component
TUSB1106RGTR
Public Made by Adomby adom
Texas Instruments USB Converters, HVQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280
{
"schema_version": 1,
"type": "component",
"slug": "tusb1106rgtr",
"title": "TUSB1106RGTR",
"brief": "Texas Instruments USB Converters, HVQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"interface",
"tusb1106rgtr",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "TUSB1106RGTR",
"manufacturer": "Texas Instruments",
"package": "HVQFN-16-EP(3x3)",
"pin_count": 17,
"category": "Interface",
"subcategory": "USB Converters",
"datasheet": "https://www.ti.com/lit/ds/symlink/tusb1106.pdf",
"parts": {
"symbol": "tusb1106rgtr.kicad_sym",
"footprint": "tusb1106rgtr.kicad_mod",
"model_3d": "tusb1106rgtr-hero.glb",
"model_3d_plain": "tusb1106rgtr.glb",
"model_3d_step": "tusb1106rgtr-etched.step",
"model_3d_step_plain": "tusb1106rgtr.step",
"lbr": "tusb1106rgtr.lbr"
},
"distributor_links": {
"lcsc": "C2671295",
"digikey": "296-21924-2-ND",
"mouser": "595-TUSB1106RGTR"
},
"distributor_check": {
"checked_at": "2026-10-08T16:00:20Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-21924-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-TUSB1106RGTR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "OE",
"type": "input",
"description": "Active-LOW output enable (CMOS level with respect to VCC(I/O)) that enables the transceiver to transmit data on the USB bus."
},
{
"number": "2",
"name": "RCV",
"type": "output",
"description": "Differential data receiver output (CMOS level with respect to VCC(I/O), push-pull, 4-mA drive); driven LOW when SUSPND is HIGH and stable during SE0."
},
{
"number": "3",
"name": "VP",
"type": "output",
"description": "Single-ended D+ receiver output (CMOS level with respect to VCC(I/O), push-pull, 4-mA drive); driven HIGH when no supply is connected to VCC(5.0) and Vreg(3.3)."
},
{
"number": "4",
"name": "VM",
"type": "output",
"description": "Single-ended D- receiver output (CMOS level with respect to VCC(I/O), push-pull, 4-mA drive); driven HIGH when no supply is connected to VCC(5.0) and Vreg(3.3)."
},
{
"number": "5",
"name": "SUSPND",
"type": "input",
"description": "Suspend input (CMOS level with respect to VCC(I/O)); HIGH enables the low-power state while the USB bus is inactive and drives RCV LOW."
},
{
"number": "6",
"name": "GND",
"type": "power_in",
"description": "Ground supply pin on the TUSB1106 RGT package."
},
{
"number": "7",
"name": "VCC(I/O)",
"type": "power_in",
"description": "Digital I/O supply voltage of 1.65 to 3.6 V, independent of VCC(5.0) and Vreg(3.3) and must never exceed Vreg(3.3); D+ and D- are 3-state when it is not connected."
},
{
"number": "8",
"name": "SPEED",
"type": "input",
"description": "Speed selection input (CMOS level with respect to VCC(I/O)) that sets the D+/D- slew rate: LOW is low speed (1.5 Mbit/s), HIGH is full speed (12 Mbit/s)."
},
{
"number": "9",
"name": "D-",
"type": "bidirectional",
"description": "Negative USB data bus connection (analog, differential); for low-speed mode connect to Vpu(3.3) via a 1.5-kOhm resistor."
},
{
"number": "10",
"name": "D+",
"type": "bidirectional",
"description": "Positive USB data bus connection (analog, differential); for full-speed mode connect to Vpu(3.3) via a 1.5-kOhm resistor."
},
{
"number": "11",
"name": "VPO",
"type": "input",
"description": "Driver data input (CMOS level with respect to VCC(I/O), Schmitt trigger) for the differential input data interface."
},
{
"number": "12",
"name": "VMO",
"type": "input",
"description": "Driver data input (CMOS level with respect to VCC(I/O), Schmitt trigger) for the differential input data interface."
},
{
"number": "13",
"name": "Vreg(3.3)",
"type": "power_out",
"description": "Regulated 3 V to 3.6 V output during 5-V operation, needs a decoupling capacitor of at least 0.1 uF, and is the supply input for 3.3 V ±10% operation."
},
{
"number": "14",
"name": "VCC(5.0)",
"type": "power_in",
"description": "Internal regulator supply input of 4 V to 5.5 V, which can connect directly to USB VBUS; connect to Vreg(3.3) for the regulator bypass option."
},
{
"number": "15",
"name": "Vpu(3.3)",
"type": "power_out",
"description": "Pullup supply voltage (3.3 V ±10%) for the external 1.5-kOhm resistor on D+ or D-; high impedance when SOFTCON is LOW, connected internally to Vreg(3.3) when SOFTCON is HIGH."
},
{
"number": "16",
"name": "SOFTCON",
"type": "input",
"description": "Software-controlled USB connection input; HIGH applies 3.3 V to Vpu(3.3) for the external 1.5-kOhm pullup, allowing software connect/disconnect signaling."
},
{
"number": "17",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text+vision",
"consensus_model": "claude-opus-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The TUSB1106 RGT exposed die pad (pin 17) is drawn as 'No Connect', and the datasheet says the die p; The datasheet lists the RGT footprint as 3x3 mm, but the ordering table calls it VQFN rather than HV",
"exposed pad 17 added from the footprint",
"vision extraction: provenance cannot be text-verified; needs consensus"
],
"pages_sent": 36,
"cost_usd": 0.3214,
"at": "2026-10-08T15:59:59"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/tusb1106.pdf",
"pages": 36,
"sha256": "82d46206cda20726",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tusb1106rgtr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3,
3,
0.77
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "b32e528bf0799efacfbfd0e6175a168fff91b5905ee4d3720cfee9527a156853",
"checked": "2026-10-08",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tusb1106rgtr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3,
3,
0.77
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "2805d3592632ad6f637c2f9ff8525b5222696d9b73cffce9dce734535526eb1a",
"checked": "2026-10-08",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "HVQFN-16-EP(3x3)",
"Category": "Interface",
"Pins": "17"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"tusb1106rgtr"
],
"discovery_pitch": "TUSB1106RGTR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray",
"email": "[email protected]"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tusb1106rgtr.kicad_sym",
"tusb1106rgtr.kicad_mod",
"tusb1106rgtr.glb",
"tusb1106rgtr.step",
"tusb1106rgtr.lbr",
"docs/hero.png",
"docs/tusb1106rgtr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tusb1106rgtr-hero.glb",
"tusb1106rgtr-hero.overlay.json"
],
"visibility": {
"public": true
}
}