Generated by kicad-footprint-generator · KiCad file format 20260206
TSV6191ILT
STMicroelectronics · Operational Amplifier · SOT-23-5
TSV6191ILT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | In+ | input | Non-inverting input; common mode range is (VCC-) - 0.1 V to (VCC+) + 0.1 V and input bias current is 1 pA typ. |
| 2 | VCC- | power_in | Negative supply, ground for single-supply operation; supply voltage range is 1.5 to 5.5 V between VCC+ and VCC-. |
| 3 | In- | input | Inverting input; the amplifier must be used in a gain configuration (equal or above 4 or -3). |
| 4 | Out | output | Rail-to-rail output swinging to within 35 mV max of each rail with a 10 kΩ load to VCC/2. |
| 5 | VCC+ | power_in | Positive supply, 1.5 to 5.5 V operating range with a 10 nF decoupling capacitor advised close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (operating) | VCC | 1.5 | 5.5 | V | 3 | ||
| Operating free air temperature range | Toper | -40 | 85 | °C | 3 | ||
| Supply voltage (absolute maximum) | VCC | 6 | V | Voltages referenced to network ground | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Maximum junction temperature | Tj | 150 | °C | 3 | |||
| ESD human body model | HBM | 4 | kV | 100 pF discharged through 1.5 kΩ | 3 | ||
| ESD machine model | MM | 200 | V | 200 pF cap, no series resistor | 3 | ||
| ESD charged device model | CDM | 1.5 | kV | 3 | |||
| Input offset voltage (TSV619x) | Vio | 4 | mV | VCC+ = 1.8 V, Tamb = 25 °C | 4 | ||
| Input offset voltage over temperature (TSV619x) | Vio | 5 | mV | VCC+ = 1.8 V, Tmin < Top < Tmax | 4 | ||
| Input offset current | Iio | 1 | 10 | pA | VCC+ = 1.8 V, Vout = Vcc/2 | 4 | |
| Input bias current | Iib | 1 | 10 | pA | VCC+ = 1.8 V, Vout = Vcc/2 | 4 | |
| Common mode rejection ratio | CMR | 55 | 71 | dB | VCC+ = 1.8 V, 0 V to 1.8 V, Vout = 0.9 V | 4 | |
| Common mode rejection ratio over temperature | CMR | 53 | dB | VCC+ = 1.8 V, Tmin < Top < Tmax | 4 | ||
| Large signal voltage gain | Avd | 78 | 83 | VCC+ = 1.8 V, RL = 10 kΩ, Vout = 0.5 V to 1.3 V | 4 | ||
| Large signal voltage gain over temperature | Avd | 74 | VCC+ = 1.8 V, Tmin < Top < Tmax | 4 | |||
| High level output voltage (VCC - Vout) | VOH | 4 | 35 | mV | VCC+ = 1.8 V, RL = 10 kΩ | 4 | |
| High level output voltage over temperature | VOH | 50 | mV | VCC+ = 1.8 V, RL = 10 kΩ, Tmin < Top < Tmax | 4 | ||
| Low level output voltage | VOL | 7 | 35 | mV | VCC+ = 1.8 V, RL = 10 kΩ | 4 | |
| Low level output voltage over temperature | VOL | 50 | mV | VCC+ = 1.8 V, RL = 10 kΩ, Tmin < Top < Tmax | 4 | ||
| Output sink current | Isink | 9 | 13 | mA | VCC+ = 1.8 V, Vo = 1.8 V, Tmin < Top < Tmax | 4 | |
| Output source current | Isource | 8 | 10 | mA | VCC+ = 1.8 V, Vo = 0 V, Tmin < Top < Tmax | 4 | |
| Supply current (per operator) | ICC | 6.5 | 9 | 12 | µA | VCC+ = 1.8 V, No load, Vout = Vcc/2 | 4 |
| Supply current (per operator) over temperature | ICC | 6 | 12.5 | µA | VCC+ = 1.8 V, Tmin < Top < Tmax | 4 | |
| Input offset voltage (TSV619x) | Vio | 4 | mV | VCC+ = 3.3 V, Tamb = 25 °C | 5 | ||
| Input offset voltage over temperature (TSV619x) | Vio | 5 | mV | VCC+ = 3.3 V, Tmin < Top < Tmax | 5 | ||
| Input offset current | Iio | 1 | 10 | pA | VCC+ = 3.3 V | 5 | |
| Input bias current | Iib | 1 | 10 | pA | VCC+ = 3.3 V | 5 | |
| Common mode rejection ratio | CMR | 61 | 76 | dB | VCC+ = 3.3 V, 0 V to 3.3 V, Vout = 1.75 V | 5 | |
