main
Ray
ts9511iylt: specified limits as data (metadata.characteristics, 60 rows from the datasheet)
a35ee9b
TS9511IYLT
STMicroelectronics · Precision Op Amps · SOT-23-5
TS9511IYLT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out | output | Rail-to-rail amplifier output with typical short-circuit current of 20 mA (10 mA min) at VCC = 3 V and 5 V. |
| 2 | VCC- | power_in | Negative supply (VDD, ground reference); total supply VCC range is 2.7 V to 12 V with 14 V absolute maximum. |
| 3 | IN+ | input | Non-inverting input, rail-to-rail with common-mode range VDD -0.2 V to VCC +0.2 V and differential voltage limited to ±1 V. |
| 4 | IN- | input | Inverting input, rail-to-rail with common-mode range VDD -0.2 V to VCC +0.2 V and differential voltage limited to ±1 V. |
| 5 | VCC+ | power_in | Positive supply with operating range 2.7 V to 12 V relative to VCC- and 14 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | Vio | 800 | µV | VCC=+3 V; Tamb=25 °C | 4 | ||
| Input offset voltage | Vio | 1500 | µV | VCC=+3 V; Tmin≤Tamb≤Tmax | 4 | ||
| Input offset current | Iio | 1 | 30 | nA | VCC=+3 V; Tamb=25 °C | 4 | |
| Input offset current | Iio | 80 | nA | VCC=+3 V; Tmin≤Tamb≤Tmax | 4 | ||
| Input bias current | Iib | 30 | 70 | nA | VCC=+3 V; Tamb=25 °C | 4 | |
| Input bias current | Iib | 150 | nA | VCC=+3 V; Tmin≤Tamb≤Tmax | 4 | ||
| Common mode rejection ratio | CMR | 60 | 90 | dB | VCC=+3 V; Tamb=25 °C | 4 | |
| Common mode rejection ratio | CMR | 55 | dB | VCC=+3 V; Tmin≤Tamb≤Tmax | 4 | ||
| Supply voltage rejection ratio | SVR | 65 | 90 | dB | VCC = 2.7 to 3.3 V; Tamb=25 °C | 4 | |
| Supply voltage rejection ratio | SVR | 60 | dB | VCC = 2.7 to 3.3 V; Tmin≤Tamb≤Tmax | 4 | ||
| Large signal voltage gain | Avd | 70 | 80 | Vo = 2 Vpk-pk, RL = 600 Ω; Tamb=25 °C | 4 | ||
| Large signal voltage gain | Avd | 65 | Vo = 2 Vpk-pk, RL = 600 Ω; Tmin≤Tamb≤Tmax | 4 | |||
| High level output voltage | VOH | 2.8 | 2.9 | V | RL = 600 Ω; Tamb=25 °C | 4 | |
| High level output voltage | VOH | 2.8 | V | RL = 600 Ω; Tmin≤Tamb≤Tmax | 4 | ||
| Low level output voltage | VOL | 80 | 250 | mV | RL = 600 Ω; Tamb=25 °C | 4 | |
| Low level output voltage | VOL | 250 | mV | RL = 600 Ω; Tmin≤Tamb≤Tmax | 4 | ||
| Output short-circuit current | Isc | 10 | 20 | mA | 4 | ||
| Supply current (per amplifier) | ICC | 0.8 | 1 | mA | VCC=+3 V; no load, Vicm = VCC/2; Tamb=25 °C | 4 | |
| Supply current (per amplifier) | ICC | 1.2 | mA | VCC=+3 V; no load, Vicm = VCC/2; Tmin≤Tamb≤Tmax | 4 | ||
| Input offset voltage | Vio | 800 | µV | VCC=+5 V; Tamb=25 °C | 5 | ||
| Input offset voltage | Vio | 1500 | µV | VCC=+5 V; Tmin≤Tamb≤Tmax | 5 | ||
| Input offset current | Iio | 1 | 30 | nA | VCC=+5 V; Vicm = VCC/2; Tamb=25 °C | 5 | |
| Input offset current | Iio | 80 | nA | VCC=+5 V; Vicm = VCC/2; Tmin≤Tamb≤Tmax | 5 | ||
| Input bias current | Iib | 30 | 70 | nA | VCC=+5 V; Tamb=25 °C | 5 | |
| Input bias current | Iib | 150 | nA | VCC=+5 V; Tmin≤Tamb≤Tmax | 5 | ||
| Common mode rejection ratio | CMR | 60 | 90 | dB | VCC=+5 V; Tamb=25 °C | 5 | |
