component
TSC2011IDT
Public Made by Adomby adom
STMicroelectronics Precision OpAmps, SO-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTSC2011IDT
STMicroelectronics · Precision OpAmps · SO-8
TSC2011IDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Negative current-sense input. Connect to one side of the external shunt resistor. Common-mode range -20 V to +70 V (absolute max -25 V to 76 V); differential (IN+ - IN-) up to 7 V; input bias current typ. 100 uA. |
| 2 | GND | power_in | Device ground / network ground return. All voltages (except the differential input voltage) are referenced to this pin. |
| 3 | VREF2 | input | Reference voltage 2. Sets the output-offset (zero-current) level together with VREF1; usable range 0 V to VCC. Tie both VREF1/VREF2 together for a single reference, or drive independently for ratiometric offset. |
| 4 | SHDN | input | Shutdown input, active high. VIH >= 0.7VCC enters shutdown (ICC typ. 20 uA); VIL <= 0.3VCC enables the amplifier. Internal pull-down keeps the device enabled if left floating. Turn-on time typ. 6 us, turn-off typ. 4 us (TSC2011). |
| 5 | OUT | output | Amplifier output. Vout = 60 * Vsense + Vref (TSC2011 gain 60 V/V). Sources typ. 10 mA / sinks typ. 20 mA; output swings to within ~15 mV of VCC and ~12 mV of GND. High-Z in shutdown (typ. 50 nA leakage). |
| 6 | VCC | power_in | Supply voltage input. Operating range 2.7 V to 5.5 V (absolute max 7 V). Typical ICC 1.5-1.6 mA active, 20 uA in shutdown. Decouple locally to GND. |
| 7 | VREF1 | input | Reference voltage 1. Sets the output-offset (zero-current) level together with VREF2; usable range 0 V to VCC. For a mid-supply bidirectional zero, drive VREF1/VREF2 with VCC/2. |
| 8 | IN+ | input | Positive current-sense input. Connect to the other side of the external shunt resistor. Common-mode range -20 V to +70 V (absolute max -25 V to 76 V); input bias current typ. 350 uA at Vicm = 12 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
TSC2011IDT
CAD (KiCad official)
- Symbol:
TSC2011IDT - Footprint:
Package_SO:TI_SO-PowerPAD-8 - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
tsc2011idt-etched.step/tsc2011idt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsc2011idt.step/tsc2011idt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (54 pp, sha256
2dca11bf3bf7db63, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).