main
Ray
Publish 0.1.0
63ee16f
TSB571IYLT
STMicroelectronics · Operational Amplifier · SOT-23-5
TSB571IYLT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output channel of the amplifier; it swings rail-to-rail, with the output voltage drop from VCC+ and VCC- given in the electrical characteristics tables (Tables 5 to 7). |
| 2 | VCC- | power_in | Negative supply voltage; the device operates from a 4 V to 36 V supply (VCC), with absolute maximum VCC of 40 V. |
| 3 | IN+ | input | Non-inverting input channel; the common-mode input range is (VCC-) - 0.1 V to (VCC+) + 0.1 V, and the input voltage must stay within (VCC-) - 0.2 V to (VCC+) + 0.2 V (absolute maximum). |
| 4 | IN- | input | Inverting input channel with the same input voltage limits as the non-inverting input; if the input exceeds a supply rail by 0.2 V, the input current must be limited to 10 mA by a series resistor. |
| 5 | VCC+ | power_in | Positive supply voltage; the device operates from a 4 V to 36 V supply (VCC), with absolute maximum VCC of 40 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (25 °C) | Vio | -1.5 | 0.1 | 1.5 | mV | Vcc=36V | 9 |
| Input offset voltage (over temperature) | Vio | -2.1 | 2.1 | mV | Vcc=36V; -40 °C < T < 125 °C | 9 | |
| Input offset voltage drift | ΔVio/ΔT | 1.5 | 6 | μV/°C | Vcc=36V; -40 °C < T < 125 °C | 9 | |
| Input offset current (25 °C) | Iio | 2 | 15 | nA | Vcc=36V | 9 | |
| Input offset current (over temperature) | Iio | 35 | nA | Vcc=36V; -40 °C < T < 125 °C | 9 | ||
| Input bias current (25 °C) | Iib | 8 | 30 | nA | Vcc=36V | 9 | |
| Input bias current (over temperature) | Iib | 70 | nA | Vcc=36V; -40 °C < T < 125 °C | 9 | ||
| Common mode rejection ratio (25 °C) | CMR | 105 | 129 | dB | Vcc=36V; Vicm = (VCC-) to (VCC+) - 1.5 V, Vout = VCC/2 | 9 | |
| Common mode rejection ratio (over temperature) | CMR | 95 | dB | Vcc=36V; -40 °C < T < 125 °C | 9 | ||
| Common mode rejection ratio (25 °C, full Vicm range) | CMR | 95 | 115 | dB | Vcc=36V; Vicm = (VCC-) to (VCC+), Vout = VCC/2 | 9 | |
| Common mode rejection ratio (over temperature, full Vicm range) | CMR | 90 | dB | Vcc=36V; -40 °C < T < 125 °C | 9 | ||
| Supply voltage rejection ratio (25 °C) | SVR | 90 | 104 | dB | Vcc=36V; VCC = 4 to 36 V | 9 | |
| Supply voltage rejection ratio (over temperature) | SVR | 85 | dB | Vcc=36V; -40 °C < T < 125 °C | 9 | ||
| Large signal voltage gain (25 °C) | Avd | 95 | 114 | dB | Vcc=36V; RL= 10 kΩ, Vout = 0.5 to 35.5 V | 9 | |
| Large signal voltage gain (over temperature) | Avd | 90 | dB | Vcc=36V; -40 °C < T < 125 °C | 9 | ||
| High level output voltage, drop from VCC+ (25 °C) | VOH | 78 | 150 | mV | Vcc=36V; RL = 10 kΩ | 9 | |
| High level output voltage, drop from VCC+ (over temperature) | VOH | 200 | mV | Vcc=36V; -40 °C < T < 125 °C | 9 | ||
| Low level output voltage (25 °C) | VOL | 30 | 90 | mV | Vcc=36V; RL = 10 kΩ | 9 | |
| Low level output voltage (over temperature) | VOL | 120 | mV | Vcc=36V; -40 °C < T < 125 °C | 9 | ||
| Output sink current (25 °C) | Isink | 25 | 65 | mA | Vcc=36V; Vout = VCC | 9 | |
| Output sink current (over temperature) | Isink | 10 | mA | Vcc=36V; -40 °C < T < 125 °C | 9 | ||
| Output source current (25 °C) | Isource | 20 | 50 | mA | Vcc=36V; Vout = 0 V | 9 | |
| Output source current (over temperature) | Isource | 10 | mA | Vcc=36V; -40 °C < T < 125 °C | 9 | ||
| Supply current per channel (25 °C) | ICC | 380 | 470 | μA | Vcc=36V; No load, Vout = VCC/2 | 9 | |
| Supply current per channel (over temperature) | ICC | 550 | μA | Vcc=36V; -40 °C < T < 125 °C | 9 | ||
