← Commit history
README.mdadded+69@@ -0,0 +1,69 @@+# TUSB2046BIRHBR++**Texas Instruments** · USB Converters · VQFN-32-EP(5x5)++TUSB2046BIRHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DP0 | bidirectional | Root port USB differential data plus, paired with DM0 for upstream USB port, common-mode input 0.8 V to 2.5 V. |+| 2 | DM0 | bidirectional | Root port USB differential data minus, paired with DP0 for upstream USB port, common-mode input 0.8 V to 2.5 V. |+| 3 | VCC | power_in | 3.3 V supply voltage, recommended operating range 3.0 V to 3.6 V. |+| 4 | RESET | input | Active low TTL input with hysteresis; requires 100 μs to 1 ms pulse width at power-up, clock must be active during final 60 μs. |+| 5 | EECLK | output | EEPROM serial clock output with 100 μA internal pulldown when EXTMEM low, disabled when EXTMEM high. |+| 6 | EEDATA/GANGED | bidirectional | EEPROM serial data I/O with 100 μA internal pulldown when EXTMEM low, ganged mode indicator when EXTMEM high. |+| 7 | GND | power_in | Ground terminal. |+| 8 | BUSPWR | input | Active high power mode indicator; high for bus-powered or low for self-powered mode, must not change dynamically. |+| 9 | PWRON1 | output | Active low push-pull power control output for downstream port 1, 4 mA drive capability. |+| 10 | OVRCUR1 | input | Active low overcurrent input for downstream port 1 with noise filtering logic. |+| 11 | DM1 | bidirectional | Downstream port 1 USB differential data minus, paired with DP1, common-mode input 0.8 V to 2.5 V. |+| 12 | DP1 | bidirectional | Downstream port 1 USB differential data plus, paired with DM1, common-mode input 0.8 V to 2.5 V. |+| 13 | PWRON2 | output | Active low push-pull power control output for downstream port 2, 4 mA drive capability. |+| 14 | OVRCUR2 | input | Active low overcurrent input for downstream port 2 with noise filtering logic. |+| 15 | DM2 | bidirectional | Downstream port 2 USB differential data minus, paired with DP2, common-mode input 0.8 V to 2.5 V. |+| 16 | DP2 | bidirectional | Downstream port 2 USB differential data plus, paired with DM2, common-mode input 0.8 V to 2.5 V. |+| 17 | PWRON3 | output | Active low push-pull power control output for downstream port 3, 4 mA drive capability. |+| 18 | OVRCUR3 | input | Active low overcurrent input for downstream port 3 with noise filtering logic. |+| 19 | DM3 | bidirectional | Downstream port 3 USB differential data minus, paired with DP3, common-mode input 0.8 V to 2.5 V. |+| 20 | DP3 | bidirectional | Downstream port 3 USB differential data plus, paired with DP3, common-mode input 0.8 V to 2.5 V. |+| 21 | PWRON4 | output | Active low push-pull power control output for downstream port 4, 4 mA drive capability. |+| 22 | OVRCUR4 | input | Active low overcurrent input for downstream port 4 with noise filtering logic. |+| 23 | DM4 | bidirectional | Downstream port 4 USB differential data minus, paired with DP4, common-mode input 0.8 V to 2.5 V. |+| 24 | DP4 | bidirectional | Downstream port 4 USB differential data plus, paired with DP4, common-mode input 0.8 V to 2.5 V. |+| 25 | VCC | power_in | 3.3 V supply voltage, recommended operating range 3.0 V to 3.6 V. |+| 26 | EXTMEM | input | EEPROM interface control input; high disables interface, low enables pins 5-6 as serial interface, must not change during operation. |+| 27 | TSTPLL/48MCLK | bidirectional | Test terminal or 48 MHz clock input; tie to ground for 6 MHz crystal mode or connect 48 MHz clock source. |+| 28 | GND | power_in | Ground terminal. |+| 29 | XTAL2 | output | 6 MHz crystal output, must be left open when using external oscillator. |+| 30 | XTAL1 | input | 6 MHz crystal input with 50% duty cycle; internal PLL generates 48 MHz and 12 MHz clocks. |+| 31 | TSTMODE | input | Test/mode control input; tie to ground for 6 MHz or to 3.3 V for 48 MHz operation, must not change during normal operation. |+| 32 | SUSPND | output | Active high suspend status output; high during suspend mode, low during normal operation. |+| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-32-EP(5x5) |+| Category | Interface |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `TUSB2046BIRHBR`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `tusb2046birhbr-etched.step` / `tusb2046birhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tusb2046birhbr.step` / `tusb2046birhbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tusb2046b) (33 pp, sha256 `eaa20027fc3dde2d`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tusb2046birhbr-datasheet.pdf)
page.jsonadded+294@@ -0,0 +1,294 @@+{+ "slug": "tusb2046birhbr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments USB Converters, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "tusb2046birhbr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tusb2046birhbr.kicad_sym",+ "tusb2046birhbr.kicad_mod",+ "tusb2046birhbr.glb",+ "tusb2046birhbr.step",+ "tusb2046birhbr.lbr",+ "docs/hero.png",+ "docs/tusb2046birhbr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TUSB2046BIRHBR",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-32-EP(5x5)",+ "pin_count": 33,+ "category": "Interface",+ "subcategory": "USB Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tusb2046b",+ "parts": {+ "symbol": "tusb2046birhbr.kicad_sym",+ "footprint": "tusb2046birhbr.kicad_mod",+ "model_3d": "tusb2046birhbr-etched.glb",+ "model_3d_plain": "tusb2046birhbr.glb",+ "model_3d_step": "tusb2046birhbr-etched.step",+ "model_3d_step_plain": "tusb2046birhbr.step",+ "lbr": "tusb2046birhbr.lbr"+ },+ "distributor_links": {+ "lcsc": "C702367"+ },+ "pins": [+ {+ "number": "1",+ "name": "DP0",+ "type": "bidirectional",+ "description": "Root port USB differential data plus, paired with DM0 for upstream USB port, common-mode input 0.8 V to 2.5 V."+ },+ {+ "number": "2",+ "name": "DM0",+ "type": "bidirectional",+ "description": "Root port USB differential data minus, paired with DP0 for upstream USB port, common-mode input 0.8 V to 2.5 V."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_in",+ "description": "3.3 V supply voltage, recommended operating range 3.0 V to 3.6 V."+ },+ {+ "number": "4",+ "name": "RESET",+ "type": "input",+ "description": "Active low TTL input with hysteresis; requires 100 μs to 1 ms pulse width at power-up, clock must be active during final 60 μs."+ },+ {+ "number": "5",+ "name": "EECLK",+ "type": "output",+ "description": "EEPROM serial clock output with 100 μA internal pulldown when EXTMEM low, disabled when EXTMEM high."+ },+ {+ "number": "6",+ "name": "EEDATA/GANGED",+ "type": "bidirectional",+ "description": "EEPROM serial data I/O with 100 μA internal pulldown when EXTMEM low, ganged mode indicator when EXTMEM high."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground terminal."+ },+ {+ "number": "8",+ "name": "BUSPWR",+ "type": "input",+ "description": "Active high power mode indicator; high for bus-powered or low for self-powered mode, must not change dynamically."+ },+ {+ "number": "9",+ "name": "PWRON1",+ "type": "output",+ "description": "Active low push-pull power control output for downstream port 1, 4 mA drive capability."+ },+ {+ "number": "10",+ "name": "OVRCUR1",+ "type": "input",+ "description": "Active low overcurrent input for downstream port 1 with noise filtering logic."+ },+ {+ "number": "11",+ "name": "DM1",+ "type": "bidirectional",+ "description": "Downstream port 1 USB differential data minus, paired with DP1, common-mode input 0.8 V to 2.5 V."+ },+ {+ "number": "12",+ "name": "DP1",+ "type": "bidirectional",+ "description": "Downstream port 1 USB differential data plus, paired with DM1, common-mode input 0.8 V to 2.5 V."