| Common mode rejection ratio | CMR | 55 | dB | VCC=+5 V; Tmin≤Tamb≤Tmax | 5 | ||
| Supply voltage rejection ratio | SVR | 65 | 90 | dB | VCC = 4 to 5 V; Tamb=25 °C | 5 | |
| Supply voltage rejection ratio | SVR | 60 | dB | VCC = 4 to 5 V; Tmin≤Tamb≤Tmax | 5 | ||
| Large signal voltage gain | Avd | 75 | 86 | Vo = 2 Vpk-pk, RL = 600 Ω; Tamb=25 °C | 5 | ||
| Large signal voltage gain | Avd | 70 | Vo = 2 Vpk-pk, RL = 600 Ω; Tmin≤Tamb≤Tmax | 5 | |||
| High level output voltage | VOH | 4.7 | 4.8 | V | RL = 600 Ω; Tamb=25 °C | 5 | |
| High level output voltage | VOH | 4.7 | V | RL = 600 Ω; Tmin≤Tamb≤Tmax | 5 | ||
| Low level output voltage | VOL | 80 | 300 | mV | RL = 600 Ω; Tamb=25 °C | 5 | |
| Low level output voltage | VOL | 300 | mV | RL = 600 Ω; Tmin≤Tamb≤Tmax | 5 | ||
| Output short-circuit current | Isc | 10 | 20 | mA | 5 | ||
| Supply current (per amplifier) | ICC | 0.95 | 1.2 | mA | VCC=+5 V; no load, Vicm = VCC/2; Tamb=25 °C | 5 | |
| Supply current (per amplifier) | ICC | 1.3 | mA | VCC=+5 V; no load, Vicm = VCC/2; Tmin≤Tamb≤Tmax | 5 | ||
| Supply voltage | VCC | 2.7 | 12 | V | 3 | ||
| Operating free air temperature range | Toper | -40 | 125 | °C | 3 | ||
| Supply voltage | VCC | 14 | V | Voltages referenced to network ground | 3 | ||
| Differential input voltage | Vid | -1 | 1 | V | If Vid > ±1 V, max input current ±1 mA with series resistor | 3 | |
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Maximum junction temperature | Tj | 150 | °C | 3 | |||
| ESD HBM: human body model | HBM | 1 | kV | 100 pF through 1.5 kΩ | 3 | ||
| ESD MM: machine model | MM | 100 | V | 200 pF, no series resistor | 3 | ||
| ESD CDM: charged device model | CDM | 1.5 | kV | 3 | |||
| Latch-up immunity | 200 | mA | 3 | ||||
| Thermal resistance junction-to-ambient, SOT23-5 | Rthja | 250 | °C/W | Typical value | 3 | ||
| Thermal resistance junction-to-case, SOT23-5 | Rthjc | 81 | °C/W | Typical value | 3 | ||
| Input offset voltage drift | ΔVio/ΔT | 2 | µV/°C | 4 | |||
| Gain bandwidth product | GBP | 3 | MHz | RL = 10 kΩ, CL = 100 pF | 4 | ||
| Slew rate | SR | 1 | V/µs | RL = 10 kΩ, CL = 100 pF | 4 | ||
| Equivalent input noise voltage | en | 25 | nV/√Hz | f = 1 kHz | 4 | ||
| Total harmonic distortion | THD | 0.01 | % | Vout = 4 Vpk-pk, F = 10 kHz, AV = 2, RL = 10 kΩ | 4 | ||
| Input offset voltage drift | ΔVio/ΔT | 2 | µV/°C | 5 | |||
| Gain bandwidth product | GBP | 3 | MHz | RL = 10 kΩ, CL = 100 pF | 5 | ||
| Slew rate | SR | 1 | V/µs | RL = 10 kΩ, CL = 100 pF | 5 | ||
| Equivalent input noise voltage | en | 25 | nV/√Hz | f = 1 kHz | 5 | ||
| Total harmonic distortion | THD | 0.01 | % | Vout = 4 Vpk-pk, F = 10 kHz, AV = 2, RL = 10 kΩ | 5 |
CAD (KiCad official)
- Symbol:
TS9511IYLT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ts9511iylt-etched.step/ts9511iylt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts9511iylt.step/ts9511iylt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (11 pp, sha256
335dcfc50c3ea30a, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TS9511IYLT
