Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TUSB1002AIRGER

Texas Instruments · USB Converters · VQFN-24-EP(4x4)

TUSB1002AIRGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in 3.3V (±10%) power supply.
2 CH1_EQ1 input Configuration pin (4-level input) to control Rx EQ level for RX1P/N; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN.
3 CH1_EQ2 input Configuration pin (4-level input) to control Rx EQ level for RX1P/N; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN.
4 CFG1 input Configuration pin (4-level input) to select VOD linearity range and DC gain for both channels; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN.
5 EN input Enable pin (2-level input); places device into shutdown when asserted low, normal operation when asserted high; internal pullup 400kΩ.
6 GND power_in Ground.
7 MODE input Configuration pin (4-level input) for selecting different modes of operation; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN.
8 RX1N input Differential input for SuperSpeed and SuperSpeedPlus negative signals for Channel 1; 90Ω differential impedance.
9 RX1P input Differential input for SuperSpeed and SuperSpeedPlus positive signals for Channel 1; 90Ω differential impedance.
10 GND power_in Ground.
11 TX2N output Differential output for SuperSpeed and SuperSpeedPlus negative signals for Channel 2; 90Ω differential impedance.
12 TX2P output Differential output for SuperSpeed and SuperSpeedPlus positive signals for Channel 2; 90Ω differential impedance.
13 VCC power_in 3.3V (±10%) power supply.
14 DCBOOST# input DC Boost control pin (2-level input); when asserted low increases DC Gain level by +1dB unless already at +2dB; internal pullup 400kΩ.
15 CFG2 input Configuration pin (4-level input) to set VOD linearity range and DC gain for both channels; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN.
16 CH2_EQ1 input Configuration pin (4-level input) to control Rx EQ level for RX2P/N; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN.
17 CH2_EQ2 input Configuration pin (4-level input) to control Rx EQ level for RX2P/N; internal pullup 45kΩ, pulldown 95kΩ; state sampled after rising edge of EN.
18 GND power_in Ground.
19 RX2P input Differential input for SuperSpeed and SuperSpeedPlus positive signals for Channel 2; 90Ω differential impedance.
20 RX2N input Differential input for SuperSpeed and SuperSpeedPlus negative signals for Channel 2; 90Ω differential impedance.
21 GND power_in Ground.
22 TX1P output Differential output for SuperSpeed and SuperSpeedPlus positive signals for Channel 1; 90Ω differential impedance.
23 TX1N output Differential output for SuperSpeed and SuperSpeedPlus negative signals for Channel 1; 90Ω differential impedance.
24 RSVD1 output Reserved pin; driven low by TUSB1002A under normal operation; recommend leaving unconnected on PCB.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-24-EP(4x4)
Category Interface
Pins 25

CAD (KiCad official)

  • Symbol: TUSB1002AIRGER
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
  • 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: tusb1002airger-etched.step / tusb1002airger-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tusb1002airger.step / tusb1002airger.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 812f787239d604ef, retrieved 2026-09-21, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF