← Commit history

Initial commit: component/tusb1002airger

Ray ·7b32fe006d ·
2 files changed +307
README.mdadded+62
@@ -0,0 +1,62 @@+# TUSB1002AIRGER++**Texas Instruments** · USB Converters · VQFN-24-EP(4x4)++TUSB1002AIRGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC | power_in | 3.3V (±10%) power supply. |+| 2 | CH1_EQ1 | input | Configuration pin (4-level input) to control Rx EQ level for RX1P/N; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN. |+| 3 | CH1_EQ2 | input | Configuration pin (4-level input) to control Rx EQ level for RX1P/N; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN. |+| 4 | CFG1 | input | Configuration pin (4-level input) to select VOD linearity range and DC gain for both channels; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN. |+| 5 | EN | input | Enable pin (2-level input); places device into shutdown when asserted low, normal operation when asserted high; internal pullup 400kΩ. |+| 6 | GND | power_in | Ground. |+| 7 | MODE | input | Configuration pin (4-level input) for selecting different modes of operation; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN. |+| 8 | RX1N | input | Differential input for SuperSpeed and SuperSpeedPlus negative signals for Channel 1; 90Ω differential impedance. |+| 9 | RX1P | input | Differential input for SuperSpeed and SuperSpeedPlus positive signals for Channel 1; 90Ω differential impedance. |+| 10 | GND | power_in | Ground. |+| 11 | TX2N | output | Differential output for SuperSpeed and SuperSpeedPlus negative signals for Channel 2; 90Ω differential impedance. |+| 12 | TX2P | output | Differential output for SuperSpeed and SuperSpeedPlus positive signals for Channel 2; 90Ω differential impedance. |+| 13 | VCC | power_in | 3.3V (±10%) power supply. |+| 14 | DCBOOST# | input | DC Boost control pin (2-level input); when asserted low increases DC Gain level by +1dB unless already at +2dB; internal pullup 400kΩ. |+| 15 | CFG2 | input | Configuration pin (4-level input) to set VOD linearity range and DC gain for both channels; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN. |+| 16 | CH2_EQ1 | input | Configuration pin (4-level input) to control Rx EQ level for RX2P/N; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN. |+| 17 | CH2_EQ2 | input | Configuration pin (4-level input) to control Rx EQ level for RX2P/N; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN. |+| 18 | GND | power_in | Ground. |+| 19 | RX2P | input | Differential input for SuperSpeed and SuperSpeedPlus positive signals for Channel 2; 90Ω differential impedance. |+| 20 | RX2N | input | Differential input for SuperSpeed and SuperSpeedPlus negative signals for Channel 2; 90Ω differential impedance. |+| 21 | GND | power_in | Ground. |+| 22 | TX1P | output | Differential output for SuperSpeed and SuperSpeedPlus positive signals for Channel 1; 90Ω differential impedance. |+| 23 | TX1N | output | Differential output for SuperSpeed and SuperSpeedPlus negative signals for Channel 1; 90Ω differential impedance. |+| 24 | RSVD1 | output | Reserved pin; driven low by TUSB1002A under normal operation; recommend leaving unconnected on PCB. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24-EP(4x4) |+| Category | Interface |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `TUSB1002AIRGER`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `tusb1002airger-etched.step` / `tusb1002airger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tusb1002airger.step` / `tusb1002airger.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tusb1002a) (38 pp, sha256 `812f787239d604ef`, retrieved 2026-09-21, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tusb1002airger-datasheet.pdf)
page.jsonadded+245
@@ -0,0 +1,245 @@+{+  "slug": "tusb1002airger",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments USB Converters, VQFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "tusb1002airger",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tusb1002airger.kicad_sym",+    "tusb1002airger.kicad_mod",+    "tusb1002airger.glb",+    "tusb1002airger.step",+    "tusb1002airger.lbr",+    "docs/hero.png",+    "docs/tusb1002airger-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TUSB1002AIRGER",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "Interface",+    "subcategory": "USB Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tusb1002a",+    "parts": {+      "symbol": "tusb1002airger.kicad_sym",+      "footprint": "tusb1002airger.kicad_mod",+      "model_3d": "tusb1002airger-etched.glb",+      "model_3d_plain": "tusb1002airger.glb",+      "model_3d_step": "tusb1002airger-etched.step",+      "model_3d_step_plain": "tusb1002airger.step",+      "lbr": "tusb1002airger.lbr"+    },+    "distributor_links": {+      "lcsc": "C2672378"+    },+    "pins": [+      {+        "number": "1",+        "name": "VCC",+        "type": "power_in",+        "description": "3.3V (±10%) power supply."+      },+      {+        "number": "2",+        "name": "CH1_EQ1",+        "type": "input",+        "description": "Configuration pin (4-level input) to control Rx EQ level for RX1P/N; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN."+      },+      {+        "number": "3",+        "name": "CH1_EQ2",+        "type": "input",+        "description": "Configuration pin (4-level input) to control Rx EQ level for RX1P/N; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN."+      },+      {+        "number": "4",+        "name": "CFG1",+        "type": "input",+        "description": "Configuration pin (4-level input) to select VOD linearity range and DC gain for both channels; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN."+      },+      {+        "number": "5",+        "name": "EN",+        "type": "input",+        "description": "Enable pin (2-level input); places device into shutdown when asserted low, normal operation when asserted high; internal pullup 400kΩ."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Ground."+      },+      {+        "number": "7",+        "name": "MODE",+        "type": "input",+        "description": "Configuration pin (4-level input) for selecting different modes of operation; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN."+      },+      {+        "number": "8",+        "name": "RX1N",+        "type": "input",+        "description": "Differential input for SuperSpeed and SuperSpeedPlus negative signals for Channel 1; 90Ω differential impedance."+      },+      {+        "number": "9",+        "name": "RX1P",+        "type": "input",+        "description": "Differential input for SuperSpeed and SuperSpeedPlus positive signals for Channel 1; 90Ω differential impedance."+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Ground."+      },+      {+        "number": "11",+        "name": "TX2N",+        "type": "output",+        "description": "Differential output for SuperSpeed and SuperSpeedPlus negative signals for Channel 2; 90Ω differential impedance."+      },+      {+        "number": "12",+        "name": "TX2P",+        "type": "output",+        "description": "Differential output for SuperSpeed and SuperSpeedPlus positive signals for Channel 2; 90Ω differential impedance."+      },+      {+        "number": "13",+        "name": "VCC",+        "type": "power_in",+        "description": "3.3V (±10%) power supply."+      },+      {+        "number": "14",+        "name": "DCBOOST#",+        "type": "input",+        "description": "DC Boost control pin (2-level input); when asserted low increases DC Gain level by +1dB unless already at +2dB; internal pullup 400kΩ."+      },+      {+        "number": "15",+        "name": "CFG2",+        "type": "input",+        "description": "Configuration pin (4-level input) to set VOD linearity range and DC gain for both channels; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN."+      },+      {+        "number": "16",+        "name": "CH2_EQ1",+        "type": "input",+        "description": "Configuration pin (4-level input) to control Rx EQ level for RX2P/N; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN."+      },+      {+        "number": "17",+        "name": "CH2_EQ2",+        "type": "input",+        "description": "Configuration pin (4-level input) to control Rx EQ level for RX2P/N; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN."+      },+      {+        "number": "18",+        "name": "GND",+        "type": "power_in",+        "description": "Ground."+      },+      {+        "number": "19",+        "name": "RX2P",+        "type": "input",+        "description": "Differential input for SuperSpeed and SuperSpeedPlus positive signals for Channel 2; 90Ω differential impedance."+      },+      {+        "number": "20",+        "name": "RX2N",+        "type": "input",+        "description": "Differential input for SuperSpeed and SuperSpeedPlus negative signals for Channel 2; 90Ω differential impedance."+      },+      {+        "number": "21",+        "name": "GND",+        "type": "power_in",+        "description": "Ground."+      },+      {+        "number": "22",+        "name": "TX1P",+        "type": "output",+        "description": "Differential output for SuperSpeed and SuperSpeedPlus positive signals for Channel 1; 90Ω differential impedance."+      },+      {+        "number": "23",+        "name": "TX1N",+        "type": "output",+        "description": "Differential output for SuperSpeed and SuperSpeedPlus negative signals for Channel 1; 90Ω differential impedance."+      },+      {+        "number": "24",+        "name": "RSVD1",+        "type": "output",+        "description": "Reserved pin; driven low by TUSB1002A under normal operation; recommend leaving unconnected on PCB."+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 38,+        "cost_usd": 0.4321,+        "at": "2026-09-21T20:19:12"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tusb1002a",+        "pages": 38,+        "sha256": "812f787239d604ef",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file