Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TSB712IDT

STMicroelectronics · Operational Amplifier · SOIC-8

TSB712IDT from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of amplifier channel 1, which the datasheet describes as rail-to-rail output.
2 IN1- input Inverting input of channel 1; the input common-mode range is (VCC-) to (VCC+) + 0.1 V.
3 IN1+ input Non-inverting input of channel 1; the input common-mode range is (VCC-) to (VCC+) + 0.1 V, and the input is protected by ESD diodes to each supply rail.
4 VCC- power_in Negative supply voltage; the supply span (VCC+ minus VCC-) is 2.7 V to 36 V.
5 IN2+ input Non-inverting input of channel 2; the input common-mode range is (VCC-) to (VCC+) + 0.1 V, and the input is protected by ESD diodes to each supply rail.
6 IN2- input Inverting input of channel 2; the input common-mode range is (VCC-) to (VCC+) + 0.1 V.
7 OUT2 output Output of amplifier channel 2, which the datasheet describes as rail-to-rail output.
8 VCC+ power_in Positive supply voltage; the device operates from 2.7 V to 36 V single supply or ±1.35 V to ±18 V dual supplies.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VCC 40 V Printed as +40 or ±20 V (single or dual supply) 4
Input voltage differential Vid -2 2 V Footnote 2: may be extended if input current limited to ±10 mA 4
Input current Iin -10 10 mA Footnote 3: input current must be resistor-limited when input is beyond the rails 4
Storage temperature -65 150 °C 4
Maximum junction temperature Tj 150 °C 4
ESD human body model (HBM) 2 kV JEDEC JESD22-A114F 4
ESD charged device model (CDM) 1 kV ANSI/ESD STM5.3.1 4
Supply voltage (operating) VCC 2.7 36 V 4
Operating free air temperature range Toper -40 125 °C 4
Input offset voltage Vio -800 800 µV VCC=36 V; TSB711, TSB712, T = 25 °C, VCC- ≤ VICM ≤ VCC+ -1.5 V 5
Input offset voltage Vio -1200 1200 µV VCC=36 V; TSB711, TSB712, T = 25 °C, VCC- ≤ VICM ≤ VCC+ 5
Input offset voltage Vio -1100 1100 µV VCC=36 V; TSB711, TSB712, -40 °C < T < 125 °C, VCC- ≤ VICM ≤ VCC+ - 1.5 V 5
Input offset voltage Vio -1400 1400 µV VCC=36 V; TSB711, TSB712, -40 °C < T < 125 °C, VCC- ≤ VICM ≤ VCC+ 5
Input offset voltage drift ΔVio / ΔT 2.8 µV / °C VCC=36 V; -40 °C < T < 125 °C; maximum per Section 5.4 5
Input bias current IIB 0 300 nA VCC=36 V; VICM = VCC+, T = 25 °C 5
Input bias current IIB 0 900 nA VCC=36 V; VICM = VCC+, -40 °C < T < 125 °C 5
Input bias current IIB -100 0 nA VCC=36 V; VICM = VCC-, T = 25 °C 5
Input bias current IIB -200 0 nA VCC=36 V; VICM = VCC-, -40 °C < T < 125 °C 5
Input offset current IIO 10 nA VCC=36 V; VICM = VCC+ (value printed without limit label; assigned to max) 5
Open loop gain AVD 110 125 dB VCC=36 V; RL ≥ 10 kΩ, (VCC-) + 0.5 V ≤ VOUT ≤ (VCC+) - 0.5 V, T = 25 °C 5
Open loop gain AVD 105 dB VCC=36 V; RL ≥ 10 kΩ, (VCC-) + 0.5 V ≤ VOUT ≤ (VCC+) - 0.5 V, -40 °C < T < 125 °C 5
Common-mode rejection ratio CMR 115 130 dB VCC=36 V; (VCC-) ≤ VICM ≤ (VCC+) - 1.5 V, T = 25 °C 5
Common-mode rejection ratio CMR 110 dB VCC=36 V; (VCC-) ≤ VICM ≤ (VCC+) - 1.5 V, -40 °C < T < 125 °C 5
Common-mode rejection ratio CMR 90 120 dB VCC=36 V; TSB711, TSB712 (VCC-) ≤ VICM ≤ (VCC+), T = 25 °C 6
Common-mode rejection ratio CMR 85 dB VCC=36 V; TSB711, TSB712 (VCC-) ≤ VICM ≤ (VCC+), -40 °C < T < 125 °C 6
Power supply rejection ratio SVR 100 125 dB VCC=36 V; 5 V < (VCC+) - (VCC-) < 36 V, VICM = VCC / 2, -40 °C < T < 125 °C 6