| Common mode rejection ratio over temperature | CMR | 58 | dB | VCC+ = 3.3 V, Tmin < Top < Tmax | 5 | ||
| Large signal voltage gain | Avd | 85 | 92 | VCC+ = 3.3 V, RL = 10 kΩ, Vout = 0.5 V to 2.8 V | 5 | ||
| Large signal voltage gain over temperature | Avd | 83 | VCC+ = 3.3 V, Tmin < Top < Tmax | 5 | |||
| High level output voltage (VCC - Vout) | VOH | 5 | 35 | mV | VCC+ = 3.3 V, RL = 10 kΩ | 5 | |
| High level output voltage over temperature | VOH | 50 | mV | VCC+ = 3.3 V, RL = 10 kΩ, Tmin < Top < Tmax | 5 | ||
| Low level output voltage | VOL | 10 | 35 | mV | VCC+ = 3.3 V, RL = 10 kΩ | 5 | |
| Low level output voltage over temperature | VOL | 50 | mV | VCC+ = 3.3 V, RL = 10 kΩ, Tmin < Top < Tmax | 5 | ||
| Output sink current | Isink | 35 | 44 | mA | VCC+ = 3.3 V, Vo = VCC, Tmin < Top < Tmax | 5 | |
| Output source current | Isource | 30 | 38 | mA | VCC+ = 3.3 V, Vo = 0 V, Tmin < Top < Tmax | 5 | |
| Supply current (per operator) | ICC | 6.5 | 9.5 | 12.5 | µA | VCC+ = 3.3 V, No load, Vout = VCC/2 | 5 |
| Supply current (per operator) over temperature | ICC | 6 | 13 | µA | VCC+ = 3.3 V, Tmin < Top < Tmax | 5 | |
| Input offset voltage (TSV619x) | Vio | 4 | mV | VCC+ = 5 V, Tamb = 25 °C | 6 | ||
| Input offset voltage over temperature (TSV619x) | Vio | 5 | mV | VCC+ = 5 V, Tmin < Top < Tmax | 6 | ||
| Input offset current | Iio | 1 | 10 | pA | VCC+ = 5 V | 6 | |
| Input bias current | Iib | 1 | 10 | pA | VCC+ = 5 V | 6 | |
| Common mode rejection ratio | CMR | 64 | 80 | dB | VCC+ = 5 V, 0 V to 5 V, Vout = 2.5 V | 6 | |
| Common mode rejection ratio over temperature | CMR | 63 | dB | VCC+ = 5 V, Tmin < Top < Tmax | 6 | ||
| Supply voltage rejection ratio | SVR | 76 | 93 | dB | VCC+ = 5 V, Vcc = 1.8 to 5 V | 6 | |
| Supply voltage rejection ratio over temperature | SVR | 74 | dB | VCC+ = 5 V, Vcc = 1.8 to 5 V, Tmin < Top < Tmax | 6 | ||
| Large signal voltage gain | Avd | 88 | 93 | VCC+ = 5 V, RL = 10 kΩ, Vout = 0.5 V to 4.5 V | 6 | ||
| Large signal voltage gain over temperature | Avd | 85 | VCC+ = 5 V, Tmin < Top < Tmax | 6 | |||
| High level output voltage (VCC - Vout) | VOH | 7 | 35 | mV | VCC+ = 5 V, RL = 10 kΩ | 6 | |
| High level output voltage over temperature | VOH | 50 | mV | VCC+ = 5 V, RL = 10 kΩ, Tmin < Top < Tmax | 6 | ||
| Low level output voltage | VOL | 16 | 35 | mV | VCC+ = 5 V, RL = 10 kΩ | 6 | |
| Low level output voltage over temperature | VOL | 50 | mV | VCC+ = 5 V, RL = 10 kΩ, Tmin < Top < Tmax | 6 | ||
| Output sink current | Isink | 42 | 57 | mA | VCC+ = 5 V, Vo = VCC, Tmin < Top < Tmax | 6 | |
| Output source current | Isource | 49 | 63 | mA | VCC+ = 5 V, Vo = 0 V, Tmin < Top < Tmax | 6 | |
| Supply current (per operator) | ICC | 7.5 | 10.5 | 14 | µA | VCC+ = 5 V, No load, Vout = VCC/2 | 6 |
| Supply current (per operator) over temperature | ICC | 7 | 15 | µA | VCC+ = 5 V, Tmin < Top < Tmax | 6 | |
| Thermal resistance junction to ambient (SOT23-5) | Rthja | 250 | °C/W | SOT23-5; typical value | 3 |
CAD (KiCad official)
- Symbol:
TSV6191ILT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tsv6191ilt-etched.step/tsv6191ilt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsv6191ilt.step/tsv6191ilt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (18 pp, sha256
6400461d5eb65c98, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).