component
TSU101RICT
Public Made by Adomby adom
STMicroelectronics Operational Amplifier, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTSU101RICT
STMicroelectronics · Operational Amplifier · SC-70-5
TSU101RICT from STMicroelectronics, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, rail-to-rail, with 5 mA typ sink/source at 1.8 V and output within 40 mV max of the rails at RL = 100 kΩ. |
| 2 | VCC- | power_in | Negative supply terminal (ground in single-supply use); supply range VCC is 1.5 V to 5.5 V, absolute maximum 6 V. |
| 3 | IN+ | input | Non-inverting input, rail-to-rail with common mode range (VCC-) - 0.1 V to (VCC+) + 0.1 V; input current must be limited to 10 mA. |
| 4 | IN- | input | Inverting input, rail-to-rail with common mode range (VCC-) - 0.1 V to (VCC+) + 0.1 V; input current must be limited to 10 mA. |
| 5 | VCC+ | power_in | Positive supply terminal, 1.5 V to 5.5 V operating, 6 V absolute maximum; a 10 nF decoupling capacitor close to the pin is advised. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TSU101RICT - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
tsu101rict-etched.step/tsu101rict-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsu101rict.step/tsu101rict.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (33 pp, sha256
a047c99487c5cc77, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).