Generated by kicad-footprint-generator · KiCad file format 20260206
TSX3702IST
STMicroelectronics · Comparators · MSOP-8
TSX3702IST from STMicroelectronics, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Push-pull output of comparator 1. |
| 2 | In1- | input | Inverting input of comparator 1; input voltage range -0.3 V to 16 V regardless of VCC+. |
| 3 | In1+ | input | Non-inverting input of comparator 1; input voltage range -0.3 V to 16 V regardless of VCC+. |
| 4 | Vcc- | power_in | Negative supply voltage (ground for single-supply operation, or negative rail for dual supplies down to ±1.35 V to ±8 V). |
| 5 | In2+ | input | Non-inverting input of comparator 2; input voltage range -0.3 V to 16 V regardless of VCC+. |
| 6 | In2- | input | Inverting input of comparator 2; input voltage range -0.3 V to 16 V regardless of VCC+. |
| 7 | Out2 | output | Push-pull output of comparator 2. |
| 8 | Vcc+ | power_in | Positive supply voltage, 2.7 V to 16 V operating (18 V absolute maximum). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC+ | 18 | V | 3 | |||
| Differential input voltage | Vid | -18 | 18 | V | 3 | ||
| Input voltage | Vin | -0.3 | 18 | V | 3 | ||
| Output voltage | Vo | 18 | V | 3 | |||
| Output current | Io | 20 | mA | 3 | |||
| Forward current in ESD protection diodes on inputs | IF | 50 | mA | Guaranteed by design | 3 | ||
| Maximum junction temperature | Tj | 150 | ºC | 3 | |||
| Storage temperature range | Tstg | -65 | 150 | ºC | 3 | ||
| Thermal resistance junction to ambient | Rthja | 190 | ºC/W | MiniSO8 | 3 | ||
| ESD HBM | ESD | 4000 | V | Human body model | 3 | ||
| ESD MM | ESD | 200 | V | Machine model | 3 | ||
| ESD CDM | ESD | 1500 | V | Charged device model | 3 | ||
| Latch-up immunity | 200 | mA | 3 | ||||
| Supply voltage | VCC+ | 2.7 | 16 | V | 4 | ||
| Common mode input voltage range (upper limit VCC+ - 1.5) | Vicm | 0 | V | 0 to VCC+ - 1.5; Tmin ≤ Tamb ≤ Tmax: 0 to VCC+ - 2 | 4 | ||
| Operating free-air temperature range | Toper | -40 | 125 | ºC | 4 | ||
| Input offset voltage | Vio | -5 | 0.1 | 5 | mV | VCC+ = 3 V, Vicm = 0 V | 6 |
| Input offset voltage over temperature | Vio | -6 | 6 | mV | VCC+ = 3 V, Tmin ≤ Tamb ≤ Tmax | 6 | |
| Input offset current | Iio | 1 | 10 | pA | VCC+ = 3 V, Vicm = VCC/2 | 6 | |
| Input bias current | Iib | 1 | 10 | pA | VCC+ = 3 V, Vicm = VCC/2 | 6 | |
| Common-mode rejection ratio | CMR | 58 | 73 | dB | VCC+ = 3 V, Vicm = 0 to max Vicm | 6 | |
| Supply voltage rejection ratio | SVR | 69 | 88 | dB | VCC+ = 3 V to 5 V, Vicm = VCC/2 | 6 | |
| High-level output voltage drop | VOH | 300 | 400 | mV | VCC+ = 3 V, Vid = 1 V, IOH = 4 mA | 6 | |
| Low-level output voltage | VOL | 300 | 400 | mV | VCC+ = 3 V, Vid = -1 V, IOL = 4 mA | 6 | |
| Supply current per comparator, outputs low | ICC | 5 | 6 | μA | VCC+ = 3 V, No load, outputs low | 6 | |