**STMicroelectronics** · Precision Op Amps · SOT-23-5
TS9511IYLT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out | output | Rail-to-rail amplifier output with typical short-circuit current of 20 mA (10 mA min) at VCC = 3 V and 5 V. |
| 2 | VCC- | power_in | Negative supply (VDD, ground reference); total supply VCC range is 2.7 V to 12 V with 14 V absolute maximum. |
| 3 | IN+ | input | Non-inverting input, rail-to-rail with common-mode range VDD -0.2 V to VCC +0.2 V and differential voltage limited to ±1 V. |
| 4 | IN- | input | Inverting input, rail-to-rail with common-mode range VDD -0.2 V to VCC +0.2 V and differential voltage limited to ±1 V. |
| 5 | VCC+ | power_in | Positive supply with operating range 2.7 V to 12 V relative to VCC- and 14 V absolute maximum. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | Vio | | | 800 | µV | VCC=+3 V; Tamb=25 °C | 4 |
| Input offset voltage | Vio | | | 1500 | µV | VCC=+3 V; Tmin≤Tamb≤Tmax | 4 |
| Input offset current | Iio | | 1 | 30 | nA | VCC=+3 V; Tamb=25 °C | 4 |
| Input offset current | Iio | | | 80 | nA | VCC=+3 V; Tmin≤Tamb≤Tmax | 4 |
| Input bias current | Iib | | 30 | 70 | nA | VCC=+3 V; Tamb=25 °C | 4 |
| Input bias current | Iib | | | 150 | nA | VCC=+3 V; Tmin≤Tamb≤Tmax | 4 |
| Common mode rejection ratio | CMR | 60 | 90 | | dB | VCC=+3 V; Tamb=25 °C | 4 |
| Common mode rejection ratio | CMR | 55 | | | dB | VCC=+3 V; Tmin≤Tamb≤Tmax | 4 |
| Supply voltage rejection ratio | SVR | 65 | 90 | | dB | VCC = 2.7 to 3.3 V; Tamb=25 °C | 4 |
| Supply voltage rejection ratio | SVR | 60 | | | dB | VCC = 2.7 to 3.3 V; Tmin≤Tamb≤Tmax | 4 |
| Large signal voltage gain | Avd | 70 | 80 | | | Vo = 2 Vpk-pk, RL = 600 Ω; Tamb=25 °C | 4 |
| Large signal voltage gain | Avd | 65 | | | | Vo = 2 Vpk-pk, RL = 600 Ω; Tmin≤Tamb≤Tmax | 4 |
| High level output voltage | VOH | 2.8 | 2.9 | | V | RL = 600 Ω; Tamb=25 °C | 4 |
| High level output voltage | VOH | 2.8 | | | V | RL = 600 Ω; Tmin≤Tamb≤Tmax | 4 |
| Low level output voltage | VOL | | 80 | 250 | mV | RL = 600 Ω; Tamb=25 °C | 4 |
| Low level output voltage | VOL | | | 250 | mV | RL = 600 Ω; Tmin≤Tamb≤Tmax | 4 |
| Output short-circuit current | Isc | 10 | 20 | | mA | | 4 |
| Supply current (per amplifier) | ICC | | 0.8 | 1 | mA | VCC=+3 V; no load, Vicm = VCC/2; Tamb=25 °C | 4 |
| Supply current (per amplifier) | ICC | | | 1.2 | mA | VCC=+3 V; no load, Vicm = VCC/2; Tmin≤Tamb≤Tmax | 4 |
| Input offset voltage | Vio | | | 800 | µV | VCC=+5 V; Tamb=25 °C | 5 |
| Input offset voltage | Vio | | | 1500 | µV | VCC=+5 V; Tmin≤Tamb≤Tmax | 5 |
| Input offset current | Iio | | 1 | 30 | nA | VCC=+5 V; Vicm = VCC/2; Tamb=25 °C | 5 |
| Input offset current | Iio | | | 80 | nA | VCC=+5 V; Vicm = VCC/2; Tmin≤Tamb≤Tmax | 5 |
| Input bias current | Iib | | 30 | 70 | nA | VCC=+5 V; Tamb=25 °C | 5 |
| Input bias current | Iib | | | 150 | nA | VCC=+5 V; Tmin≤Tamb≤Tmax | 5 |
| Common mode rejection ratio | CMR | 60 | 90 | | dB | VCC=+5 V; Tamb=25 °C | 5 |
| Common mode rejection ratio | CMR | 55 | | | dB | VCC=+5 V; Tmin≤Tamb≤Tmax | 5 |
