component
TSV358IYPT
Public Made by Adomby adom
STMicroelectronics Operational Amplifier, TSSOP-8. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTSV358IYPT
STMicroelectronics · Operational Amplifier · TSSOP-8
TSV358IYPT from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output 1 | output | Output of amplifier 1, rail-to-rail with output swing within 100 mV of each rail at 600 Ω load and about 80 mA typical drive. |
| 2 | Inverting input 1 | input | Inverting input of amplifier 1; common mode range extends 200 mV beyond the supplies at 25 °C and differential input voltage is limited to ±1 V. |
| 3 | Non-inverting input 1 | input | Non-inverting input of amplifier 1; common mode range extends 200 mV beyond the supplies at 25 °C and differential input voltage is limited to ±1 V. |
| 4 | VDD | power_in | Negative supply (ground reference, VDD = 0 V in the specifications) for both amplifiers. |
| 5 | Non-inverting input 2 | input | Non-inverting input of amplifier 2; common mode range extends 200 mV beyond the supplies at 25 °C and differential input voltage is limited to ±1 V. |
| 6 | Inverting input 2 | input | Inverting input of amplifier 2; common mode range extends 200 mV beyond the supplies at 25 °C and differential input voltage is limited to ±1 V. |
| 7 | Output 2 | output | Output of amplifier 2, rail-to-rail with output swing within 100 mV of each rail at 600 Ω load and about 80 mA typical drive. |
| 8 | VCC | power_in | Positive supply, operating range 2.5 V to 6 V with 7 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | Vio | 0.2 | 3 | mV | VCC = +3 V; Vicm = Vout = VCC /2 | 5 | |
| Input offset voltage over temperature | Vio | 6 | mV | VCC = +3 V; Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Input offset current | Iio | 3 | 30 | nA | VCC = +3 V; Vicm = Vout = VCC /2 | 5 | |
| Input offset current over temperature | Iio | 60 | nA | VCC = +3 V; Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Input bias current | Iib | 40 | 125 | nA | VCC = +3 V; Vicm = Vout = VCC /2 (1) | 5 | |
| Input bias current over temperature | Iib | 150 | nA | VCC = +3 V; Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Common mode rejection ratio | CMR | 60 | 80 | dB | VCC = +3 V; 0 ≤ Vicm ≤ VCC, Vout = VCC /2 | 5 | |
| Large signal voltage gain (RL = 2 kΩ) | Avd | 80 | 92 | VCC = +3 V; Vout = 0.5 V to 2.5 V, RL = 2 kΩ | 5 | ||
| Large signal voltage gain (RL = 600 Ω) | Avd | 74 | 95 | VCC = +3 V; Vout = 0.5 V to 2.5 V, RL = 600 Ω | 5 | ||
| High level output voltage (RL = 2 kΩ) | VOH | 2.82 | 2.95 | V | VCC = +3 V; Vid = 100 mV, RL = 2 kΩ | 5 | |
| High level output voltage (RL = 600 Ω) | VOH | 2.8 | 2.95 | V | VCC = +3 V; Vid = 100 mV, RL = 600 Ω | 5 | |
| High level output voltage over temperature (RL = 2 kΩ) | VOH | 2.82 | V | VCC = +3 V; Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ | 5 | ||
| High level output voltage over temperature (RL = 600 Ω) | VOH | 2.8 | V | VCC = +3 V; Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 600 Ω | 5 | ||
| Low level output voltage (RL = 2 kΩ) | VOL | 88 | 120 | mV | VCC = +3 V; Vid = -100 mV, RL = 2 kΩ | 5 | |
| Low level output voltage (RL = 600 Ω) | VOL | 115 | 160 | mV | VCC = +3 V; Vid = -100 mV, RL = 600 Ω | 5 | |
| Low level output voltage over temperature (RL = 2 kΩ) | VOL | 120 | mV | VCC = +3 V; Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ | 5 | ||
| Low level output voltage over temperature (RL = 600 Ω) | VOL | 160 | mV | VCC = +3 V; Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 600 Ω | 5 | ||
| Output source current | Io | 20 | 80 | mA | VCC = +3 V; Vid = 100 mV, VO = VDD | 5 | |
| Output sink current | Io | 20 | 80 | mA | VCC = +3 V; Vid = -100 mV, VO = VCC | 5 | |
| Supply current (per amplifier) | ICC | 420 | 650 | µA | VCC = +3 V; AVCL = 1, no load | 5 | |
| Supply current (per amplifier) over temperature | ICC | 690 | µA | VCC = +3 V; Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Gain bandwidth product | GBP | 1 | 1.3 | MHz | VCC = +3 V; RL = 10 kΩ, CL = 100 pF, f = 100 kHz | 5 | |
