Generated by kicad-footprint-generator · KiCad file format 20260206
TSX711AIYLT
STMicroelectronics · Operational Amplifier · SOT-23-5
TSX711AIYLT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Rail-to-rail op amp output that swings to within about 40 mV of either rail into a 10 kΩ load to VCC/2. |
| 2 | VCC- | power_in | Negative supply (ground in single-supply use); supply span VCC+ to VCC- is 2.7 to 16 V (absolute maximum 18 V). |
| 3 | IN+ | input | Non-inverting input with rail-to-rail common-mode range of (VCC-) - 0.1 V to (VCC+) + 0.1 V; limit input current to 10 mA with a series resistor. |
| 4 | IN- | input | Inverting input with rail-to-rail common-mode range of (VCC-) - 0.1 V to (VCC+) + 0.1 V; limit input current to 10 mA with a series resistor. |
| 5 | VCC+ | power_in | Positive supply, 2.7 to 16 V operating relative to VCC- (absolute maximum 18 V); a 22 nF decoupling capacitor close to this pin is recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 18 | V | 3 | |||
| Input current | Iin | 10 | mA | Must be limited by a series resistor | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Maximum junction temperature | Tj | 150 | °C | 3 | |||
| Thermal resistance junction to ambient | Rthja | 250 | °C/W | SOT23-5 | 3 | ||
| ESD HBM | HBM | 4000 | V | JESD22-A114F | 3 | ||
| ESD MM | MM | 100 | V | JESD22-A115A | 3 | ||
| ESD CDM | CDM | 1500 | V | ANSI/ESD STM5.3.1 | 3 | ||
| Latch-up immunity | 200 | mA | 3 | ||||
| Supply voltage | VCC | 2.7 | 16 | V | 3 | ||
| Operating free air temperature range | Toper | -40 | 125 | °C | 3 | ||
| Input offset voltage (TSX711A) | Vio | 100 | µV | VCC+ = 4 V, Vicm = VCC/2 | 4 | ||
| Input offset voltage (TSX711A) | Vio | 265 | µV | VCC+ = 4 V, Tmin < Top < 85 °C | 4 | ||
| Input offset voltage (TSX711A) | Vio | 350 | µV | VCC+ = 4 V, Tmin < Top < 125 °C | 4 | ||
| Input bias current | Iib | 1 | 50 | pA | VCC+ = 4 V, Vout = VCC/2 | 4 | |
| Input bias current | Iib | 200 | pA | VCC+ = 4 V, Tmin < Top < Tmax | 4 | ||
| Input offset current | Iio | 1 | 50 | pA | VCC+ = 4 V, Vout = VCC/2 | 4 | |
| Input offset current | Iio | 200 | pA | VCC+ = 4 V, Tmin < Top < Tmax | 4 | ||
| Common mode rejection ratio | CMRR | 84 | 102 | dB | VCC+ = 4 V, Vicm = -0.1 to 4.1 V, Vout = VCC/2 | 4 | |
| Common mode rejection ratio | CMRR | 100 | 122 | dB | VCC+ = 4 V, Vicm = -0.1 to 2 V, Vout = VCC/2 | 4 | |
| Large signal voltage gain | Avd | 110 | 136 | dB | VCC+ = 4 V, RL = 2 kΩ, Vout = 0.3 to 3.7 V | 4 | |
| High level output voltage (drop from VCC+) | VOH | 6 | 15 | mV | VCC+ = 4 V, RL = 10 kΩ to VCC/2 | 4 | |
| Low level output voltage | VOL | 5 | 15 | mV | VCC+ = 4 V, RL = 10 kΩ to VCC/2 | 5 | |
| Output sink current | Isink | 35 | 45 | mA | VCC+ = 4 V, Vout = VCC | 5 | |
| Output source current | Isource | 35 | 45 | mA | VCC+ = 4 V, Vout = 0 V | 5 | |
| Supply current per amplifier | ICC | 570 | 800 | µA | VCC+ = 4 V, No load, Vout = VCC/2 | 5 | |
| Supply current per amplifier | ICC | 900 | µA | VCC+ = 4 V, Tmin < Top < Tmax | 5 | ||
| Gain bandwidth product | GBP | 1.9 | 2.7 | MHz | VCC+ = 4 V, RL = 10 kΩ, CL = 100 pF | 5 | |
| Negative slew rate | SRn | 0.6 | 0.85 | V/µs | VCC+ = 4 V, Av = 1, Vout = 3 VPP, 10 % to 90 % | 5 | |
