component

TSV914IDT

Public Made by Adom

by adom

UMW Operational Amplifier, SOP-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmptsv914idt
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tsv914idt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json tsv914idt: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
README.md tsv914idt: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray
tsv914idt-etched.fit.json tsv914idt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tsv914idt-etched.glb tsv914idt: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
tsv914idt-etched.step tsv914idt: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
tsv914idt.glb Publish 0.1.0 · Ray
tsv914idt.kicad_mod Publish 0.1.0 · Ray
tsv914idt.kicad_sym Publish 0.1.0 · Ray
tsv914idt.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
tsv914idt.step Publish 0.1.0 · Ray

TSV914IDT

UMW · Operational Amplifier · SOP-14

TSV914IDT from UMW, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of op-amp channel 1. Rail-to-rail output; short-circuit current up to 35 mA source / 32 mA sink (typ). VOH within 15 mV of VCC+ with 10 kΩ load.
2 IN1- input Inverting input of op-amp channel 1. Rail-to-rail input; common-mode range (VCC-)-0.1 V to (VCC+)+0.1 V. Input bias current 1 pA typ.
3 IN1+ input Non-inverting input of op-amp channel 1. Rail-to-rail input; common-mode range (VCC-)-0.1 V to (VCC+)+0.1 V.
4 VCC+ power_in Positive supply. 2.5 V to 5.5 V (2.3 V to 5.5 V for 0 °C ≤ Top ≤ 125 °C). Absolute maximum 6 V. Supply current 0.78 mA typ, 1.1 mA max per channel.
5 IN2+ input Non-inverting input of op-amp channel 2. Rail-to-rail input.
6 IN2- input Inverting input of op-amp channel 2. Rail-to-rail input.
7 OUT2 output Output of op-amp channel 2. Rail-to-rail output.
8 OUT3 output Output of op-amp channel 3. Rail-to-rail output.
9 IN3- input Inverting input of op-amp channel 3.
10 IN3+ input Non-inverting input of op-amp channel 3.
11 VCC- power_in Negative supply / ground. Tie to 0 V for single-supply operation, or to a negative rail for split-supply. Total supply (VCC+)-(VCC-) must not exceed 6 V.
12 IN4+ input Non-inverting input of op-amp channel 4.
13 IN4- input Inverting input of op-amp channel 4.
14 OUT4 output Output of op-amp channel 4. Rail-to-rail output.

Key specifications

Parameter Value
Manufacturer UMW
Package SOP-14
Category Op-amp/Cmp
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • TSV914IDT
  • TSV914IDTIPT

CAD (KiCad official)

  • Symbol: TSV914IDT
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14 (KiCad packages3D, STEP)
  • 3D model files: tsv914idt-etched.step / tsv914idt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tsv914idt.step / tsv914idt.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
tsv914idt.step 195 KB You want the bare part, or you mark your own boards.
tsv914idt-etched.step 1.9 MB You want the part with TSV914IDT already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 493 faces against 237 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UMW datasheet (19 pp, sha256 d61d4009d5b8915e, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF