component

TSV620AILT

Public Made by Adom

by adom

STMicroelectronics Operational Amplifier, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentamplifiers-comparatorstsv620ailtfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TSV620AILT

STMicroelectronics · Operational Amplifier · SOT-23-6

TSV620AILT from STMicroelectronics, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 In+ input Non-inverting input; common mode range extends from (VCC-) - 0.1 V to (VCC+) + 0.1 V.
2 VCC- power_in Negative supply (ground); supply voltage range 1.5 V to 5.5 V between VCC+ and VCC-.
3 In- input Inverting input; input current must be limited to 10 mA by a series resistor.
4 Out output Rail-to-rail amplifier output, within 35 mV max of the rails with a 10 kΩ load, high impedance in shutdown.
5 SHDN input Active-low shutdown: high enables the amplifier, pulled to VCC- disables it, and it must never be left floating.
6 VCC+ power_in Positive supply, 1.5 V to 5.5 V operating range, with 6 V absolute maximum; 10 nF decoupling is advised close to the pin.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (25 °C, 1.8 V) Vio 0.8 mV VCC+ = 1.8 V, Top = 25 °C 4
Input offset current (25 °C, 1.8 V) Iio 1 10 pA VCC+ = 1.8 V, Vout = VCC/2 4
Input bias current (25 °C, 1.8 V) Iib 1 10 pA VCC+ = 1.8 V, Vout = VCC/2 4
Common mode rejection ratio (1.8 V) CMR 53 74 dB VCC+ = 1.8 V, 0 V to 1.8 V, Vout = 0.9 V 4
Large signal voltage gain (1.8 V) Avd 78 95 dB VCC+ = 1.8 V, RL = 10 kΩ, Vout = 0.5 V to 1.3 V 4
High level output voltage (1.8 V) VOH 5 35 mV VCC+ = 1.8 V, RL = 10 kΩ, VOH = VCC - Vout 4
Low level output voltage (1.8 V) VOL 4 35 mV VCC+ = 1.8 V, RL = 10 kΩ 4
Output sink current (1.8 V) Isink 6 12 mA VCC+ = 1.8 V, Vo = 1.8 V 4
Output source current (1.8 V) Isource 6 10 mA VCC+ = 1.8 V, Vo = 0 V 4
Supply current per operator (1.8 V) ICC 25 31 µA VCC+ = 1.8 V, No load, Vout = VCC/2 4
Gain bandwidth product (1.8 V) GBP 275 340 kHz VCC+ = 1.8 V, RL = 10 kΩ, CL = 100 pF, f = 100 kHz 4
Phase margin (1.8 V) φm 45 Degrees VCC+ = 1.8 V, RL = 10 kΩ, CL = 100 pF 4
Gain margin (1.8 V) Gm 9 dB VCC+ = 1.8 V, RL = 10 kΩ, CL = 100 pF 4
Slew rate (1.8 V) SR 0.084 0.11 0.14 V/µs VCC+ = 1.8 V, RL = 10 kΩ, CL = 100 pF, Av = 1 4
Input offset voltage (25 °C, 3.3 V) Vio 0.8 mV VCC+ = 3.3 V, Top = 25 °C 6
Input offset current (25 °C, 3.3 V) Iio 1 10 pA VCC+ = 3.3 V, Vicm = VCC/2 6
Input bias current (25 °C, 3.3 V) Iib 1 10 pA VCC+ = 3.3 V, Vicm = VCC/2 6
Common mode rejection ratio (3.3 V) CMR 57 79 dB VCC+ = 3.3 V, 0 V to 3.3 V, Vout = 1.75 V 6
Large signal voltage gain (3.3 V) Avd 81 98 dB VCC+ = 3.3 V, RL = 10 kΩ, Vout = 0.5 V to 2.8 V 6
High level output voltage (3.3 V) VOH 5 35 mV VCC+ = 3.3 V, RL = 10 kΩ, VOH = VCC - Vout 6
Low level output voltage (3.3 V) VOL 4 35 mV VCC+ = 3.3 V, RL = 10 kΩ 6
Output sink current (3.3 V) Isink 30 45 mA VCC+ = 3.3 V, Vo = 5 V 6
Output source current (3.3 V) Isource 30 38 mA VCC+ = 3.3 V, Vo = 0 V 6
Supply current per operator (3.3 V) ICC 26 33 µA VCC+ = 3.3 V, No load, Vout = 2.5 V 6
Gain bandwidth product (3.3 V) GBP 310 380 kHz VCC+ = 3.3 V, RL = 10 kΩ, CL = 100 pF, f = 100 kHz 6
Phase margin (3.3 V) φm 45 Degrees VCC+ = 3.3 V, RL = 10 kΩ, CL = 100 pF 6
Gain margin (3.3 V) Gm 9 dB VCC+ = 3.3 V, RL = 10 kΩ, CL = 100 pF 6
Slew rate (3.3 V) SR 0.094 0.12 V/µs VCC+ = 3.3 V, RL = 10 kΩ, CL = 100 pF, AV = 1 6
Input offset voltage (25 °C, 5 V) Vio 0.8 mV VCC+ = 5 V, Top = 25 °C 7
Input offset current (25 °C, 5 V) Iio 1 10 pA VCC+ = 5 V, Vicm = VCC/2 7
Input bias current (25 °C, 5 V) Iib 1 10 pA VCC+ = 5 V, Vicm = VCC/2 7
Common mode rejection ratio (5 V) CMR 60 80 dB VCC+ = 5 V, 0 V to 5 V, Vout = 2.5 V 7
Supply voltage rejection ratio (5 V) SVR 75 102 dB VCC = 1.8 to 5 V 7
Large signal voltage gain (5 V) Avd 85 98 dB VCC+ = 5 V, RL = 10 kΩ, Vout = 0.5 V to 4.5 V 7
High level output voltage (5 V) VOH 7 35 mV VCC+ = 5 V, RL = 10 kΩ, VOH = VCC - Vout 7
Low level output voltage (5 V) VOL 6 35 mV VCC+ = 5 V, RL = 10 kΩ 7
Output sink current (5 V) Isink 40 69 mA VCC+ = 5 V, Vo = 5 V 7
Output source current (5 V) Isource 40 74 mA VCC+ = 5 V, Vo = 0 V 7
Supply current per operator (5 V) ICC 29 36 µA VCC+ = 5 V, No load, Vout = 2.5 V 7
Gain bandwidth product (5 V) GBP 350 420 kHz VCC+ = 5 V, RL = 10 kΩ, CL = 100 pF, f = 100 kHz 7
Phase margin (5 V) φm 45 Degrees VCC+ = 5 V, RL = 10 kΩ, CL = 100 pF 7
Gain margin (5 V) Gm 9 dB VCC+ = 5 V, RL = 10 kΩ, CL = 100 pF 7
Slew rate (5 V) SR 0.108 0.14 V/µs VCC+ = 5 V, RL = 10 kΩ, CL = 100 pF, AV = 1 7
Supply current in shutdown mode (all operators, 5 V) ICC 5 50 nA VCC = 5 V, SHDN = VCC- 8
Amplifier turn-on time (5 V) ton 300 ns VCC = 5 V, RL = 2 kΩ, Vout = (VCC-) to (VCC-) + 0.2 8
Amplifier turn-off time (5 V) toff 30 ns VCC = 5 V, RL = 2 kΩ, Vout = (VCC+) - 0.5 to (VCC+) + 0.7 8
SHDN logic high (5 V) VIH 4.5 V VCC = 5 V 8
SHDN logic low (5 V) VIL 0.5 V VCC = 5 V 8
Output leakage in shutdown mode (5 V) IOLeak 50 nA VCC = 5 V, SHDN = VCC- 8
Supply voltage VCC 1.5 5.5 V 3
Operating free air temperature range Toper -40 125 °C 3
Supply voltage (absolute maximum) VCC 6 V 3
Input current Iin 10 mA Must be limited by series input resistor 3
Storage temperature Tstg -65 150 °C 3
Maximum junction temperature Tj 150 °C 3
ESD HBM 4 kV Human body model 3
ESD machine model 300 V Machine model 3
ESD charged device model 1.5 kV Charged device model 3
Thermal resistance junction to ambient (SOT23-6) Rthja 240 °C/W SOT23-6, typical value 3

CAD (KiCad official)

  • Symbol: TSV620AILT
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: tsv620ailt-etched.step / tsv620ailt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tsv620ailt.step / tsv620ailt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (24 pp, sha256 e2cbf1a22b9fb858, retrieved 2026-10-08, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF