusb2046birhbt.step/tusb2046birhbt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
eaa20027fc3dde2d, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TUSB2046BIRHBT
**Texas Instruments** · USB Converters · VQFN-32-EP(5x5)
TUSB2046BIRHBT from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DP0 | bidirectional | Root port USB differential data plus, paired with DM0 to form the upstream USB port. |
| 2 | DM0 | bidirectional | Root port USB differential data minus, paired with DP0 to form the upstream USB port. |
| 3 | VCC | power_in | 3.3-V supply voltage; recommended range is 3 V to 3.6 V for TUSB2046B and 3.3 V to 3.6 V for TUSB2046BI/TUSB2046I. |
| 4 | RESET | input | Active-low TTL input with hysteresis that must be asserted at power-up; a pulse of 100 µs to 1 ms is recommended after VCC reaches 90%, and the clock must be active during the last 60 µs of the reset window. |
| 5 | EECLK | tri_state | EEPROM serial clock output with a 100-µA internal pulldown, active only when EXTMEM is low; it must be left floating when EXTMEM is high. |
| 6 | EEDATA/GANGED | bidirectional | With EXTMEM high it selects ganged or per-port overcurrent detection; with EXTMEM low it is EEPROM serial data I/O with a 100-µA internal pulldown, and it must not change dynamically during operation. |
| 7 | GND | power_in | Ground; must be tied to ground for proper operation. |
| 8 | BUSPWR | input | Power source indicator that must be pulled to 3.3 V for bus-powered mode or pulled low for self-powered mode, and must not change dynamically during operation. |
| 9 | PWRON1 | output | Active-low push-pull power-on/off control for downstream port 1; the external power switch must accept 3.3-V inputs because the output cannot drive 5-V signals. |
| 10 | OVRCUR1 | input | Active-low overcurrent input with noise filtering for downstream port 1; in ganged mode all OVRCUR terminals must be tied together. |
| 11 | DM1 | bidirectional | Downstream port 1 USB differential data minus, paired with DP1. |
| 12 | DP1 | bidirectional | Downstream port 1 USB differential data plus, paired with DM1. |
| 13 | PWRON2 | output | Active-low push-pull power-on/off control for downstream port 2; the external power switch must accept 3.3-V inputs because the output cannot drive 5-V signals. |
| 14 | OVRCUR2 | input | Active-low overcurrent input with noise filtering for downstream port 2; in ganged mode all OVRCUR terminals must be tied together. |
| 15 | DM2 | bidirectional | Downstream port 2 USB differential data minus, paired with DP2. |
| 16 | DP2 | bidirectional | Downstream port 2 USB differential data plus, paired with DM2. |
| 17 | PWRON3 | output | Active-low push-pull power-on/off control for downstream port 3; the external power switch must accept 3.3-V inputs because the output cannot drive 5-V signals. |
| 18 | OVRCUR3 | input | Active-low overcurrent input with noise filtering for downstream port 3; in ganged mode all OVRCUR terminals must be tied together. |
| 19 | DM3 | bidirectional | Downstream port 3 USB differential data minus, paired with DP3. |
| 20 | DP3 | bidirectional | Downstream port 3 USB differential data plus, paired with DM3. |
| 21 | PWRON4 | output | Active-low push-pull power-on/off control for downstream port 4; the external power switch must accept 3.3-V inputs because the output cannot drive 5-V signals. |
| 22 | OVRCUR4 | input | Active-low overcurrent input with noise filtering for downstream port 4; in ganged mode all OVRCUR terminals must be tied together. |
| 23 | DM4 | bidirectional | Downstream port 4 USB differential data minus, paired with DP4. |
| 24 | DP4 | bidirectional | Downstream port 4 USB differential data plus, paired with DM4. |
| 25 | VCC | power_in | 3.3-V supply voltage; same supply net as pin 3. |
| 26 | EXTMEM | input | When high, disables the serial EEPROM interface; when low, pins 5 and 6 become the EEPROM clock and data terminals. |
| 27 | TSTPLL/48MCLK | bidirectional | Production test terminal that must be tied to ground for 6-MHz operation, or driven by a 48-MHz clock source (no crystal) for 48-MHz operation. |
| 28 | GND | power_in | Ground; must be tied to ground for proper operation. |
| 29 | XTAL2 | output | 6-MHz crystal output; this terminal must be left open when an oscillator drives XTAL1. |
| 30 | XTAL1 | input | 6-MHz crystal input with 50% duty cycle; the internal PLL generates the 48-MHz and 12-MHz clocks used by the ASIC logic. |
| 31 | TSTMODE | input | Test/mode input that must be tied to ground for 6-MHz operation or to 3.3-V VCC for 48-MHz operation. |
| 32 | SUSPND | output | Active-high suspend status output that is high during suspend mode and low during normal operation. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32-EP(5x5) |
| Category | Interface |
| Pins | 33 |
## CAD (KiCad official)
- Symbol: `TUSB2046BIRHBT`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `tusb2046birhbt-etched.step` / `tusb2046birhbt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tusb2046birhbt.step` / `tusb2046birhbt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tusb2046b) (33 pp, sha256 `eaa20027fc3dde2d`, retrieved 2026-10-11, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tusb2046birhbt-datasheet.pdf)