| Supply voltage rejection ratio | SVR | 65 | 90 | | dB | VCC = 4 to 5 V; Tamb=25 °C | 5 |
| Supply voltage rejection ratio | SVR | 60 | | | dB | VCC = 4 to 5 V; Tmin≤Tamb≤Tmax | 5 |
| Large signal voltage gain | Avd | 75 | 86 | | | Vo = 2 Vpk-pk, RL = 600 Ω; Tamb=25 °C | 5 |
| Large signal voltage gain | Avd | 70 | | | | Vo = 2 Vpk-pk, RL = 600 Ω; Tmin≤Tamb≤Tmax | 5 |
| High level output voltage | VOH | 4.7 | 4.8 | | V | RL = 600 Ω; Tamb=25 °C | 5 |
| High level output voltage | VOH | 4.7 | | | V | RL = 600 Ω; Tmin≤Tamb≤Tmax | 5 |
| Low level output voltage | VOL | | 80 | 300 | mV | RL = 600 Ω; Tamb=25 °C | 5 |
| Low level output voltage | VOL | | | 300 | mV | RL = 600 Ω; Tmin≤Tamb≤Tmax | 5 |
| Output short-circuit current | Isc | 10 | 20 | | mA | | 5 |
| Supply current (per amplifier) | ICC | | 0.95 | 1.2 | mA | VCC=+5 V; no load, Vicm = VCC/2; Tamb=25 °C | 5 |
| Supply current (per amplifier) | ICC | | | 1.3 | mA | VCC=+5 V; no load, Vicm = VCC/2; Tmin≤Tamb≤Tmax | 5 |
| Supply voltage | VCC | 2.7 | | 12 | V | | 3 |
| Operating free air temperature range | Toper | -40 | | 125 | °C | | 3 |
| Supply voltage | VCC | | | 14 | V | Voltages referenced to network ground | 3 |
| Differential input voltage | Vid | -1 | | 1 | V | If Vid > ±1 V, max input current ±1 mA with series resistor | 3 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 3 |
| Maximum junction temperature | Tj | | | 150 | °C | | 3 |
| ESD HBM: human body model | HBM | | | 1 | kV | 100 pF through 1.5 kΩ | 3 |
| ESD MM: machine model | MM | | | 100 | V | 200 pF, no series resistor | 3 |
| ESD CDM: charged device model | CDM | | | 1.5 | kV | | 3 |
| Latch-up immunity | | | | 200 | mA | | 3 |
| Thermal resistance junction-to-ambient, SOT23-5 | Rthja | | 250 | | °C/W | Typical value | 3 |
| Thermal resistance junction-to-case, SOT23-5 | Rthjc | | 81 | | °C/W | Typical value | 3 |
| Input offset voltage drift | ΔVio/ΔT | | 2 | | µV/°C | | 4 |
| Gain bandwidth product | GBP | | 3 | | MHz | RL = 10 kΩ, CL = 100 pF | 4 |
| Slew rate | SR | | 1 | | V/µs | RL = 10 kΩ, CL = 100 pF | 4 |
| Equivalent input noise voltage | en | | 25 | | nV/√Hz | f = 1 kHz | 4 |
| Total harmonic distortion | THD | | 0.01 | | % | Vout = 4 Vpk-pk, F = 10 kHz, AV = 2, RL = 10 kΩ | 4 |
| Input offset voltage drift | ΔVio/ΔT | | 2 | | µV/°C | | 5 |
| Gain bandwidth product | GBP | | 3 | | MHz | RL = 10 kΩ, CL = 100 pF | 5 |
| Slew rate | SR | | 1 | | V/µs | RL = 10 kΩ, CL = 100 pF | 5 |
| Equivalent input noise voltage | en | | 25 | | nV/√Hz | f = 1 kHz | 5 |
| Total harmonic distortion | THD | | 0.01 | | % | Vout = 4 Vpk-pk, F = 10 kHz, AV = 2, RL = 10 kΩ | 5 |
## CAD (KiCad official)
- Symbol: `TS9511IYLT`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `ts9511iylt-etched.step` / `ts9511iylt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ts9511iylt.step` / `ts9511iylt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589882044781400064) (11 pp, sha256 `335dcfc50c3ea30a`, retrieved 2026-10-01, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ts9511iylt-datasheet.pdf)