| Gain bandwidth product (25 °C) | GBP | 1.7 | 2.5 | MHz | Vcc=36V; RL = 10 kΩ, CL = 100 pF | 9 | |
| Gain bandwidth product (over temperature) | GBP | 1.4 | MHz | Vcc=36V; -40 °C < T < 125 °C | 9 | ||
| Negative slew rate (25 °C) | SR | 0.57 | 0.88 | V/μs | Vcc=36V; Vin = 22.5 to 13.5 V, Av = 1, 10 % to 90 %, RL = 10 kΩ, CL = 100 pF | 9 | |
| Negative slew rate (over temperature) | SR | 0.44 | V/μs | Vcc=36V; -40 °C < T < 125 °C | 9 | ||
| Positive slew rate (25 °C) | SR | 0.6 | 1 | V/μs | Vcc=36V; Vin = 13.5 to 22.5 V, Av = 1, 10 % to 90 %, RL = 10 kΩ, CL = 100 pF | 10 | |
| Positive slew rate (over temperature) | SR | 0.44 | V/μs | Vcc=36V; -40 °C < T < 125 °C | 10 | ||
| Supply voltage | VCC | 40 | V | 4 | |||
| Differential input voltage | Vid | -1 | 1 | V | 4 | ||
| Input current | Iin | 10 | mA | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Maximum junction temperature | Tj | 150 | °C | 4 | |||
| ESD human body model (HBM) | 4 | kV | 4 | ||||
| ESD machine model (MM) | 100 | V | 4 | ||||
| ESD charged device model (CDM) | 1.5 | kV | 4 | ||||
| Supply voltage (operating) | VCC | 4 | 36 | V | 4 | ||
| Operating free-air temperature range | Toper | -40 | 125 | °C | 4 | ||
| Thermal resistance junction to ambient (SOT23-5) | Rthja | 250 | °C/W | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | The copper traces that connect the output pins to the load and supply pins should be as wide as possible to | 19 |
CAD (KiCad official)
- Symbol:
TSB571IYLT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tsb571iylt-etched.step/tsb571iylt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsb571iylt.step/tsb571iylt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (30 pp, sha256
7a6fa0e03464fe23, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TSB571IYLT
**STMicroelectronics** · Operational Amplifier · SOT-23-5
TSB571IYLT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output channel of the amplifier; it swings rail-to-rail, with the output voltage drop from VCC+ and VCC- given in the electrical characteristics tables (Tables 5 to 7). |
| 2 | VCC- | power_in | Negative supply voltage; the device operates from a 4 V to 36 V supply (VCC), with absolute maximum VCC of 40 V. |
| 3 | IN+ | input | Non-inverting input channel; the common-mode input range is (VCC-) - 0.1 V to (VCC+) + 0.1 V, and the input voltage must stay within (VCC-) - 0.2 V to (VCC+) + 0.2 V (absolute maximum). |
| 4 | IN- | input | Inverting input channel with the same input voltage limits as the non-inverting input; if the input exceeds a supply rail by 0.2 V, the input current must be limited to 10 mA by a series resistor. |
| 5 | VCC+ | power_in | Positive supply voltage; the device operates from a 4 V to 36 V supply (VCC), with absolute maximum VCC of 40 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (25 °C) | Vio | -1.5 | 0.1 | 1.5 | mV | Vcc=36V | 9 |
| Input offset voltage (over temperature) | Vio | -2.1 | | 2.1 | mV | Vcc=36V; -40 °C < T < 125 °C | 9 |
| Input offset voltage drift | ΔVio/ΔT | | 1.5 | 6 | μV/°C | Vcc=36V; -40 °C < T < 125 °C | 9 |
| Input offset current (25 °C) | Iio | | 2 | 15 | nA | Vcc=36V | 9 |
| Input offset current (over temperature) | Iio | | | 35 | nA | Vcc=36V; -40 °C < T < 125 °C | 9 |
| Input bias current (25 °C) | Iib | | 8 | 30 | nA | Vcc=36V | 9 |
| Input bias current (over temperature) | Iib | | | 70 | nA | Vcc=36V; -40 °C < T < 125 °C | 9 |
| Common mode rejection ratio (25 °C) | CMR | 105 | 129 | | dB | Vcc=36V; Vicm = (VCC-) to (VCC+) - 1.5 V, Vout = VCC/2 | 9 |
| Common mode rejection ratio (over temperature) | CMR | 95 | | | dB | Vcc=36V; -40 °C < T < 125 °C | 9 |