+ },+ {+ "number": "13",+ "name": "PWRON2",+ "type": "output",+ "description": "Active low push-pull power control output for downstream port 2, 4 mA drive capability."+ },+ {+ "number": "14",+ "name": "OVRCUR2",+ "type": "input",+ "description": "Active low overcurrent input for downstream port 2 with noise filtering logic."+ },+ {+ "number": "15",+ "name": "DM2",+ "type": "bidirectional",+ "description": "Downstream port 2 USB differential data minus, paired with DP2, common-mode input 0.8 V to 2.5 V."+ },+ {+ "number": "16",+ "name": "DP2",+ "type": "bidirectional",+ "description": "Downstream port 2 USB differential data plus, paired with DM2, common-mode input 0.8 V to 2.5 V."+ },+ {+ "number": "17",+ "name": "PWRON3",+ "type": "output",+ "description": "Active low push-pull power control output for downstream port 3, 4 mA drive capability."+ },+ {+ "number": "18",+ "name": "OVRCUR3",+ "type": "input",+ "description": "Active low overcurrent input for downstream port 3 with noise filtering logic."+ },+ {+ "number": "19",+ "name": "DM3",+ "type": "bidirectional",+ "description": "Downstream port 3 USB differential data minus, paired with DP3, common-mode input 0.8 V to 2.5 V."+ },+ {+ "number": "20",+ "name": "DP3",+ "type": "bidirectional",+ "description": "Downstream port 3 USB differential data plus, paired with DP3, common-mode input 0.8 V to 2.5 V."+ },+ {+ "number": "21",+ "name": "PWRON4",+ "type": "output",+ "description": "Active low push-pull power control output for downstream port 4, 4 mA drive capability."+ },+ {+ "number": "22",+ "name": "OVRCUR4",+ "type": "input",+ "description": "Active low overcurrent input for downstream port 4 with noise filtering logic."+ },+ {+ "number": "23",+ "name": "DM4",+ "type": "bidirectional",+ "description": "Downstream port 4 USB differential data minus, paired with DP4, common-mode input 0.8 V to 2.5 V."+ },+ {+ "number": "24",+ "name": "DP4",+ "type": "bidirectional",+ "description": "Downstream port 4 USB differential data plus, paired with DP4, common-mode input 0.8 V to 2.5 V."+ },+ {+ "number": "25",+ "name": "VCC",+ "type": "power_in",+ "description": "3.3 V supply voltage, recommended operating range 3.0 V to 3.6 V."+ },+ {+ "number": "26",+ "name": "EXTMEM",+ "type": "input",+ "description": "EEPROM interface control input; high disables interface, low enables pins 5-6 as serial interface, must not change during operation."+ },+ {+ "number": "27",+ "name": "TSTPLL/48MCLK",+ "type": "bidirectional",+ "description": "Test terminal or 48 MHz clock input; tie to ground for 6 MHz crystal mode or connect 48 MHz clock source."+ },+ {+ "number": "28",+ "name": "GND",+ "type": "power_in",+ "description": "Ground terminal."+ },+ {+ "number": "29",+ "name": "XTAL2",+ "type": "output",+ "description": "6 MHz crystal output, must be left open when using external oscillator."+ },+ {+ "number": "30",+ "name": "XTAL1",+ "type": "input",+ "description": "6 MHz crystal input with 50% duty cycle; internal PLL generates 48 MHz and 12 MHz clocks."+ },+ {+ "number": "31",+ "name": "TSTMODE",+ "type": "input",+ "description": "Test/mode control input; tie to ground for 6 MHz or to 3.3 V for 48 MHz operation, must not change during normal operation."+ },+ {+ "number": "32",+ "name": "SUSPND",+ "type": "output",+ "description": "Active high suspend status output; high during suspend mode, low during normal operation."+ },+ {+ "number": "33",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Exposed thermal pad physically present in VQFN-32-EP package shown in package outline (PAGE 27) and ",+ "exposed pad 33 added from the footprint"+ ],+ "pages_sent": 33,+ "cost_usd": 0.4149,+ "at": "2026-09-24T04:03:40"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tusb2046b",+ "pages": 33,+ "sha256": "eaa20027fc3dde2d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 33,+ "described": 33,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}