High level output voltage (drop voltage from VCC+) VOH 120 mV VCC=36 V; No load, -40 °C < T < 125 °C 6
High level output voltage (drop voltage from VCC+) VOH 200 mV VCC=36 V; ISOURCE = 2 mA, -40 °C < T < 125 °C 6
High level output voltage (drop voltage from VCC+) VOH 1000 mV VCC=36 V; ISOURCE = 15 mA, -40 °C < T < 125 °C 6
Low level output voltage VOL 120 mV VCC=36 V; No load, -40 °C < T < 125 °C 6
Low level output voltage VOL 200 mV VCC=36 V; ISINK = 2 mA, -40 °C < T < 125 °C 6
Low level output voltage VOL 1000 mV VCC=36 V; ISINK = 15 mA, -40 °C < T < 125 °C 6
Output sink current ISINK 25 50 mA VCC=36 V; VOUT = VCC, T = 25 °C 6
Output sink current ISINK 20 mA VCC=36 V; VOUT = VCC, -40 °C < T < 125 °C 6
Output source current ISOURCE 25 50 mA VCC=36 V; VOUT = 0 V, T = 25 °C 6
Output source current ISOURCE 20 mA VCC=36 V; VOUT = 0 V, -40 °C < T < 125 °C 6
Supply current by op-amp ICC 1.8 mA VCC=36 V; No load, T = 25 °C 6
Supply current by op-amp ICC 3 mA VCC=36 V; No load, -40 °C < T < 125 °C 6
Gain bandwidth product GBP 4.5 6 MHz VCC=36 V; RL = 10 kΩ, CL = 100 pF 6
Slew rate SR 2.2 3 V / µs VCC=36 V; 9 V step, RL = 10 kΩ, CL = 100 pF, AV = 1 V/V, 10% to 90% 6
Input offset voltage Vio -800 800 µV VCC=5 V; TSB711, TSB712, T = 25 °C, VCC- ≤ VICM ≤ VCC+ - 1.5 V 8
Input offset voltage Vio -1200 1200 µV VCC=5 V; TSB711, TSB712, T = 25 °C, VCC- ≤ VICM ≤ VCC+ 8
Input offset voltage Vio -1100 1100 µV VCC=5 V; TSB711, TSB712, -40 °C < T < 125 °C, VCC- ≤ VICM ≤ VCC+ - 1.5 V 8
Input offset voltage Vio -1400 1400 µV VCC=5 V; TSB711, TSB712, -40 °C < T < 125 °C, VCC- ≤ VICM ≤ VCC+ 8
Input offset voltage drift ΔVio / ΔT 4 µV / °C VCC=5 V; -40 °C < T < 125 °C; maximum per Section 5.4 8
Open loop gain AVD 105 120 dB VCC=5 V; RL ≥ 10 kΩ, (VCC-) + 0.5 V ≤ VOUT ≤ (VCC+) - 0.5 V, T = 25 °C 8
Open loop gain AVD 100 dB VCC=5 V; RL ≥ 10 kΩ, (VCC-) + 0.5 V ≤ VOUT ≤ (VCC+) - 0.5 V, -40 °C < T < 125 °C 8
Common-mode rejection ratio CMR 95 125 dB VCC=5 V; (VCC-) ≤ VICM ≤ (VCC+) - 1.5 V, T = 25 °C 8
Common-mode rejection ratio CMR 90 dB VCC=5 V; (VCC-) ≤ VICM ≤ (VCC+) - 1.5 V, -40 °C < T < 125 °C 8
Common-mode rejection ratio CMR 75 105 dB VCC=5 V; TSB711, TSB712 (VCC-) ≤ VICM ≤ (VCC+), T = 25 °C 8
Common-mode rejection ratio CMR 70 dB VCC=5 V; TSB711, TSB712 (VCC-) ≤ VICM ≤ (VCC+), -40 °C < T < 125 °C 9
High level output voltage (drop voltage from VCC+) VOH 90 mV VCC=5 V; No load, -40 °C < T < 125 °C 9
High level output voltage (drop voltage from VCC+) VOH 200 mV VCC=5 V; ISOURCE = 2 mA, -40 °C < T < 125 °C 9
Low level output voltage VOL 90 mV VCC=5 V; No load, -40 °C < T < 125 °C 9
Low level output voltage VOL 200 mV VCC=5 V; ISINK = 2 mA, -40 °C < T < 125 °C 9
Supply current by op-amp ICC 1.4 mA VCC=5 V; No load, T = 25 °C 9
Supply current by op-amp ICC 2.3 mA VCC=5 V; No load, -40 °C < T < 125 °C 9
Gain bandwidth product GBP 4.5 6 MHz VCC=5 V; RL = 10 kΩ, CL = 100 pF 9
Slew rate SR 2 2.7 V / µs VCC=5 V; 3 V step, RL = 10 kΩ, CL = 100 pF, AV = 1 V/V, 10% to 90% 9

CAD (KiCad official)

  • Symbol: TSB712IDT
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tsb712idt-etched.step / tsb712idt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tsb712idt.step / tsb712idt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (36 pp, sha256 5e003e851d32ff54, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF