component
TSC1031IDT
Public Made by Adomby adom
STMicroelectronics Current Sense Amplifiers, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTSC1031IDT
STMicroelectronics · Current Sense Amplifiers · SO-8
TSC1031IDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vm | input | Sense resistor connection where the measured current exits the shunt on the Vm side; absolute maximum -16 to 75 V relative to Vcc-. |
| 2 | A1 | output | Connection to the output resistor Rf3, which is connected between A1 and Gnd to balance the input filter resistors; absolute maximum -0.3 V to Vcc+ + 0.3 V. |
| 3 | SEL | input | Gain-select digital input: Gnd gives 50 V/V and Vcc+ gives 100 V/V, with VIL max 0.5 V and VIH min 1.2 V. |
| 4 | Out | output | Analog output voltage proportional to the sense voltage Vp-Vm; absolute maximum -0.3 V to Vcc+ + 0.3 V, short-circuit current 15 mA min. |
| 5 | Vcc+ | power_in | Positive power supply line, 2.7 to 5.5 V in single-supply configuration with an absolute maximum of 7 V. |
| 6 | Gnd | power_in | Ground line, which is the reference for the SEL, A1, Out and Vcc+ voltage limits. |
| 7 | Vcc- | power_in | Negative power supply line, connected to Gnd in single-supply configuration or to -8 to 0 V (Vcc+ = 5.5 V max) in dual-supply configuration; Vcc+ - Vcc- is limited to 15 V. |
| 8 | Vp | input | Sense resistor connection where the measured current enters the shunt on the Vp side; absolute maximum -16 to 75 V relative to Vcc-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TSC1031IDT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
tsc1031idt-etched.step/tsc1031idt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsc1031idt.step/tsc1031idt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (26 pp, sha256
a95dbff886269326, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).