| Supply current per comparator, outputs high | ICC | 8 | 9 | μA | VCC+ = 3 V, No load, outputs high | 6 | |
| Input offset voltage | Vio | -5 | 0.1 | 5 | mV | VCC+ = 5 V, Vicm = VCC/2 | 7 |
| Input offset voltage over temperature | Vio | -6 | 6 | mV | VCC+ = 5 V, Tmin ≤ Tamb ≤ Tmax | 7 | |
| Input offset current | Iio | 1 | 10 | pA | VCC+ = 5 V, Vicm = VCC/2 | 7 | |
| Input bias current | Iib | 1 | 10 | pA | VCC+ = 5 V, Vicm = VCC/2 | 7 | |
| Common-mode rejection ratio | CMR | 66 | 85 | dB | VCC+ = 5 V, Vicm = 0 to max Vicm | 7 | |
| Supply voltage rejection ratio | SVR | 71 | 89 | dB | VCC+ = 5 V to 10 V, Vicm = VCC/2 | 7 | |
| High-level output voltage drop | VOH | 180 | 250 | mV | VCC+ = 5 V, Vid = 1 V, IOH = 4 mA | 7 | |
| Low-level output voltage | VOL | 180 | 250 | mV | VCC+ = 5 V, Vid = -1 V, IOL = 4 mA | 7 | |
| Supply current per comparator, outputs low | ICC | 5 | 8 | μA | VCC+ = 5 V, No load, outputs low | 7 | |
| Supply current per comparator, outputs high | ICC | 9 | 10 | μA | VCC+ = 5 V, No load, outputs high | 7 | |
| Response time low to high | tPLH | 0.35 | 0.55 | μs | VCC+ = 5 V, Vicm = 0 V, f = 10 kHz, RL = 5.1 kΩ, CL = 50 pF, Overdrive = 100 mV | 7 | |
| Response time high to low | tPHL | 0.46 | 0.6 | μs | VCC+ = 5 V, Vicm = 0 V, f = 10 kHz, RL = 5.1 kΩ, CL = 50 pF, Overdrive = 100 mV | 7 | |
| Input offset voltage | Vio | -5 | 0.1 | 5 | mV | VCC+ = 16 V, Vicm = VCC/2 | 9 |
| Input offset voltage over temperature | Vio | -6 | 6 | mV | VCC+ = 16 V, Tmin ≤ Tamb ≤ Tmax | 9 | |
| Input offset current | Iio | 1 | 10 | pA | VCC+ = 16 V, Vicm = VCC/2 | 9 | |
| Input bias current | Iib | 1 | 10 | pA | VCC+ = 16 V, Vicm = VCC/2 | 9 | |
| Common-mode rejection ratio | CMR | 72 | 90 | dB | VCC+ = 16 V, Vicm = 0 to max Vicm | 9 | |
| Supply voltage rejection ratio | SVR | 73 | 90 | dB | VCC+ = 5 V to 16 V, Vicm = VCC/2 | 9 | |
| High-level output voltage drop | VOH | 90 | 150 | mV | VCC+ = 16 V, Vid = 1 V, IOH = 4 mA | 9 | |
| Low-level output voltage | VOL | 90 | 150 | mV | VCC+ = 16 V, Vid = -1 V, IOL = 4 mA | 9 | |
| Supply current per comparator, outputs low | ICC | 7 | 9 | μA | VCC+ = 16 V, No load, outputs low | 9 | |
| Supply current per comparator, outputs high | ICC | 11 | 13 | μA | VCC+ = 16 V, No load, outputs high | 9 | |
| Response time low to high | tPLH | 0.34 | 0.55 | μs | VCC+ = 16 V, Vicm = 0 V, f = 10 kHz, RL = 5.1 kΩ, CL = 50 pF, Overdrive = 100 mV | 9 | |
| Response time high to low | tPHL | 0.55 | 0.7 | μs | VCC+ = 16 V, Vicm = 0 V, f = 10 kHz, RL = 5.1 kΩ, CL = 50 pF, Overdrive = 100 mV | 9 |
CAD (KiCad official)
- Symbol:
TSX3702IST - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tsx3702ist-etched.step/tsx3702ist-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsx3702ist.step/tsx3702ist.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (25 pp, sha256
ffd897beeb93f18b, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).