| Common mode rejection ratio (25 °C, full Vicm range) | CMR | 95 | 115 | | dB | Vcc=36V; Vicm = (VCC-) to (VCC+), Vout = VCC/2 | 9 |
| Common mode rejection ratio (over temperature, full Vicm range) | CMR | 90 | | | dB | Vcc=36V; -40 °C < T < 125 °C | 9 |
| Supply voltage rejection ratio (25 °C) | SVR | 90 | 104 | | dB | Vcc=36V; VCC = 4 to 36 V | 9 |
| Supply voltage rejection ratio (over temperature) | SVR | 85 | | | dB | Vcc=36V; -40 °C < T < 125 °C | 9 |
| Large signal voltage gain (25 °C) | Avd | 95 | 114 | | dB | Vcc=36V; RL= 10 kΩ, Vout = 0.5 to 35.5 V | 9 |
| Large signal voltage gain (over temperature) | Avd | 90 | | | dB | Vcc=36V; -40 °C < T < 125 °C | 9 |
| High level output voltage, drop from VCC+ (25 °C) | VOH | | 78 | 150 | mV | Vcc=36V; RL = 10 kΩ | 9 |
| High level output voltage, drop from VCC+ (over temperature) | VOH | | | 200 | mV | Vcc=36V; -40 °C < T < 125 °C | 9 |
| Low level output voltage (25 °C) | VOL | | 30 | 90 | mV | Vcc=36V; RL = 10 kΩ | 9 |
| Low level output voltage (over temperature) | VOL | | | 120 | mV | Vcc=36V; -40 °C < T < 125 °C | 9 |
| Output sink current (25 °C) | Isink | 25 | 65 | | mA | Vcc=36V; Vout = VCC | 9 |
| Output sink current (over temperature) | Isink | 10 | | | mA | Vcc=36V; -40 °C < T < 125 °C | 9 |
| Output source current (25 °C) | Isource | 20 | 50 | | mA | Vcc=36V; Vout = 0 V | 9 |
| Output source current (over temperature) | Isource | 10 | | | mA | Vcc=36V; -40 °C < T < 125 °C | 9 |
| Supply current per channel (25 °C) | ICC | | 380 | 470 | μA | Vcc=36V; No load, Vout = VCC/2 | 9 |
| Supply current per channel (over temperature) | ICC | | | 550 | μA | Vcc=36V; -40 °C < T < 125 °C | 9 |
| Gain bandwidth product (25 °C) | GBP | 1.7 | 2.5 | | MHz | Vcc=36V; RL = 10 kΩ, CL = 100 pF | 9 |
| Gain bandwidth product (over temperature) | GBP | 1.4 | | | MHz | Vcc=36V; -40 °C < T < 125 °C | 9 |
| Negative slew rate (25 °C) | SR | 0.57 | 0.88 | | V/μs | Vcc=36V; Vin = 22.5 to 13.5 V, Av = 1, 10 % to 90 %, RL = 10 kΩ, CL = 100 pF | 9 |
| Negative slew rate (over temperature) | SR | 0.44 | | | V/μs | Vcc=36V; -40 °C < T < 125 °C | 9 |
| Positive slew rate (25 °C) | SR | 0.6 | 1 | | V/μs | Vcc=36V; Vin = 13.5 to 22.5 V, Av = 1, 10 % to 90 %, RL = 10 kΩ, CL = 100 pF | 10 |
| Positive slew rate (over temperature) | SR | 0.44 | | | V/μs | Vcc=36V; -40 °C < T < 125 °C | 10 |
| Supply voltage | VCC | | | 40 | V | | 4 |
| Differential input voltage | Vid | -1 | | 1 | V | | 4 |
| Input current | Iin | | | 10 | mA | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Maximum junction temperature | Tj | | | 150 | °C | | 4 |
| ESD human body model (HBM) | | | | 4 | kV | | 4 |
| ESD machine model (MM) | | | | 100 | V | | 4 |
| ESD charged device model (CDM) | | | | 1.5 | kV | | 4 |
| Supply voltage (operating) | VCC | 4 | | 36 | V | | 4 |
| Operating free-air temperature range | Toper | -40 | | 125 | °C | | 4 |
| Thermal resistance junction to ambient (SOT23-5) | Rthja | | 250 | | °C/W | | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | The copper traces that connect the output pins to the load and supply pins should be as wide as possible to | 19 |
## CAD (KiCad official)
- Symbol: `TSB571IYLT`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tsb571iylt-etched.step` / `tsb571iylt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tsb571iylt.step` / `tsb571iylt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/tsb571iylt.pdf) (30 pp, sha256 `7a6fa0e03464fe23`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tsb571iylt-datasheet.pdf)