| Slew rate | SR | 0.42 | 0.6 | V/µs | VCC = +3 V; RL = 10 kΩ, CL = 100 pF | 5 | |
| Input offset voltage | Vio | 0.2 | 3 | mV | VCC = +5 V; Vicm = Vout = VCC /2 | 6 | |
| Input offset voltage over temperature | Vio | 6 | mV | VCC = +5 V; Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input offset current | Iio | 3 | 30 | nA | VCC = +5 V; Vicm = Vout = VCC /2 (1) | 6 | |
| Input offset current over temperature | Iio | 60 | nA | VCC = +5 V; Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input bias current | Iib | 70 | 130 | nA | VCC = +5 V; Vicm = Vout = VCC /2 (1) | 6 | |
| Input bias current over temperature | Iib | 150 | nA | VCC = +5 V; Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Common mode rejection ratio | CMR | 65 | 85 | dB | VCC = +5 V; 0 ≤ Vicm ≤ VCC, Vout = VCC /2 | 6 | |
| Supply voltage rejection ratio | SVR | 70 | 90 | VCC = 2.5 V to 5 V | 6 | ||
| Large signal voltage gain (RL = 2 kΩ) | Avd | 83 | 92 | VCC = +5 V; Vout = 0.5 V to 4.5 V, RL = 2 kΩ | 6 | ||
| Large signal voltage gain (RL = 600 Ω) | Avd | 77 | 85 | VCC = +5 V; Vout = 0.5 V to 4.5 V, RL = 600 Ω | 6 | ||
| High level output voltage (RL = 2 kΩ) | VOH | 4.8 | 4.95 | V | VCC = +5 V; Vid = 100 mV, RL = 2 kΩ | 6 | |
| High level output voltage (RL = 600 Ω) | VOH | 4.75 | 4.9 | V | VCC = +5 V; Vid = 100 mV, RL = 600 Ω | 6 | |
| High level output voltage over temperature (RL = 2 kΩ) | VOH | 4.8 | V | VCC = +5 V; Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ | 6 | ||
| High level output voltage over temperature (RL = 600 Ω) | VOH | 4.75 | V | VCC = +5 V; Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 600 Ω | 6 | ||
| Low level output voltage (RL = 2 kΩ) | VOL | 88 | 130 | mV | VCC = +5 V; Vid = -100 mV, RL = 2 kΩ | 6 | |
| Low level output voltage (RL = 600 Ω) | VOL | 115 | 188 | mV | VCC = +5 V; Vid = -100 mV, RL = 600 Ω | 6 | |
| Low level output voltage over temperature (RL = 2 kΩ) | VOL | 130 | mV | VCC = +5 V; Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ | 6 | ||
| Low level output voltage over temperature (RL = 600 Ω) | VOL | 188 | mV | VCC = +5 V; Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 600 Ω | 6 | ||
| Output source current | Io | 20 | 80 | mA | VCC = +5 V; Vid = 100 mV, VO = VDD | 6 | |
| Output sink current | Io | 20 | 80 | mA | VCC = +5 V; Vid = -100 mV, VO = VCC | 6 | |
| Supply current (per amplifier) | ICC | 500 | 835 | µA | VCC = +5 V; AVCL = 1, no load | 6 | |
| Supply current (per amplifier) over temperature | ICC | 875 | µA | VCC = +5 V; Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Gain bandwidth product | GBP | 1 | 1.4 | MHz | VCC = +5 V; RL = 10 kΩ, CL = 100 pF, f = 100 kHz | 6 | |
| Slew rate | SR | 0.42 | 0.6 | V/µs | VCC = +5 V; RL = 10 kΩ, CL = 100 pF | 6 | |
| Supply voltage | VCC | 7 | V | Absolute maximum; voltage values except differential are with respect to network terminal | 3 | ||
| Differential input voltage | Vid | -1 | 1 | V | Printed ±1; if Vid > ±1 V input current must not exceed ±1 mA | 3 | |
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Maximum junction temperature | Tj | 150 | °C | 3 | |||
| ESD human body model (HBM) | 2 | kV | Human body model, 100 pF through 1.5 kΩ | 3 | |||
| ESD machine model (MM) | 200 | V | Machine model, 200 pF | 3 | |||
| ESD charged device model (CDM) | 1.5 | kV | Charged device model | 3 | |||
| Lead temperature (soldering) | 250 | °C | Soldering, 10 s | 3 | |||
| Supply voltage (operating) | VCC | 2.5 | 6 | V | 4 | ||
| Operating free air temperature range | Toper | -40 | 125 | °C | 4 | ||
| Thermal resistance junction-to-ambient (TSSOP8) | Rthja | 120 | °C/W | Typical value per note 3 | 3 | ||
| Thermal resistance junction-to-case (TSSOP8) | Rthjc | 37 | °C/W | Typical value per note 3 | 3 |
CAD (KiCad official)
- Symbol:
TSV358IYPT - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tsv358iypt-etched.step/tsv358iypt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsv358iypt.step/tsv358iypt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (21 pp, sha256
21a84d3a9300848f, retrieved 2026-10-21, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).