| Positive slew rate | SRp | 1 | 1.4 | V/µs | VCC+ = 4 V, Av = 1, Vout = 3VPP, 10 % to 90 % | 5 | |
| Input offset voltage drift | ΔVio/ΔT | 2.5 | µV/°C | VCC+ = 4 V | 4 | ||
| Input offset voltage (TSX711A) | Vio | 100 | µV | VCC+ = 10 V, Vicm = VCC/2 | 6 | ||
| Common mode rejection ratio | CMRR | 90 | 102 | dB | VCC+ = 10 V, Vicm = -0.1 to 10.1 V, Vout = VCC/2 | 6 | |
| High level output voltage (drop from VCC+) | VOH | 10 | 30 | mV | VCC+ = 10 V, RL = 10 kΩ ο VCC/2 | 6 | |
| Output sink current | Isink | 50 | 70 | mA | VCC+ = 10 V, Vout = VCC | 6 | |
| Supply current per amplifier | ICC | 630 | 850 | µA | VCC+ = 10 V, No load, Vout = VCC/2 | 7 | |
| Supply current per amplifier | ICC | 1000 | µA | VCC+ = 10 V, Tmin < Top < Tmax | 7 | ||
| Input offset voltage (TSX711A) | Vio | 100 | µV | VCC+ = 16 V, Vicm = VCC/2 | 8 | ||
| Input offset voltage (TSX711A) | Vio | 350 | µV | VCC+ = 16 V, Tmin < Top < 125 °C | 8 | ||
| Common mode rejection ratio | CMRR | 94 | 113 | dB | VCC+ = 16 V, Vicm = -0.1 to 16.1 V, Vout = VCC/2 | 8 | |
| Common mode rejection ratio | CMRR | 110 | 116 | dB | VCC+ = 16 V, Vicm = -0.1 to 14 V, Vout = VCC/2 | 8 | |
| Supply voltage rejection ratio | SVRR | 100 | 131 | dB | VCC+ = 16 V, Vcc = 4 to 16 V | 8 | |
| Supply voltage rejection ratio | SVRR | 90 | dB | VCC+ = 16 V, Tmin < Top < Tmax | 8 | ||
| Large signal voltage gain | Avd | 110 | 146 | dB | VCC+ = 16 V, RL = 2 kΩ, Vout = 0.3 to 15.7 V | 8 | |
| High level output voltage (drop from VCC+) | VOH | 100 | 130 | mV | VCC+ = 16 V, RL = 2 kΩ (TSX711, TSX711A) | 8 | |
| High level output voltage (drop from VCC+) | VOH | 16 | 40 | mV | VCC+ = 16 V, RL = 10 kΩ | 8 | |
| Low level output voltage | VOL | 15 | 40 | mV | VCC+ = 16 V, RL = 10 kΩ | 9 | |
| Output sink current | Isink | 50 | 71 | mA | VCC+ = 16 V, Vout = VCC | 9 | |
| Output source current | Isource | 50 | 68 | mA | VCC+ = 16 V, Vout = 0 V | 9 | |
| Supply current per amplifier | ICC | 660 | 900 | µA | VCC+ = 16 V, No load, Vout = VCC/2 | 9 | |
| Supply current per amplifier | ICC | 1000 | µA | VCC+ = 16 V, Tmin < Top < Tmax | 9 | ||
| Gain bandwidth product | GBP | 1.9 | 2.7 | MHz | VCC+ = 16 V, RL = 10 kΩ, CL = 100 pF | 9 | |
| Negative slew rate | SRn | 0.7 | 0.95 | V/µs | VCC+ = 16 V, Av = 1, Vout = 10 VPP, 10 % to 90 % | 9 | |
| Positive slew rate | SRp | 1 | 1.4 | V/µs | VCC+ = 16 V, Av = 1, Vout = 10 VPP, 10 % to 90 % | 9 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | Reworked the following sections: Cover image, Related products, Description, Section 1: "Package pin connections", Section 2: "Absolute maximum ratings and operating | 28 | |
| contacts | copper | The copper traces that connect the output pins to the load and supply pins should be as wide as possible to | 21 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TSX711AIYLT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tsx711aiylt-etched.step/tsx711aiylt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsx711aiylt.step/tsx711aiylt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (29 pp, sha256
e5fca922f7e4dd49, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).